Skip to the record
Beware of cheap imitations.

Council archive · source document

Delegated Report - Code - Planning MCU25 0099 - As Published · MCU25/0099

of 17

Text shows just the words. Original shows the document exactly as it was published.

               2.     DECISION DETAILS

               Council decided to issue the following type of approval:
               •      Development Permit for a Material Change of Use - Educational Establishment
               3.     CURRENCY PERIOD OF APPROVAL

               The currency period for this development approval is stated in the conditions below.
               4.     ASSESSMENT MANAGER CONDITIONS

               PLANNING
                      When Conditions must be Complied With
               1.     Unless otherwise stated, all conditions of this Decision Notice must be complied with prior to
                      the use commencing, and then compliance maintained at all times while the use continues.
                      Currency Period
               2.     This development approval lapses if the use has not happened by 18 November 2031 unless
                      an application to extend the currency period is approved by Council.
                      Approved Plans
               3.     Development authorised by this approval must be undertaken generally in accordance with
                      the Approved Plans listed in the table below.

                         Plan No.           Rev.    Plan/Document Name                             Date

                         1                  -       Site Plan, prepared by Just Sheds              -

                         A1 - 101           A       Site Plan and Typical Fence Elevation, 23/08/2024
                                                    prepared by Soul Space Building Design

                         6 of 7             -       Elevation (Shed A), prepared by Just Sheds 12/12/2023

                         -                  -       Elevation and Floor Plan         (Shed    A), 12/12/2023
                                                    prepared by Just Sheds

                         6 of 7             -       Elevation (Shed B), prepared by Just Sheds 12/12/2023

                         -                  -       Elevation and Floor Plan         (Shed    B), 12/12/2023
                                                    prepared by Just Sheds

                         6 of 7             -       Elevation (Shed C), prepared by Just Sheds 12/12/2023

                         -                  -       Elevation and Floor Plan         (Shed   C), 12/12/2023
                                                    prepared by Just Sheds

                      Building Height
               4.     The maximum height of the development must not exceed 8 metres above the ground level.
                      Vegetation Clearing
               5.     Vegetation clearing for the proposed sheds must be undertaken in accordance with the
                      Approved Reference Document (“Photo 1” provided by Applicant).
               6.     Fauna or fauna habitat relating to approved tree removal/clearing works must be managed
                      by a qualified person*.
                      *(Refer to Advisory Note)


                                                                                                       Page 13 of 17

Document Set ID: 24094674
Version: 8, Version Date: 17/11/2025

Used in these records

About this file

File size
6.1 MB (large file)
File type
PDF

No other editions are linked here.

Original file

Log in to download the original file

Delegated Report - Code - Planning MCU25 0099 - As Published.pdf · 6.1 MB (large file)

The download may take up to a minute.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.