Original source · versioned page text
MCU14/0056 Response to SARA - Consulting Report
The original of this document is very large (24.7 MB). Opening the original or downloading it may take a few minutes. Please be patient and don't click again. The page text is quick to read. If you are on mobile data, it is best to wait until you are on Wi-Fi.
Original PDF page 155, section 1. The text section number identifies this passage in the reader.
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawnOilSET-1000 Oil Separator Alarm Device D15383Be
Installation and Operating Instructions
1 GENERAL
OilSET-1000 is an alarm device for monitoring the thickness of the oil
layer accumulating in an oil separator. Depending on the order, the
delivery consists of OilSET-1000 control unit, SET/DM3D probe and a
cable joint.
Figure 1. Oil separator alarm system
SET/DM3D probe is installed into the light liquid storage chamber and
gives an alarm when the chamber is filled to a pre-determined degree.
The probe is normally immersed in water.
The function is based on the measurement of the electrical
conductivity of the surrounding liquid – water conducts electricity
much better than oil.
Oil separator is regarded as potentially explosive (Ex) area.
SET/DM3D probe can be installed in a zone 0, 1 or 2 potentially
explosive area but the control unit must be mounted in a safe area.
The LED indicators, push buttons and interfaces of the OilSET-1000
control unit are described in figure 2.
Figure 2. OilSET-1000 control unit - features
Copyright © 2010 3/10 We reserve the right for changes without notice
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalVery large file: the download may take a few minutes. If you are on mobile data, it is best to wait until you are on Wi-Fi.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.