Development Application Part 1 of 2 - Cover Letter - IDAS Forms 1 and 6 - OPW13/0022

to the application.


Applications for building work (including extensions and assessable demolition)
Floor plans drawn to an appropriate scale (1:50, 1:100 or 1 :200 are                  o Confirmed
recommended scales) which show the following:
                                                                                      o Not applicable
.    the north point
.    the intended use of each area on the floor plan (for commercial, industrial
     or mixed use     developments only)
.    the room layout (for residential development only) with all rooms clearly
     labelled
.    the existing and the proposed built form (for extensions only)
.    the gross floor area of each proposed floor area.

Elevations drawn to an appropriate scale (1:100, 1 :200 or 1 :500 are                 o Confirmed
recommended scales) which show plans of all building elevations and
facades, clearly labelled to identify orientation (e.g. north elevation).
                                                                                      o Not applicable
Plans showing the size, location, proposed site cover, proposed maximum               o Confirmed
number of storeys, and proposed maximum height above natural ground level
of the proposed new building work.
                                                                                      o Not applicable
Plans showing the extent of any assessable demolition.                                o Confirmed
                                                                                      o Not applicable
Applications for operational work involving earthworks (filling and excavating)

drawings showing:
                                                                       .
                                                                                      ~Confirmed
.
     existing and proposed contours                                                   o Not applicable
.areas        to be cut and filled
.    the location and level of any permanent survey marks or reference
     stations used as datum for the works
,.   the location of any proposed retaining walls on the relevant land and their
     height
.    the defined flood level (if applicable)
.    the defined fill level (if applicable).

Applications for operational work involving roadworks
                                                ~




Drawings showing:                                                                     ~Confirmed
.
     existing and proposed contours                                                   o Not applicable
.    the centreline or construction line showing chainages, bearings, offsets if
     the construction line is not the centreline of the road and all intersection
     points
.    information for each curve including tangent point chainages and offsets,
                 length, tangent length, superelevation (if applicable) and
     curve radii, arc

       widening (if applicable)
     curve

.kerb lines including kerb radii (where not parallel to centreline) and
 tangent point changes (where not parallel to centreline)
.
 edge of pavement where kerb is not constructed
.
 position and extent of channelisation
.location and details of all traffic signs, guideposts, guardrail and other
     street furniture
.
     pavement markings including details on raised pavement markers
.
     catchpit, manhole and pipeline locations
.
 drainage details (if applicable)
.cross road drainage culverts (if applicable)
.concrete footpaths and cycle paths
.location and details for access points, ramps and invert crossings


3                                                   IDAS form 6-Building or operational work assessable against a planning scheme
                                                                                                   Version 2.0 17 December 2012