Original source · versioned page text
Approved Plan - Landscape Specification prepared by URBIS - OPW24/0110
STANDARDS
• AS1397 Formability & Structural Grades of
Steel:
- Posts & Rails 0.8mm / Infill Sheets 0.35mm
Base Metal Thickness (BMT)
• AS2728
Coated Mass & Paint Film Thickness
COLORBOND® BREEZEWAY PANELS
2400mm wide Breezeway Panel consists of:
3 x Overlapped Sheets (835mm Wide)
2 x CS Channel Posts
3 x 2400mm CS Rails
BREEZEWAY SLAT SETUP TOP RAIL POST SETUP 3 of 65 x 16 x 2400mm Slats (Cut on site)
2 of Pre-Slotted 50 x 50 x 250mm Breezeway
Posts with 14mm Slat Spacings
3180mm wide Breezeway Panel consists of:
4 x Overlapped Sheets (835mm Wide)
2 x CS Channel Posts
3 x 3180mm CS Rails
3 of 65 x 16 x 3600mm Slats (Cut on site)
2 of Pre-Slotted 50 x 50 x 250mm Breezeway
Posts with 14mm Slat Spacings
COLORBOND® BREEZEWAY GATES
Single Gates are 930mm Wide:
CHANNEL
POST 1 x Infill Sheets;
2 x Breezeway Gate Stile;
3 x 830mm CS Rail;
3 of 65 x 16 x 820mm Slats
Double Gates are 1720mm Wide per Leaf:
IN-FILL 2 x Infill Sheets;
SHEET 2 x Breezeway Gate Stile;
3 x 1620mm CS Rail;
3 of 65 x 16 x 1610mm Slats
Available in 22 Colorbond® Steel Fencing
colours, guaranteed to meet AS2728.
IN-FILL SET-UP
RAIL
BOTTOM RAIL & POST SET-UP TITLE: COLOURSMART BREEZEWAY
UNASSEMBLED CONFIGURATION
CONTACT: [email protected]
oxworks.com.au 1300 336 237
Preview the original
The page text is free to read. Previews and downloads of original files need an account.
Log in to previewSearchable page text hides email addresses. Original files are unchanged and may show email addresses.