Council archive · source document
Appendix G - Code Responses · MCU23/0070
LANDSLIDE HAZARD OVERLAY CODE
Table 8.2.8.3 - Criteria for assessable development
LANDSLIDE HAZARD OVERLAY CODE
Performance Outcomes Acceptable outcomes Applicant’s Comments
Landslide Hazard
PO1 AO1.1 Complies
Development maintains the safety of people, Development, including associated access, is A site specific geotechnical report has been
property and hazardous materials stored in not located on land identified as a landslide prepared in accordance with the landslide
bulk from the risk of landslide. hazard area on a Landslide Hazard Overlay hazard overlay code. The report includes
Map; recommendations for implementation through
construction and throughout the life of the
OR development.
AO1.2
Development, including associated access, is
located outside moderate, high and very high
landslide hazard areas and areas with
15% slope or greater, as determined by a site-
specific slope-analysis;
Editor's Note—A site- specific geotechnical
assessment may be used to demonstrate that
although the proposed development is shown
on the Landslide Hazard Overlay as being in
the moderate, high or very high landslide
hazard area, the landslide risk is low or very
low.
OR
AO1.3
A site-specific geotechnical assessment is
prepared by a registered professional engineer
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Appendix G - Code Responses.pdfRelated documentApplication case desk ↗
About this file
- File size
- 634 KB (small file)
- File type
No other editions are linked here.