Venture Drive Landscape Issue B Sheet 3 - MCU17.0560

 

 

LANDSCAPE MAINTENANCE SPECIFICATIONS LANDSCAPE PROPOSAL

Plant large screening shrubs and canopy trees to soften the 6m high concrete wall
Landscape works are to include the following: along the western boundary of the lot.

Trees near car parking areas shall be clear trunked to 1.2m

and planted at least 650mm away from the back of the kerb.

 

 

1. Organic mulch shall be spread around the plants to a depth of 150mm. All mulch is to be graded away from the trunk

to avoid placement against green plant stems. Mound planting beds slightly to improve drainage (falls are to be directed away from the building).
2. All new plantings with a pot size equal to or greater than 25 litre are to be tied and supported in accordance with the Provide hardwood timber edging between lawn areas and new planting beds.

TYPICAL TREE PLANTING DETAIL (refer to Sheet 2). Rei vti vcs “4:

einstate the existing garden bed on the verge, which is in a poor condition.

Please note: One Banksia integrifolia will replace a dead street tree and must comply with the NATTSPEC SPECIFICATIONS. Replace one dead Banksia integrifolia with a new Banksia integrifolia in 25 L (300mm) pot size.
3. Plant quality shall be well presented, hardened-off nursery stock, grown in soil, well branched and well Eradicate all weeds und supply new mulch.

foliated and true to species and variety. Trunks and branches shall be sturdy and uniformly distributed to form a well branched plant.

Scars shall be free from rot and pruning scars shall be clean cut to leave little or no protrusion from trunk or branch.

Leaves shall be normal size, shape and colour.

 

 

 

 

 

 

 

 

Satuwhy Ht MEL pac} i) z
. B CAL Cag Existing timber edge
6 FIC) nod

 

ROOF

 

 

  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the NATSPEC specifications

 

 

4. Setting out of trees shall be in accordance with the detailed locations shown on the landscape plan. 1 ELA ret Existing Banksia integrifolia
5. All plantings must receive a slow release agri-form fertiliser tablet with water crystals. LIP K to be retained
6. Water thoroughly all planting stock and maintain incorporating best horticultural industry best practices. [ x Replace 1 dead Banksia integrifolia
7. Amaintenance period of 12 weeks includes monitoring of plant performance with remedial action as required. + es 5 with a healthy Banksia integrifolia in 25 L
f 3 : ,
Watering of plants and weeding as required . Parkin - a and plant the tree in accordance with
3
3
ia

Existing Banksia integrifolia

0
2
PROPOSAL: BOLLARDS IN FRONT GARDEN & z eM tobe retained
t Existing timber edge
Le
of
—

 

 

             

 

 

 

 

 

 

 

SHRUBS AND GROUNDCOVER SHALL BE SCREEN FOR BIN AREA oa

 

 

 

 

 

 

PLANTED IN SUFFICIENT DENSITIES AND //7 ~ 8A \- = Approx. location of streetlight
ACHIEVE A NATURAL LOOK SIMILAR TO REFER TO Existing pedestrian path 1.5m wide
THE PICTURES BELOW — PLANTS SHALL — aaa
NOT BE HEDGED IN ANY WAY,
FIC nod SHEET 1 STREET TREES SCALE 1: 200

 

 

 

 

 

MEL|pac
00

B CAL LJ
1 CUP ana
i” FIC nod
8 LOM con

 

 

 

 

LANDSCAPE PROPOSAL

Install in-situ bollards
in the front gardens
as detailed below.

 

 

 

 

 

 

 

 

  

 

 

 

 

 

 

 

 

 

 

  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IL BOX = =
, EXAMPLE OF A HARDWOOD TIMBER BOLLARD
cs aL ae BOLLARDS
SHRUB WITH PURPLE FLOWERS: 0.9m HICH BY MOODIE OUTDOOR PRODUCTS.
MELASTOMA MALABRATHICUM IN—SITU MI @ INSTALL IN-SITU BOLLARDS AT 1.2m INTERVALS AS INDICATED
4 LOM : ON THE LANDSCAPE PLAN SHEET 1 AND THE DRAWING TO THE LEFT.
con - RETAIN A MINIMUM DISTANCE OF 500mm TO THE EDGES OF THE
1.2m HIGH DRIVEWAY DRIVEWAY.
SHRUBS WITH COLOURFUL LEAVES: BOLLARD BOLLARDS ARE TO BE 900mm HIGH UNLESS SPECIFIED OTHERWISE
CALLISTEMON ’GREAT BALLS OF FIRE <b & CROSS-— AND TO BE CONSTRUCTED WITH CONCRETE FOOTINGS
5 DRIVEWAY re OVER TO TO ENGINEER’S SPECIFICATIONS & AUSTRALIAN STANDARDS.
?
BN ENGINEER S @ THE PROPOSED IN-SITU BOLLARD AT THE PARKING SPACE FOR
— 3 BOLLARDS DETAILS DISABLED PEOPLE (ONE BOLLARD MARKED IN BLUE) HAS TO BE 1.2m HIGH.
PLANTING 0.9m_H. MIN.
©
DETAILS ON 1 2 OC Oo : ENVIRONMENTAL LANDSCAPE PLANNING PROJECT: DRAWING TITLE: ]
SHEET 1 N © Principal: Mark Bizzell i OPERATIONAL WORKS LANDSCAPE | LANDSCAPE PLAN
Mount Coolum 4573 Qld PLAN - SPECIFICATIONS
N Mobile: 0431 123 419 AT No. 10 VENTURE DRIVE DWGNo. LP-03
E > bi - @| . F NOOSAVILLE, QLD — .
<2 J LO con mal [email protected] L ISSUE: B
| NY CA LJ COPYRIGHT: No reproduction of all or part EET TE Ne TY Ltp| SCALE: AS SHOWN
i of this drawing may be undertaken without the P DATE: 31 JANUARY 2018
i f th . DESIGNER: MB
SCALE 1: 1 00 i CU ana express written permission of the author. 30F3