Appendix K - Traffic Engineering Report · MCU21/0146

Driveways Table 9.4.1.3 Criteria for assessment (part)


Performance outcomes                            Acceptable Outcomes                           Comments

PO1                                             AO1.1                                         Complies with Performance/Acceptable Outcome
Vehicular access does not adversely impact      Vehicular access is located and designed in   Refer to Section 6.0 of the TTM report.
on safety, capacity and operations of the       accordance with the current Australian
existing or planned road network, cycleways     Standards for Parking Facilities.
or pedestrian pathway systems




                                                AO1.2                                         Complies with Performance/Acceptable Outcome
                                                Only one footpath crossing is provided.       Refer to Section 6.0 and Appendix A of TTM report

                                                Editor’s Note— Justification for additional
                                                driveways may need to be supported by a
                                                detailed Traffic Study.



                                                AO1.3                                         Complies with Performance/Acceptable Outcome
                                                Driveways, have a maximum grade in            Refer to Section 6.0 of TTM report.
                                                accordance with Council’s standard
                                                requirements.




PO2                                             AO2.1                                           Complies with Performance/Acceptable Outcome
Driveways and crossovers                        Design and construction of driveways,           Refer to Section 6.0 of TTM report.
are suitable and safe for their intended use;   including across the footpath, is in accordance
and match Council infrastructure.               with Council Standard Drawings as
                                                appropriate for the particular type of
                                                development as annotated on the drawings.