RFI - Attachment 7 - Product Information - FoxDD600 System

SCHEMATIC DETAIL OF DD600 SYSTEM


[OCR of page images]
SCHEMATIC DETAIL OF DD600 SYSTEM

 

 

  

SPECIFICATIONS

Chamber Capacity 130 Litres

Material 6mm MDPE

Silt Basket Capacity 50 Litres
9mm holes

Diversion Valve

Flow Rate 12001/min
@.5m head

Grate Class 'B'
Galvanised

Available Option

 

150mm Stormwater Outlet
Class 'D' Grate

Note: Inverts will change.

Request details if required.

PROCESS DESCRIPTION

The Fox DD600 is a demand driven diversion
unit that is designed for use in an area where, at
the end of a wash activity the area will be hosed
clean of pollutants such as grease and oils. It is
most important that the area be left clean
as there is no protection for the
environment when a wash operation is not
taking place.

All runoff is presented through the grated inlet
and a polyethylene basket captures silt, solids
and free floating debris. This is removable for
disposal of captured pollutants.

A Fox Diversion Valve is fitted in the bottom of

the pit and is connected via a 3" drive line to the

Demand Valve by the installing plumber. This is
the signal line that will activate the diversion
valve when the demand for wash water is
detected.

During a wash operation all runoff is diverted to
a holding tank for treatment before exiting to the
sewer. Once the wash activity has ended the
valve will close allowing any rain to fill the
chamber and leave through the stormwater
outlet.

 

700

PLAN

Cold water supply min
100kPa. others) Must
be protected by RPZ.

|

Drive Line (by others)

  

Fox Demand

Class "B" Grate

Basket

All washdown points must
come from this point.
Non washdown points should

be from before Demand Valve.

Install Drive Line with 90°

 

"OD Copper tube

[|

bend to enable disconnection
at valve.

 

 

Basket

 

500

Fox Diversion
Valve

 

615 (Approx)

 

 

340

 100mm@ Outlet
To Stormwater

 

 

 

Elevation

  

100mm@ Outlet
To Tradewaste

Stormwater360
Beviween skvanpsea —\ J

 

 

FOX ENVIRONMENTAL
SYSTEMS

 

 

This is a schematic representation only. Slab size
and gradient to engineers details as arranged by
customer. All plumbing and electrical connections
to be installed by certified tradesmen in accordance
with relative authorities requirements. Tradesmen
to be engaged by the purchaser. System to be
approved by relative Local Authorities before
Installation.

This Drawing and design is the Property of Fox
Environmental Systems Pty Ltd. It must not be
used for any other purpose than that for which it
was issued,

 

 

 

Project
System Specifications

 

Drawing Title

DD600 System

 

 

 

 

 

 

Drawn by: J.F.S

Date: 20/10/2009
Scale: As Specified
Drawing No: A4-SPEC-1003/2