Original source · versioned page text
161216 2016039 Erindale Park CA
Attached to the e-mail Operational Works Application OPW16/0341.
Original PDF page 2, section 1. The text section number identifies this passage in the reader.
Landscape Specification Notes
SECTION 4 SOFTSCAPE NOTES
Concrete Paving:
SECTION 1 LANDSCAPE GENERAL NOTES SECTION 2 HARDSCAPE NOTES Surface Finish: Imported Soils:
All concrete surfaces shall be true and free from stone pockets, depressions or Planting areas shall have 200 mm minimum depth imported garden blend soil. Imported
General Construction Review and Certificates projections beyond the surface. Concrete slabs shall be vibrated to engineers SUNSHINE COAST
soils shall be augmented with Nutri-Store Gold, by Nutri-Tech Solutions, Yandina, QLD.
These Documents and Specification Notes are to be read in conjunction with The Contractor shall give the Contract Administrator two ( 2 ) working days notice of any specifications. Unit 7, Level 1, Capital One
Rate: 1kg bag per 35m2.
Callaghan and Toth Engineers documentation. review period. Review inspections shall be undertaken with the Contractors site 9 Capital Place
foreman/project manager in attendance with the Contract Administrator or subconsultant eg. Sediment control shall form part of any washing, abrasive blasting or cleaning processes. Birtinya, QLD 4575
Where there may be conflict or discrepency, the Contractor shall immediately notify Landscape Architect, Engineer designated to act in the Contract Administrators stead. Soil Augmentation and Fertilising T + 61 7 5499 6188
the Contract Administrator, who will determine the appropriate Specification. Company: Nutri-Tech Solutions F + 61 7 5499 6711
In addition to normal review of Works identified in each section of the specification, the
Protection of Existing Trees and Works Contract Administrator will require works review at the following key hold points: Slip Resistance: Phone: 07 5472 9900 © Place Design Group Pty Ltd A.C.N. 082 370 063
Protect existing trees to be retained and any previous landscape works. Minimise Fax: 07 5472 9999 All information displayed, transmitted or carried within this drawing is
protected by Copyright and Intellectual Property laws.
excavations within root zone of trees. a) Start-up meeting with Landscape Contractor, Civil Contractor and Council The information contained in this document is confidential.
b) Setout of all items (planters, pathways and paving, walls, shelters, furniture, lighting etc.) (low risk of slip when wet for flat surfaces) slip resistance in accordance with AS/NZS Recipients of this document are prohibited from disclosing the information
Cultivation: (Existing Subgrade) herein to any person without the written consent of Place Design Group.
Finished Levels and Grades c) Footings, concrete formwork, conduit review.(Structural engineer to certify footings and 4586. Any sealants used must not reduce the slip resistance of the pavements. The Annotated dimensions take precedence over any measures of scale.
Verify all dimensions on site prior to construction.
Refer to the Levels Drawing for detailed design levels and contours. All pedestrian reinforcing) Contractor is to certify the slip resistance of all finished and sealed surfaces to the Cultivate all planting areas to a minimum depth of 150mm. This drawing may display with permission a combination of specialist and
other consultant(s) input and linework.
pavements shall meet AS1428 requirements for equitable access throughout. d) Earthworks and grading minimum stated classifications in accordance with AS/NZS 4586. Nominated specialist and consultant information contained within this
e) Drainage works Planting:
document is referenced from their supplied documentation and is
contained in this document as indicative only and not for construction or
Services f) Soil augmentation and placement certification purposes.
Verify location of all services on site prior to commencement of Landscape Works. j) Plant stock inspection/approval prior to delivery to site THE CONTRACTOR MUST HAVE A WATER TANK OR TAP WATER SUPPLY
DURING ALL PLANTING OPERATIONS TO MIX AND APPLY SOIL AUGMENTATION PROJECT
Undertake DBYD investigations and ensure DBYD documentation is kept on site. h) Plant Setout prior to planting Joint Sealant:
Contractor is responsible to make good any damage to services or other works. i) Practical Completion RECOMMENDATIONS.
Joint sealant per Engineer's requirements. Sealant colour shall match or complement ERINDALE PARK PLAY
j) Completion of Defects concrete and/or adjacent surface finish. Colour of joint sealant shall be to Landscape
NOTE WELL: Services run through the site, locate prior to commencing k) On- Maintenance Architects approval / selection. Plant material handling is important. The plant material must be monitored and not
SPACE COOROY
works and take all necessary precautions to protect services. l) Off-Maintenance allowed to dry out while in storage. Bring only the plants that are required for that
CLIENT
particular days setout to the area to be planted.
All structural, hydraulic and electrical work is to be Certified by a registered and authorised
Maintenance testing authority / engineer.
PLANTING PROCEDURES-
VALKEV PTY LTD
Establish and maintain works for a period of twenty six (26) weeks during which
make good defects after the issue of the Certificate of Practical Completion by the The Contractor shall seek confirmation of inspection points from the appropriate engineer Planting for trees and shrubs should be completed in one continuous operation as
Contract Administrator. Maintain acceptable horticultural practices, as well as and/or approval authority prior to work commencing. outlined below. NOTES
rectifying defects that become apparent in the works under normal use. ALL MEMBER SIZES, CONNECTIONS, FOOTINGS ETC
Site Work / Grading: ARE TO BE CONFIRMED BY AN ENGINEER. SIZES
1. Stake out tree locations or setout shrub plantings for review and approval NOMINATED ARE INDICATIVE OF FINAL APPEARANCE
Finish Levels - Finished levels as provided on the civil and landscape drawings. Kerb levels, REQUIRED. CONTRACTOR IS TO PROVIDE SHOP
Weekly Maintenance Tasks:
overland flow paths, existing footpaths etc., are set and the contractor should work to by landscape architect. DRAWINGS FOR APPROVAL BEFORE COMMENCING
Shall include weeding, pruning, insect & disease control, debris removal, hand CONSTRUCTION.
achieve nominated levels. Excavation will need to take place to allow for correct placement Adjust for any conflicts with utilities etc.
watering as required, inspect and adjust furniture, lighting and hardscape items to to finished levels. Excess site spoil is to be removed from site. ALL WATER PROOF MEMBRANES, HYDRAULIC
maintain high visual landscape quality. Maintenance site visits shall be no less than 2. Excavate pits for street trees or shrubs. FITTINGS, ELECTRICAL / LIGHTING FITTINGS AND
REINFORCED CONCRETE STRUCTURES ETC TO
1 day per week to monitor and maintain the landscape. Maintain playspace Co-ordination with all other trades is required. 3. Pit sizes - Width is 2 x Diameter and Depth is Height of Rootball + 200mm. ENGINEERS, ARCHITECTS, HYDRAULIC ENGINEERS,
equipment and softfall surfacing in accordance with the suppliers and installers 150mm depth ripping to base of pit excavation. ELECTRICAL ENGINEERS DETAILS AND
SPECIFICATIONS.
recommended maintenance procedures. The Contractor is to: SIZES NOMINATED ARE INDICATIVE OF FINAL
4. Set tree plumb and at the appropriate elevation, allow for settling with APPEARANCE REQUIRED
- comply with all approvals and applicable Council standard procedures adjudicated topsoil lightly compacted.
The fertilising program will be per Soil Augmentation & Fertilising. Reapply
Nutristore Gold product as specified in Soil Augmentation & Depth at 3 month - provide erosion and sediment control measures to any disturbed areas caused Set shrubs and face in visually cohesive groupings.
intervals. Apply foliar spray after planting and every 3 weeks there-after. Foliar by landscape works. Such measures shall be per Council standard procedures.
5. Backfill with imported topsoil in layers to avoid air pockets. Lightly compact
spray shall consist of Nutritech Solutions products KFF Foliar and CMB Trio. Apply - carry out trimming of any disturbed areas caused by landscape works.
- implement dust control measures to disturbance caused by landscape works. and water settle in layers.
per Nutri Tech Solutions recommendations.
- remove soil and other debris from roadways at the end of each day. 6. Construct temporary earthen watering basins and water regularly to establish planting.
- remove all waste from site. Bins to be provided by Contractor.
All maintenance shall be performed by qualified and experienced personnel. - develop a traffic and pedestrian control plan, seek approval and implement in full.
Maintenance of softscape shall be by personnel with horticultural training and - take all necessary precautions for the safety of the public, the Contractor's employees and Plant Guying
FOR APPROVAL
experience (evidence of qualifications and experience for key personnel shall be conform to all of the regulations as required by The Workplace Health & Safety Act 1995 and All trees shall be guyed per the Typical Tree in Garden Bed detail
provided upon request). all subsequent amendments in addition to Council's requirements and conditions.
ISSUE CODE ISSUE DESCRIPTION BY CHK DATE
Mulching 01 PRE PRELIMINARY AL BS 8-12-2016
Hardscape Installation: 02 CA FOR APPROVAL AL BS 15-12-2016
Setout shall be by a licenced surveyor and is to be reviewed in the field by the landscape Planter beds - Install 100mm depth of consolidated 25mm Hoop Pine Curls mulch to be
architect prior to construction. All concrete pathways are to be constructed and reinforced 20mm below top of edging (Keep mulch clear of main stem as much as possible).
per engineers typical details and council requirements.
In general - hardscape items are to be set at finished levels as discussed above.
Curvilinear surfaces are to be installed with smooth continuous curves shown on the
drawings with no flat or angular transitions between curves or forming members. Setout of
curves shall be to the landscape architects approval.
PRE - Preliminary | CA - Council Approval | T - Tender | CON - Construction
DRAWING TITLE
LANDSCAPE
SPECIFICATION NOTES
DESIGN : BS
DOCUMENT : AL,BS
PROJECT : 2016039
SCALE AS SHOWN @ A1
DRAWING NUMBER REVISION
2016039-001 02
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
Large file: the download may take up to a minute.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.