Appendix G

                                                                                                                         20




5. Response to Council’s Information
   Request
The traffic engineering related issues highlighted by Council within the “Noosa Council’s
Conditions”: and the response to each of the items is presented as follows.


        Noosa Council’s Condition 2.9

“Land Use
2.     An amended Plan of Development and Development Code shall be submitted to Council prior to
       any further development applications being made and shall include the following to the reasonable
       satisfaction of the Manager, Land Use:

         2.9. The car parking shown in the road reserve to Cooroy Noosa Road shall be deleted, with all
              car parking required for the development to be provided on site.”


        Response to Condition 2.9

As detailed within section 3.3 of this report, the redevelopment of Carramar Aged Care Facility
will provide a total of 88 car parking spaces (including 1 ambulance bay) for the ultimate design
of the aged care facility. This is in compliance with The Noosa Plan.


        Noosa Council’s Condition 16

“Roadworks Widening
“16.   The existing intersection at Cooroy Noosa Road shall be upgraded, at no cost to Council, to
       AUSTROADS — CHR standard, including median island, separate right hand turn lane, and the
       necessary pavement widening prior to the commencement of the next stage. In this regard, plans
       detailing this work shall be prepared and submitted to Council for approval prior to obtaining a
       Development Permit for Operational Works.”


        Response to Condition 16

As detailed in section 4.2 within the traffic report, the existing Cooroy-Noosa Road / Carramar
Access / Access to Local Development intersection of type BAR/BAL is recommended to be
upgraded to be of a type CHR standard / BAL. The proposed new layout of the Cooroy-Noosa
Road / Carramar Access / Access to Local Development intersection, modified to comply with
current standards (with a type CHR standard), is shown in Figure A1 within Appendix A.




                                                                                                      4516 - TIA - 004(1) .doc