Approved Plan - Landscape Specification prepared by URBIS - OPW24/0110

        HANDI-MATE ™ HM6 HINGED DOOR SHED INSTALLATION GUIDE



 TOOLS REQUIRED
   Rivet Gun             Power Drill          PH2 Phillips Head Bit   3/16 Hex Head Bit       Adjustable Spanner   3.5mm Bit (Supplied)
                                              (Supplied)              (Supplied)                                   12mm Bit
                                                                                                                   10mm Masonry Bit




   Gloves                Safety Glasses       Step Ladder             2 x Trestles            Permanent Marker     Tape Measure




HANDI-MATE™ DIMENSIONS
                               2.91
                              2.91                                                    1.47
                                                                                     1.47




 2.00
2.00




                                  2.85
                                2.85                                                   1.45
                                                                                     1.45




HANDI-MATE™ SHED WINDOWS
 Stratco Handi-Mate Shed Windows are available as an optional add-on. For HM6 size Handi-Mates, the Window can be
 installed to the front or rear wall. Handi-Mate Windows should be installed during the Handi-Mate Shed assembly.
 Refer to the “Window Installation” section at the end of this document if installing a Stratco Window, or visit a Stratco store for
 more information.