Council archive · source document
proposal plans · MCU25/0057
Plans and drawings: the text below has words only, no drawings.
Very large file (10.7 MB): may take a few minutes to open.
skale
building design
9 George Street Noosaville
DA02 Development application issue 16/5/2025
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalFull text of the other 21 pages
Page 2
skale
building design
9 George Street Noosaville
DA02 Development application issue 16/5/2025
9 George Street
skale
building design
Page 3
skale
building design
9 George Street Noosaville
DA02 Development application issue 16/5/2025
9 George Street
skale
building design
Page 4
skale
building design
9 George Street Noosaville
DA02 Development application issue 16/5/2025
9 George Street
skale
building design
Page 5
♻ play your part - print on recycled paper
5m 4 3 2 1
Abodo Vulcan in Sioo:x (Weathered), bandsawn cladding
B
28.777m, 89° 58' 0.00" installed in accordance with manufacturers specifications.
Knotwood Hinoki aluminium pergola roof
bdy to roof
bdy to roof
battens over shown dashed. Battens to be bin
bdy to wall
bdy to wall
1,513
1,513
150 x 50mm sections (300mm typical. store
2,013
2,013
spacing) to have concealed fixings in
accordance with manufacturers 2,125
specifications.
6,048
bdy to roof Knotwood Hinoki aluminium pergola roof battens over
Pdr 1 shown dashed. Battens to be 150 x 50mm sections
Tiled wc (300mm typical. spacing) to have concealed fixings in
Line of sewer as plotted from UnityWater b accordance with manufacturers specifications.
records. Outdoor Dining 600
Tiled
up
A 6,504 A
bdy to wall
Dining
mail
box
Tile
1,200
Rebated niche in concrete block wall to have Anodised
Concrete block wall to be constructed in aluminium (Pale bronze) signage with LED backlighting
ref
accordance with structural engineers design and framed niche surround. Refer to fence details for
and detail. Wall to be finished with acrylic further information.
lift
render system with fine sand finish and wo
painted. Concrete driveway to be in accordance with structural
t wm dry engineers design and detail. Provide selected coloured/
Kitchen feature exposed aggregate blend to manufacturers
pool
Lounge Garage
Tiled
Laundry Epoxy
specifications. Driveway to comply with AS2890.1.
Landscaped court to provide privacy Tiled s Tile Driveway to connect to existing crossover in accordance
screening. with local authority regulations. Driveway grades to be in
dw accordance with AS2890.1.
Knotwood Hinoki aluminium battens to form fence/gate.
Drying court Battens to be 100 x 25mm sections (125mm max.
U2
pty
Tile spacing typical) to have concealed fixings in accordance
with manufacturers specifications. Panels to be self-
6,015 6,033 supported with 12mm threaded rods & 20mm anodised
bdy to wall bdy to wall aluminium spacer set down 300mm from top of battens.
Concrete block wall to be in accordance with structural
U1
6,468
bdy to wall engineers design and detail. Provide Crackenback stone
Knotwood Hinoki aluminium battens to form facing by Eco outdoor.
fence/gate. Battens to be 100 x 25mm Drying court
pty
sections (125mm max. spacing typical) to Tile
have concealed fixings in accordance with
manufacturers specifications. Panels to be
dw
self-supported with 12mm threaded rods &
20mm anodised aluminium spacer set down Garage
Lounge s Laundry
300mm from top of battens. Tile Epoxy
Tiled Kitchen
22.964m, 177° 8' 44.08"
22.943m, 178° 33' 0.00"
pool Tiled
t wm dry
wo lift
ref
Boundary fence - Concrete block wall to be 1,800
constructed in accordance with structural Dining 6,803
Tile bdy to wall
engineers design and detail. Wall to be
finished with acrylic render system with fine
sand finish and painted. up
Outdoor Dining
Tiled 2,125
b
Pdr 1 wc
Tiled
6,528
bdy to roof
bdy to wall
bdy to wall
bdy to roof
bdy to roof
2,013
2,013
6,245
1,513
1,513
Bdy to roof beam bin
store
29.340m, 89° 58' 0.00"
B
Conceptual plan - Ground floor
1:100
/Users/benthornton/Documents/Cadfiles/2503 - Palazzesi - 9 George/Archicad/
15052025/2503.pln
sbt designs pty ltd t/a
Skale Building Design project Duplex lot no. 8 DA02 Development application issue 16/5/2025
project number
Mobile: 0412 025 657
for Ross Palazzesi plan no. RP72243 DA01 Development application issue 25/3/2025
2503
skale skale.com.au
TP02 Planning issue 16/3/2025
9 George Street drawn BT
TP01 Planning issue 12/3/2025
drawing number
[email protected]
building design A.C.N. 123 976 296 QBCC: 1143 609 at Noosaville scale (A3) 1:100 Rev Details Date 05 DA02 © Skale Building Design
Page 6
♻ play your part - print on recycled paper
5m 4 3 2 1
Knotwood Hinoki aluminium pergola roof battens. Battens
to be 150 x 50mm sections (300mm typical. spacing) to
B
28.777m, 89° 58' 0.00" have concealed fixings in accordance with manufacturers
Knotwood Hinoki aluminium pergola roof specifications.
bdy to roof
bdy to roof
battens. Battens to be 150 x 50mm sections
bdy to wall
1,513
1,513
6,048
2,013
(300mm typical. spacing) to have concealed
fixings in accordance with manufacturers 6,237 bdy to roof
bdy to roof
specifications.
Abodo Vulcan in Sioo:x (Weathered), bandsawn cladding
installed in accordance with manufacturers specifications.
Framed awning roof to be constructed in
accordance with structural engineers design
and detail. Roof to have Emerproof water
Anodised aluminium framed screen with 25 x 25mm
proofing barrier and to be finished with
Hinoki Knotwood aluminium battens to each side of
acrylic render system with fine sand finish
void frame.
and painted. up
A A
Line of walls under shown dashed. Terrace
Tile
Abodo Vulcan in Sioo:x (Weathered), bandsawn cladding
desk
linen
installed in accordance with manufacturers specifications.
COLORBOND® ultra steel parapet flashing
to be fixed in accordance with manufacturers
specifications. Parapet flashing to have fall duct 6,865
towards roof, provide Anti-capillary break to 6,855
void
lift bdy to wall
be provided to fascia/flashing junction in bdy to wall linen
accordance with NCC 3.5.1.7 .
Timber framed walls to be constructed in
accordance with structural engineers design
robe
and detail. Walls to have Hebel wall panels
Mastersuite Bedroom 2
finished with acrylic render system with fine Timber
b
b
Timber shr
sand finish and painted. Master Bathroom
Ensuite Tile Bedroom
lift 3
Tile wc wc Timber Line of roof over shown dashed.
robe
shr 6,033
6,015 bdy to roof
robe
bdy to roof
robe
6,534
Knotwood Hinoki aluminium pergola roof 6,468
shr bdy to wall
battens. Battens to be 150 x 50mm sections bdy to roof
(300mm typical. spacing) to have concealed
robe
fixings in accordance with manufacturers Timber framed walls to be constructed in accordance with
Master wc wc Bedroom
lift
3 structural engineers design and detail. Walls to have
specifications. Bathroom Timber
Ensuite Hebel wall panels finished with acrylic render system with
Tile
Tile
shr fine sand finish and painted.
Mastersuite b b Bedroom 2
Timber Timber
robe
Void/daylight opening to form light well to
22.943m, 178° 33' 0.00"
22.964m, 177° 8' 44.08"
drying court.
linen
void
lift
7,127 duct
bdy to wall
linen
Fabriacted anodised aluminium 50 x 10mm
desk
bars @ 100mm cts. with 70 x 10mm top rail Terrace
Tile
to provide balustrade in accordance with
ABCB Housing Provisions Standard 2022 : Knotwood Hinoki aluminium pergola roof battens. Battens
11.3. Balustrade to be a min. 1000mm high to be 150 x 50mm sections (300mm typical. spacing) to
up
above finished floor level. have concealed fixings in accordance with manufacturers
specifications.
Knotwood Hinoki aluminium pergola roof
battens. Battens to be 150 x 50mm sections
(300mm typical. spacing) to have concealed
fixings in accordance with manufacturers
specifications.
bdy to wall
6,528
bdy to roof
bdy to roof
2,013
6,245 bdy to roof
1,513
1,513
bdy to roof
29.340m, 89° 58' 0.00"
B
Conceptual plan - First floor
1:100
/Users/benthornton/Documents/Cadfiles/2503 - Palazzesi - 9 George/Archicad/
15052025/2503.pln
sbt designs pty ltd t/a
Skale Building Design project Duplex lot no. 8 DA02 Development application issue 16/5/2025
project number
Mobile: 0412 025 657
for Ross Palazzesi plan no. RP72243 DA01 Development application issue 25/3/2025
2503
skale skale.com.au
TP02 Planning issue 16/3/2025
9 George Street drawn BT
TP01 Planning issue 12/3/2025
drawing number
[email protected]
building design A.C.N. 123 976 296 QBCC: 1143 609 at Noosaville scale (A3) 1:100 Rev Details Date 06 DA02 © Skale Building Design
Page 7
♻ play your part - print on recycled paper
5m 4 3 2 1
B
28.777m, 89° 58' 0.00"
bdy to eave gutter
bdy to pitched roof
2,013
6,072
3,013
6,225 bdy to eave gutter
bdy to eave gutter
5° pitch
A A
STRATCO 200mm Edge gutters in
COLORBOND® steel to be fixed in
accordance with manufacturers
specifications. 180 x 30mm h3 treated
primed timber fascia. Gutters to have 10mm Timber/steel framed roof to be in accordance with
pv structural engineers design and detail. Provide
spacers to fascia to provide overflow point.
5° pitch COLORBOND® steel folded standing seam roof with fall
to COLORBOND® steel folded eave gutter in accordance
with hydraulic engineers design and detail.
COLORBOND® steel Custom Orb oof
sheeting to be fixed in accordance with
manufacturers specifications.
STRATCO 200mm Edge gutters in COLORBOND® steel
to be fixed in accordance with manufacturers
specifications. 180 x 30mm h3 treated primed timber
fascia. Gutters to have 10mm spacers to fascia to provide
overflow point.
void
6,048
bdy to eave gutter
6,000
bdy to eave gutter void
Void/daylight opening to form light well to
drying court.
COLORBOND® steel Custom Orb oof sheeting to be
fixed in accordance with manufacturers specifications.
Timber/steel framed roof to be in accordance
with structural engineers design and detail.
22.943m, 178° 33' 0.00"
22.964m, 177° 8' 44.08"
Provide COLORBOND® steel folded
standing seam roof with fall to
COLORBOND® steel folded eave gutter in 5° pitch
accordance with hydraulic engineers design
and detail.
STRATCO 200mm Edge gutters in
COLORBOND® steel to be fixed in
accordance with manufacturers
specifications. 180 x 30mm h3 treated
primed timber fascia. Gutters to have 10mm
5° pitch
spacers to fascia to provide overflow point.
bdy to pitched roof
bdy to eave gutter
3,013
6,257
2,013
6,504
bdy to eave gutter
bdy to eave gutter
29.340m, 89° 58' 0.00"
B
Conceptual plan - Roof
1:100
/Users/benthornton/Documents/Cadfiles/2503 - Palazzesi - 9 George/Archicad/
15052025/2503.pln
sbt designs pty ltd t/a
Skale Building Design project Duplex lot no. 8 DA02 Development application issue 16/5/2025
project number
Mobile: 0412 025 657
for Ross Palazzesi plan no. RP72243 DA01 Development application issue 25/3/2025
2503
skale skale.com.au
TP02 Planning issue 16/3/2025
9 George Street drawn BT
TP01 Planning issue 12/3/2025
drawing number
[email protected]
building design A.C.N. 123 976 296 QBCC: 1143 609 at Noosaville scale (A3) 1:100 Rev Details Date 07 DA02 © Skale Building Design
Page 8
♻ play your part - print on recycled paper
5m 4 3 2 1
Knotwood Hinoki aluminium battens to form fence/gate. Battens to be
100 x 25mm sections (125mm max. spacing typical) to have
concealed fixings in accordance with manufacturers specifications.
Panels to be self-supported with 12mm threaded rods & 20mm
anodised aluminium spacer set down 300mm from top of battens.
8,500
Ceiling
2,740
5,760
First floor
Rebated niche in concrete block wall to have Anodised aluminium (Pale
bronze) signage with LED backlighting and framed niche surround. Refer to
4,450 4,450
fence details for further information.
3,060
3,650 3,650
3,450
2,800
2,800
2,700 2,700
2,000
1,800
1,800
Ground floor
1,650 ngl
1,450 ngl
Concrete block wall to be in accordance with structural engineers Boundary fence - Concrete block wall to be constructed in accordance with
design and detail. Provide Crackenback stone facing by Eco outdoor. structural engineers design and detail. Wall to be finished with acrylic
render system with fine sand finish and painted.
Concrete driveway to be in accordance with structural engineers
design and detail. Provide selected coloured/feature exposed Knotwood Hinoki aluminium battens to form fence/gate. Battens to be 100 x
aggregate blend to manufacturers specifications. Driveway to comply 25mm sections (125mm max. spacing typical) to have concealed fixings in
with AS2890.1. Driveway to connect to existing crossover in accordance with manufacturers specifications. Panels to be self-supported
accordance with local authority regulations. Driveway grades to be in with 12mm threaded rods & 20mm anodised aluminium spacer set down
accordance with AS2890.1. 300mm from top of battens.
Street Elevation
S1 1:100
/Users/benthornton/Documents/Cadfiles/2503 - Palazzesi - 9 George/Archicad/
15052025/2503.pln
sbt designs pty ltd t/a
Skale Building Design project Duplex lot no. 8 DA02 Development application issue 16/5/2025
project number
Mobile: 0412 025 657
for Ross Palazzesi plan no. RP72243 DA01 Development application issue 25/3/2025
2503
skale skale.com.au
TP02 Planning issue 16/3/2025
9 George Street drawn BT
TP01 Planning issue 12/3/2025
drawing number
[email protected]
building design A.C.N. 123 976 296 QBCC: 1143 609 at Noosaville scale (A3) 1:100 Rev Details Date 08 DA02 © Skale Building Design
Page 9
♻ play your part - print on recycled paper
5m 4 3 2 1
Abodo Vulcan in Sioo:x (Weathered), bandsawn cladding installed in
accordance with manufacturers specifications. Timber/steel framed roof to be in accordance with structural engineers
design and detail. Provide COLORBOND® steel folded standing seam
roof with fall to COLORBOND® steel folded eave gutter in accordance
COLORBOND® steel Custom Orb oof sheeting to be fixed in
with hydraulic engineers design and detail.
accordance with manufacturers specifications.
2,013 2,013 STRATCO 200mm Edge gutters in COLORBOND® steel to be fixed in
bdy to roof 9,445 bdy to roof accordance with manufacturers specifications. 180 x 30mm h3 treated
top of roof primed timber fascia. Gutters to have 10mm spacers to fascia to
5.0° 5.0° provide overflow point.
8,920
8,500
Ceiling
Anodised aluminium framed screen with 25 x 25mm Anodised aluminium framed screen with 25 x 25mm Hinoki Knotwood
Hinoki Knotwood aluminium battens to each side of aluminium battens to each side of frame.
2,740
frame. 1,513
o/a building height above ngl
1,513
bdy to roof bdy to roof Abodo Vulcan in Sioo:x (Weathered), bandsawn cladding installed in
accordance with manufacturers specifications.
5,840 5,840 5,840
5,760
7,795
First floor
Double CHS steel column (hdg) to be in accordance with structural
engineers design and detail.
3,060
Concrete block wall to be constructed in accordance with structural
engineers design and detail. Wall to be finished with acrylic render
system with fine sand finish and painted.
2,700
Ground floor
Concrete block wall to be constructed in accordance with structural Timber framed roof to be constructed in accordance with structural
engineers design and detail. Wall to be finished with acrylic render engineers design and detail. Roof fascia to have Hebel wall panels
system with fine sand finish and painted. finished with acrylic render system with fine sand finish and painted.
Concrete driveway to be in accordance with structural engineers
design and detail. Provide selected coloured/feature exposed
aggregate blend to manufacturers specifications. Driveway to comply Garage tilt door with Abodo Vulcan in Sioo:x (Weathered), bandsawn
with AS2890.1. Driveway to connect to existing crossover in cladding installed in accordance with manufacturers specifications.
accordance with local authority regulations. Driveway grades to be in
accordance with AS2890.1.
Eastern Elevation
E 1:100
/Users/benthornton/Documents/Cadfiles/2503 - Palazzesi - 9 George/Archicad/
15052025/2503.pln
sbt designs pty ltd t/a
Skale Building Design project Duplex lot no. 8 DA02 Development application issue 16/5/2025
project number
Mobile: 0412 025 657
for Ross Palazzesi plan no. RP72243 DA01 Development application issue 25/3/2025
2503
skale skale.com.au
TP02 Planning issue 16/3/2025
9 George Street drawn BT
TP01 Planning issue 12/3/2025
drawing number
[email protected]
building design A.C.N. 123 976 296 QBCC: 1143 609 at Noosaville scale (A3) 1:100 Rev Details Date 09 DA02 © Skale Building Design
Page 10
♻ play your part - print on recycled paper
5m 4 3 2 1
Timber framed walls to be constructed in accordance with structural
engineers design and detail. Walls to have Hebel wall panels finished Timber/steel framed roof to be in accordance with structural
with acrylic render system with fine sand finish and painted. engineers design and detail. Provide COLORBOND® steel
folded standing seam roof with fall to COLORBOND® steel
COLORBOND® steel Custom Orb oof sheeting to be fixed in folded eave gutter in accordance with hydraulic engineers
accordance with manufacturers specifications. design and detail.
STRATCO 200mm Edge gutters in COLORBOND® steel to be
Timber/steel framed roof to be in accordance with structural engineers fixed in accordance with manufacturers specifications. 180 x
design and detail. Provide COLORBOND® steel folded standing seam 30mm h3 treated primed timber fascia. Gutters to have 10mm
roof with fall to COLORBOND® steel folded eave gutter in accordance 9,445
5.0° spacers to fascia to provide overflow point.
with hydraulic engineers design and detail. 8,920 8,920
8,500
Ceiling Anodised aluminium framed screen with 25 x 25mm
Hinoki Knotwood aluminium battens to each side of
Fabriacted anodised aluminium 50 x 10mm [email protected] cts. with 70 x 10mm top rail to provide
2,740
balustrade in accordance with ABCB Housing Timber framed walls to be constructed in accordance
o/a building height above ngl
Provisions Standard 2022 : 11.3. Balustrade to be a with structural engineers design and detail. Walls to
min. 1000mm high above finished floor level. have Hebel wall panels finished with acrylic render
5,840 5,840 5,840 system with fine sand finish and painted.
5,760
7,795
First floor
4,450 4,450
3,060
3,650
2,700
Ground floor
1,650 Concrete block wall to be in
accordance with structural
Knotwood Hinoki aluminium battens to form fence/gate. Battens to be
engineers design and detail.
100 x 25mm sections (125mm max. spacing typical) to have
Provide Crackenback stone facing
concealed fixings in accordance with manufacturers specifications.
by Eco outdoor.
Panels to be self-supported with 12mm threaded rods & 20mm
anodised aluminium spacer set down 300mm from top of battens. Abodo Vulcan in Sioo:x (Weathered), bandsawn cladding installed in
accordance with manufacturers specifications.
Double CHS steel column (hdg) to be in accordance with structural
engineers design and detail.
Southern Elevation
S 1:100
/Users/benthornton/Documents/Cadfiles/2503 - Palazzesi - 9 George/Archicad/
15052025/2503.pln
sbt designs pty ltd t/a
Skale Building Design project Duplex lot no. 8 DA02 Development application issue 16/5/2025
project number
Mobile: 0412 025 657
for Ross Palazzesi plan no. RP72243 DA01 Development application issue 25/3/2025
2503
skale skale.com.au
TP02 Planning issue 16/3/2025
9 George Street drawn BT
TP01 Planning issue 12/3/2025
drawing number
[email protected]
building design A.C.N. 123 976 296 QBCC: 1143 609 at Noosaville scale (A3) 1:100 Rev Details Date 10 DA02 © Skale Building Design
Page 11
♻ play your part - print on recycled paper
5m 4 3 2 1
Abodo Vulcan in Sioo:x (Weathered), bandsawn cladding installed in
accordance with manufacturers specifications. Timber/steel framed roof to be in accordance with structural engineers
design and detail. Provide COLORBOND® steel folded standing seam
roof with fall to COLORBOND® steel folded eave gutter in accordance
COLORBOND® steel Custom Orb oof sheeting to be fixed in
with hydraulic engineers design and detail.
accordance with manufacturers specifications.
STRATCO 200mm Edge gutters in COLORBOND® steel to be fixed in
accordance with manufacturers specifications. 180 x 30mm h3 treated
9,445 9,445 primed timber fascia. Gutters to have 10mm spacers to fascia to
5.0° provide overflow point.
8,920 8,920
8,500
Ceiling
Fabriacted anodised aluminium 50 x 10mm bars @ Timber framed walls to be constructed in accordance with structural
100mm cts. with 70 x 10mm top rail to provide engineers design and detail. Walls to have Hebel wall panels finished
with acrylic render system with fine sand finish and painted.
2,740
balustrade in accordance with ABCB Housing
Provisions Standard 2022 : 11.3. Balustrade to be a
min. 1000mm high above finished floor level.
5,840 5,840
5,760
First floor
Double CHS steel column (hdg) to be in accordance with structural
4,450 4,450 engineers design and detail.
3,060
Concrete block wall to be constructed in accordance with structural
engineers design and detail. Wall to be finished with acrylic render
system with fine sand finish and painted.
2,700
Ground floor
1,650 1,650
Western Elevation
W 1:100
/Users/benthornton/Documents/Cadfiles/2503 - Palazzesi - 9 George/Archicad/
15052025/2503.pln
sbt designs pty ltd t/a
Skale Building Design project Duplex lot no. 8 DA02 Development application issue 16/5/2025
project number
Mobile: 0412 025 657
for Ross Palazzesi plan no. RP72243 DA01 Development application issue 25/3/2025
2503
skale skale.com.au
TP02 Planning issue 16/3/2025
9 George Street drawn BT
TP01 Planning issue 12/3/2025
drawing number
[email protected]
building design A.C.N. 123 976 296 QBCC: 1143 609 at Noosaville scale (A3) 1:100 Rev Details Date 11 DA02 © Skale Building Design
Page 12
♻ play your part - print on recycled paper
5m 4 3 2 1
Timber framed walls to be constructed in accordance with structural
engineers design and detail. Walls to have Hebel wall panels finished Tiger Neo N-type JKM440N-54HL4R - 440 Watt PV panels to
with acrylic render system with fine sand finish and painted. be installed on 316 s/s clamps. System to be installed in
accordance with specialist solar electricians' design and detail.
COLORBOND® steel Custom Orb oof sheeting to be fixed in
System to be connected to battery storage/grid connection.
accordance with manufacturers specifications.
STRATCO 200mm Edge gutters in COLORBOND® steel to be
Timber/steel framed roof to be in accordance with structural engineers fixed in accordance with manufacturers specifications. 180 x
design and detail. Provide COLORBOND® steel folded standing seam 30mm h3 treated primed timber fascia. Gutters to have 10mm
roof with fall to COLORBOND® steel folded eave gutter in accordance 9,445
spacers to fascia to provide overflow point.
with hydraulic engineers design and detail. 8,920 8,920
8,500
Ceiling Fabriacted anodised aluminium 50 x 10mm bars @
Abodo Vulcan in Sioo:x (Weathered), bandsawn 100mm cts. with 70 x 10mm top rail to provide
cladding installed in accordance with manufacturers balustrade in accordance with ABCB Housing
2,740
specifications. Provisions Standard 2022 : 11.3. Balustrade to be a
min. 1000mm high above finished floor level.
5,840 5,760 5,840
5,760
First floor
Concrete block wall to be in accordance with structural engineers 4,450 4,450
design and detail. Provide Crackenback stone facing by Eco outdoor.
3,060
3,450
2,700 2,700
Ground floor
Concrete block wall to be
constructed in accordance with
structural engineers design and
detail. Wall to be finished with
acrylic render system with fine
sand finish and painted.
Abodo Vulcan in Sioo:x (Weathered), bandsawn cladding installed in
accordance with manufacturers specifications.
Northern Elevation
N 1:100
/Users/benthornton/Documents/Cadfiles/2503 - Palazzesi - 9 George/Archicad/
15052025/2503.pln
sbt designs pty ltd t/a
Skale Building Design project Duplex lot no. 8 DA02 Development application issue 16/5/2025
project number
Mobile: 0412 025 657
for Ross Palazzesi plan no. RP72243 DA01 Development application issue 25/3/2025
2503
skale skale.com.au
TP02 Planning issue 16/3/2025
9 George Street drawn BT
TP01 Planning issue 12/3/2025
drawing number
[email protected]
building design A.C.N. 123 976 296 QBCC: 1143 609 at Noosaville scale (A3) 1:100 Rev Details Date 12 DA02 © Skale Building Design
Page 13
♻ play your part - print on recycled paper
5m 4 3 2 1
COLORBOND® steel Custom Orb oof sheeting to be fixed in
accordance with manufacturers specifications.
Anodised aluminium framed screen with 25 x 25mm Hinoki Knotwood Tiger Neo N-type JKM440N-54HL4R - 440 Watt PV panels to
aluminium battens to each side of frame. be installed on 316 s/s clamps. System to be installed in
accordance with specialist solar electricians' design and detail.
System to be connected to battery storage/grid connection.
Timber/steel framed roof to be in accordance with structural engineers STRATCO 200mm Edge gutters in COLORBOND® steel to be
design and detail. Provide COLORBOND® steel folded standing seam fixed in accordance with manufacturers specifications. 180 x
roof with fall to COLORBOND® steel folded eave gutter in accordance 9,445 30mm h3 treated primed timber fascia. Gutters to have 10mm
with hydraulic engineers design and detail. 5.0° spacers to fascia to provide overflow point.
8,920
8,500
Ceiling
750
Knotwood Hinoki aluminium pergola roof battens. Battens to be 150 x
2,740
50mm sections (300mm typical. spacing) to have concealed fixings in Fabriacted anodised aluminium 50 x 10mm bars @
o/a building height above ngl
accordance with manufacturers specifications. 100mm cts. with 70 x 10mm top rail to provide
balustrade in accordance with ABCB Housing
Provisions Standard 2022 : 11.3. Balustrade to be a
5,840 5,760 5,840
5,760 min. 1000mm high above finished floor level.
7,795
First floor
4,450 4,450
3,060
3,450
2,800
2,700 2,700
Ground floor
1,650
Concrete driveway to be in accordance with structural engineers
design and detail. Provide selected coloured/feature exposed
aggregate blend to manufacturers specifications. Driveway to comply
with AS2890.1. Driveway to connect to existing crossover in
accordance with local authority regulations. Driveway grades to be in
accordance with AS2890.1.
Abodo Vulcan in Sioo:x (Weathered), bandsawn cladding installed in
accordance with manufacturers specifications.
Section A
A 1:100
/Users/benthornton/Documents/Cadfiles/2503 - Palazzesi - 9 George/Archicad/
15052025/2503.pln
sbt designs pty ltd t/a
Skale Building Design project Duplex lot no. 8 DA02 Development application issue 16/5/2025
project number
Mobile: 0412 025 657
for Ross Palazzesi plan no. RP72243 DA01 Development application issue 25/3/2025
2503
skale skale.com.au
TP02 Planning issue 16/3/2025
9 George Street drawn BT
TP01 Planning issue 12/3/2025
drawing number
[email protected]
building design A.C.N. 123 976 296 QBCC: 1143 609 at Noosaville scale (A3) 1:100 Rev Details Date 13 DA02 © Skale Building Design
Page 14
♻ play your part - print on recycled paper
5m 4 3 2 1
Timber/steel framed roof to be in accordance with structural engineers
design and detail. Provide COLORBOND® steel folded standing seam
roof with fall to COLORBOND® steel folded eave gutter in accordance
with hydraulic engineers design and detail. Tiger Neo N-type JKM440N-54HL4R - 440 Watt PV panels to
be installed on 316 s/s clamps. System to be installed in
accordance with specialist solar electricians' design and detail.
COLORBOND® steel Custom Orb oof sheeting to be fixed in System to be connected to battery storage/grid connection.
accordance with manufacturers specifications.
STRATCO 200mm Edge gutters in COLORBOND® steel to be
fixed in accordance with manufacturers specifications. 180 x
2,013 9,445 2,013 30mm h3 treated primed timber fascia. Gutters to have 10mm
5.0° spacers to fascia to provide overflow point.
8,920 8,920
8,500
Ceiling
Timber framed walls to be constructed in accordance with Knotwood Hinoki aluminium pergola roof battens.
structural engineers design and detail. Walls to have Hebel Battens to be 150 x 50mm sections (300mm typical.
o/a building height above ngl
wall panels finished with acrylic render system with fine spacing) to have concealed fixings in accordance with
sand finish and painted. 1,513 1,513 manufacturers specifications.
5,840 5,760 5,840
5,760
7,795
First floor
Double CHS steel column (hdg) to be in accordance
with structural engineers design and detail.
4,450 4,450
2,700 2,700
Ground floor
1,650 1,650
Section B
B 1:100
/Users/benthornton/Documents/Cadfiles/2503 - Palazzesi - 9 George/Archicad/
15052025/2503.pln
sbt designs pty ltd t/a
Skale Building Design project Duplex lot no. 8 DA02 Development application issue 16/5/2025
project number
Mobile: 0412 025 657
for Ross Palazzesi plan no. RP72243 DA01 Development application issue 25/3/2025
2503
skale skale.com.au
TP02 Planning issue 16/3/2025
9 George Street drawn BT
TP01 Planning issue 12/3/2025
drawing number
[email protected]
building design A.C.N. 123 976 296 QBCC: 1143 609 at Noosaville scale (A3) 1:100 Rev Details Date 14 DA02 © Skale Building Design
Page 15
♻ play your part - print on recycled paper
28.777m, 89° 58' 0.00"
Site Cover
Area m2
Site Cover 262.06
up
Site Cover (planning scheme req's)
Site area 666.49m2
Max Site cover 40% 266.60m2
Site Cover
A: 262.06 m2
Site Cover (actual)
Site area 666.49m2
GF site cover 39.32% 262.06m2
22.943m, 178° 33' 0.00"
22.964m, 177° 8' 44.08"
up
Site Cover : First floor 29.340m, 89° 58' 0.00"
1:200
28.777m, 89° 58' 0.00"
up
22.964m, 177° 8' 44.08"
22.943m, 178° 33' 0.00"
up
Site Cover : Ground floor 29.340m, 89° 58' 0.00"
1:200
/Users/benthornton/Documents/Cadfiles/2503 - Palazzesi - 9 George/Archicad/
15052025/2503.pln
sbt designs pty ltd t/a
Skale Building Design project Duplex lot no. 8 DA02 Development application issue 16/5/2025
project number
Mobile: 0412 025 657
for Ross Palazzesi plan no. RP72243 DA01 Development application issue 25/3/2025
2503
skale skale.com.au
TP02 Planning issue 16/3/2025
9 George Street drawn BT
TP01 Planning issue 12/3/2025
drawing number
[email protected]
building design A.C.N. 123 976 296 QBCC: 1143 609 at Noosaville scale (A3) 1:200, 1:1 Rev Details Date 15 DA02 © Skale Building Design
Page 16
♻ play your part - print on recycled paper
28.777m, 89° 58' 0.00"
Floor Area - GFA
Area m2
Living : FF 137.82
up
Living : GF 128.16
265.98 m²
GFA (planning scheme req's)
Site area 666.49m2 Living : FF
Max GFA : 0.4 : 1 266.60m2 A: 137.82 m2
GFA (actual)
Site area 666.49m2
Total GFA 265.98m2
22.943m, 178° 33' 0.00"
22.964m, 177° 8' 44.08"
up
GFA : First floor 29.340m, 89° 58' 0.00"
1:200
28.777m, 89° 58' 0.00"
up
Living : GF
A: 64.08 m2
22.964m, 177° 8' 44.08"
22.943m, 178° 33' 0.00"
Living : GF
A: 64.08 m2
up
GFA : Ground floor 29.340m, 89° 58' 0.00"
1:200
/Users/benthornton/Documents/Cadfiles/2503 - Palazzesi - 9 George/Archicad/
15052025/2503.pln
sbt designs pty ltd t/a
Skale Building Design project Duplex lot no. 8 DA02 Development application issue 16/5/2025
project number
Mobile: 0412 025 657
for Ross Palazzesi plan no. RP72243 DA01 Development application issue 25/3/2025
2503
skale skale.com.au
TP02 Planning issue 16/3/2025
9 George Street drawn BT
TP01 Planning issue 12/3/2025
drawing number
[email protected]
building design A.C.N. 123 976 296 QBCC: 1143 609 at Noosaville scale (A3) 1:200, 1:1 Rev Details Date 16 DA02 © Skale Building Design
Page 17
♻ play your part - print on recycled paper
Landscape Area
Area m2
Landscape : Soft 160.27
Landscape : HARD 154.69
314.96 m²
Landscape area (planning scheme req's)
Site area 666.49m2
Min landscape 40% 266.60m2 A: 0.28 m2
2
A: 0.28 m2A: 0.28 m
A: 0.28 m2 A: 0.28 m2
28.777m, 89° 58' 0.00"
A: 0.28 m2
A: 38.72 m2
Landscape area (actual)
Site area 666.49m2 A: 44.38 m2
A: 4.61 m2 A: 4.00 m2
Landscape 47.25% 314.96m2 A: 12.90 m 2
up
A: 12.04 m 2
A: 0.23 m2
A: 0.28 m2
Min soft landscape req. 159.96m2
Soft landscape provided 160.27m2 A: 16.91 m2
A: 1.28 m2 A: 3.38 m2
A: 1.15 m2
A: 26.72 m2 A: 1.51 m2
A: 1.51 m2
2
A:2 3.38 m
A: 1.28 m
22.964m, 177° 8' 44.08"
22.943m, 178° 33' 0.00"
A: 46.24 m2
A: 16.52 m2
A: 0.26 m2
up A: 0.28 m2
A: 12.90 m2 A: 12.04 m2
A: 4.61 m 2 A: 4.00 m2
A: 0.28 m2
A: 40.47 m2
A: 0.28 m2
29.340m, 89° 58' 0.00"
A: 0.28 m2
A: 0.28 m2
A: 0.28 m2 A: 0.28 m2
Landscape area
1:200
/Users/benthornton/Documents/Cadfiles/2503 - Palazzesi - 9 George/Archicad/
15052025/2503.pln
sbt designs pty ltd t/a
Skale Building Design project Duplex lot no. 8 DA02 Development application issue 16/5/2025
project number
Mobile: 0412 025 657
for Ross Palazzesi plan no. RP72243 DA01 Development application issue 25/3/2025
2503
skale skale.com.au
TP02 Planning issue 16/3/2025
9 George Street drawn BT
TP01 Planning issue 12/3/2025
drawing number
[email protected]
building design A.C.N. 123 976 296 QBCC: 1143 609 at Noosaville scale (A3) 1:200, 1:1 Rev Details Date 17 DA02 © Skale Building Design
Page 18
♻ play your part - print on recycled paper
28.777m, 89° 58' 0.00"
Floor Area - General
Area m2
U1 : Entry Terrace 5.88
A: 9.06 m2 up
U1 : Living GF 117.00
U1 : Outdoor terrace 12.90
U1 : Terrace FF 9.06
A: 77.08 m2
U1 : Terrace FF 77.12
U2 : Entry Terrace 5.88
U2 : Living GF 117.00
U2 : Outdoor terrace 12.90
U2 : Terrace FF 9.06
22.943m, 178° 33' 0.00"
22.964m, 177° 8' 44.08"
U2 : Terrace FF 77.08
443.88 m² A: 77.12 m2
A: 9.06 m2 up
Floor area : First floor 29.340m, 89° 58' 0.00"
1:200
28.777m, 89° 58' 0.00"
up
A: 5.88 m2
A: 12.90 m2
A: 117.00 m2
A: 117.00 m2
22.964m, 177° 8' 44.08"
22.943m, 178° 33' 0.00"
A: 12.90 m2
up
A: 5.88 m2
Floor area : Ground floor 29.340m, 89° 58' 0.00"
1:200
/Users/benthornton/Documents/Cadfiles/2503 - Palazzesi - 9 George/Archicad/
15052025/2503.pln
sbt designs pty ltd t/a
Skale Building Design project Duplex lot no. 8 DA02 Development application issue 16/5/2025
project number
Mobile: 0412 025 657
for Ross Palazzesi plan no. RP72243 DA01 Development application issue 25/3/2025
2503
skale skale.com.au
TP02 Planning issue 16/3/2025
9 George Street drawn BT
TP01 Planning issue 12/3/2025
drawing number
[email protected]
building design A.C.N. 123 976 296 QBCC: 1143 609 at Noosaville scale (A3) 1:200, 1:1 Rev Details Date 18 DA02 © Skale Building Design
Page 19
♻ play your part - print on recycled paper
t2 t2 t2
28.777m, 89° 58' 0.00"
t4
t4
up
t1
t1
t3
t1
t1
t3
22.964m, 177° 8' 44.08"
22.943m, 178° 33' 0.00"
t1
t4
up
t2
t2
29.340m, 89° 58' 0.00"
t2 t2 t4
Landscape - Trees
1:100
/Users/benthornton/Documents/Cadfiles/2503 - Palazzesi - 9 George/Archicad/
15052025/2503.pln
sbt designs pty ltd t/a
Skale Building Design project Duplex lot no. 8 DA02 Development application issue 16/5/2025
project number
Mobile: 0412 025 657
for Ross Palazzesi plan no. RP72243 DA01 Development application issue 25/3/2025
2503
skale skale.com.au
TP02 Planning issue 16/3/2025
9 George Street drawn BT drawing number
[email protected]
building design A.C.N. 123 976 296 QBCC: 1143 609 at Noosaville scale (A3) 1:100 Rev Details Date 19 DA02 © Skale Building Design
Page 20
♻ play your part - print on recycled paper
3x gc2 3x s4 2x s6
cv1 28.777m, 89° 58' 0.00"
cv1
tf1
s1
tf1
gc1
6x s3
9x s4
up
s5 Corten steel garden edging
tf2
11x s3
2x s4
tf2
5x s3 Foothpath 1.8m wide
tf2 4x s4
gc1
2x s6
33x s2
cv1 cv1 3x s4
cv1
Typical garden beds to have
cv1 selected premium mulch
cv1
cv1 Corten steel garden edging
33x s2
s5
17x s4
2x s6
22.964m, 177° 8' 44.08"
22.943m, 178° 33' 0.00"
tf2
9x s4
5x s3 tf2
2x s6
11x s3
3x gc2 s1
tf2
up tf1
gc1 4x s3
cv1
cv1
tf1
29.340m, 89° 58' 0.00"
3x s4 s1
Landscape - Ground
1:100
/Users/benthornton/Documents/Cadfiles/2503 - Palazzesi - 9 George/Archicad/
15052025/2503.pln
sbt designs pty ltd t/a
Skale Building Design project Duplex lot no. 8 DA02 Development application issue 16/5/2025
project number
Mobile: 0412 025 657
for Ross Palazzesi plan no. RP72243 DA01 Development application issue 25/3/2025
2503
skale skale.com.au
TP02 Planning issue 16/3/2025
9 George Street drawn BT drawing number
[email protected]
building design A.C.N. 123 976 296 QBCC: 1143 609 at Noosaville scale (A3) 1:100 Rev Details Date 20 DA02 © Skale Building Design
Page 21
♻ play your part - print on recycled paper
t1 t2 t3 t4
Livistona Australis : Cabbage Palm Acronychia Imperforata : Fraser Melaleuca quinquenervia : Banksia Integrifolia : Coastal
Qty : 5 Island Apple Paperbark Tea Tree Banksia
Size : Advanced stock 2-3m trunk Qty : 18 Qty : 2 Qty : 4
Size : 45L Size : 100L Size : 100L
s1 s2 s3 s4 s5 s6
Xanthorrhoea Latifolia Alpinia Caerulea : Native Ginger Restio Tetraphyllus : Foxtails Austromyrtus Dulcis : Midyim Banksia Robur : Swamp Banksia Banksia Spinulosa : Golden
Qty : 3 Qty : 42 Qty : 42 Qty : 50 Qty : 4 Candlesticks
Size : Advanced stock 1m trunk Size : 200mm Size : 200mm Size : 200mm Size : 200mm Qty : 8
Size : 200mm
gc1 gc2 tf1 tf2 cv1
Zoysia tenuifolia : No mow grass Ficus Pumila : Climbing Fig
Dichondra repens - kidneyweed Myoporum parvifolium : Creeping Kingspride soft leaf buffalo Qty : 44m2 Qty : 18
Qty : 14 (around steppers) Boobialla Qty : 47m2 Size : 100mm
Size : 140mm Qty : 6
Size : 140mm
/Users/benthornton/Documents/Cadfiles/2503 - Palazzesi - 9 George/Archicad/
15052025/2503.pln
sbt designs pty ltd t/a
Skale Building Design project Duplex lot no. 8 DA02 Development application issue 16/5/2025
project number
Mobile: 0412 025 657
for Ross Palazzesi plan no. RP72243 DA01 Development application issue 25/3/2025
2503
skale skale.com.au
building design
[email protected]
A.C.N. 123 976 296 QBCC: 1143 609 at
9 George Street
Noosaville
drawn
scale (A3)
BT
Rev Details Date
drawing number
21 DA02 © Skale Building Design
Page 22
♻ play your part - print on recycled paper
Shrub planting detail
Tree planting detail
/Users/benthornton/Documents/Cadfiles/2503 - Palazzesi - 9 George/Archicad/
15052025/2503.pln
sbt designs pty ltd t/a
Skale Building Design project Duplex lot no. 8 DA02 Development application issue 16/5/2025
project number
Mobile: 0412 025 657
for Ross Palazzesi plan no. RP72243 DA01 Development application issue 25/3/2025
2503
skale skale.com.au
TP02 Planning issue 16/3/2025
9 George Street drawn BT drawing number
[email protected]
building design A.C.N. 123 976 296 QBCC: 1143 609 at Noosaville scale (A3) Rev Details Date 22 DA02 © Skale Building Design
Used in these records
proposal plans.pdfRelated documentApplication case desk ↗
About this file
- File size
- 10.7 MB (very large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.