Original source · versioned page text
2020-07-16 SM Agenda - Item 1 - Attachment 5 - Final Noosa Plan 2020 Part 8-10 Schedules & Appendix
The original of this document is very large (19.9 MB). Opening the original or downloading it may take a few minutes. Please be patient and don't click again. The page text is quick to read. If you are on mobile data, it is best to wait until you are on Wi-Fi.
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawn Flooding and amenity functions Table 9.4.9.3 Criteria for assessment (part)
Performance Outcomes Acceptable Outcomes
Flooding and amenity functions operational works within Noosa Waters Estate waterways
PO23 AO23.1
The flood detention and amenity functions of the area adjacent to For premises adjoining a waterway within the Noosa Water
the revetment wall within Noosa Waters Estate are retained and estate, no building work, filling or excavation works within 4.5
enhanced by ensuring— metres of the centre line of the top of the concrete revetment wall.
(a) works do not protrude through a batter line of 1:4.5
measured from the centre line of the revetment wall; AO23.2
A minimum of 25% of the area within 4.5 metres of the revetment
(b) there is no additional load placed on the revetment wall;
wall is planted with shrubs and small trees with a mature height
(c) works do not pose a risk to the membrane adjoining the of 3 metres or less.
revetment wall;
(d) amenity of the waterway and surrounding land uses is not AO23.3
adversely affected by development (building, filling or The ground surface within the first metre of the revetment wall—
excavation) ensuring— (a) is grass or ground cover; and
(i) the 4.5 metre setback area is predominantly soft (b) does not include shrubs.
landscaping;
(ii) a maximum of 25% of the area is impervious; AO23.4
(iii) dominant impervious areas and masonry retaining Side boundary fences within 4.5 metres of the revetment wall
walls are avoided; taper down to a maximum height of 1.2 metres at the revetment
wall and no more than 1.5 metres at a distance of 2.25 metres
(iv) retaining structures and the like are light weight, low from the revetment wall.
rise and screened by landscaping;
(v) natural materials such as timber or rock are used
rather than manufactured materials;
(vi) the acoustic privacy and access to sunlight of
surrounding development is protected; and
(vii) views are not impeded.
PO24
No shore side anchor points are installed within 4.5 metres of the No acceptable outcome provided
centre line of the revetment wall.
PO25
No mooring, anchoring, tying or docking of vessels occurs No acceptable outcome provided
adjacent to the revetment wall.
Figure 9.4.9.3A & 9.4.9.3B
Character & Amenity
FIGURE 9.4.9.3A FIGURE 9.4.9.3B
NOOSA PLAN 2020 Page 128 of 150
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalVery large file: the download may take a few minutes. If you are on mobile data, it is best to wait until you are on Wi-Fi.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.