Council archive · source document
Part 4e of 37 Appendix 2 - Urban Planning Report and Landscape - MCU12/0208
SCC CORRESPONDENCE rac oacacnve] IIIT B0657330 THIS IS THE NEXT PART OF A MULTIPLE PART RECORD Part Of 2] Sa Application number: (\C0\>. |OD.O¥
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalFull text of the other 6 pages
Page 2
Architectural guidelines [OCR of page images] a e an re
Page 3
OVERVIEW
In developing the Noosa on Weyba Master Plan, emphasis
was placed on maximum utilization of the natural assets, the
waterfront location and adjacency to the Noosa National
Paark.
Particular emphasis was placed on creating a community
that preserves these areas, access and views to these natural
assets.
The Master Plan identifies a desired land use layout which
identifies a number of Precincts. The character vision for
Noosa on Weyba was inspired by the architecture of warm
climates, particularly a relaxed and informal grandeur of light
colours, shutters and large overhangs and a sense of polite
rambling.
These general architectural design guideliens are intended
to encourage the design of homes that reflect this lifestyle,
particularly the informality, openness and individuality
appropriate to a truly Australian beachside locailty.
| URBAN DESIGN REPORT 91
Page 4
Introduction General Architectural Design • Provision for cross ventilation to all internal spaces; Buildings must focus activity on and overlook streets and
public places to create safe, active streets and parks.
principles • Heat reflective lightweight insulated walls avoiding heat
Windows and balconies must be effectively screened to limit
transfer to most external walls;
The built form outcomes for the Lake Weyba master plan will inappropriate views of adjoining properties.
support the overall ‘vision’ to enhance and foster: • Lightweight insulated roofs with wide overhangs;
Designers and Architects must prepare their designs in Proposals should not be designed to rely on adjacent
1) Environmentally responsible and responsive built form accordance with the following overall design intents. • Internal louvred or perforated doors and cupboard doors; developments for amenity.
outcomes; • Undercover clothes drying;
2) A sense of community; • Landscape approach based on tall spreading trees for
1. Integration with the Landscape 4. Lifestyle and character
3) A visually appropriate, interesting and attractive place, set Successful built form integration with the surrounding shade and selected species for breeze filtering, rather than Noosa on Weyba is located adjacent to expansive water
within a natural landscape setting; landscape is critical to the success of this project. Precinct blocking; bodies, environmental conservation zones and the Noosa
Plans accompanying this document indicate where buildings • Rainwater reuse can either be used for landscaping National Park. The future residential community will embrace
4) A legible urban environment, at both the pedestrian and
are envisaged and where buildings are generally not irrigation, flushing of toilets. the recreational amenity of the area with interconnected
vehicle scale;
envisaged for each precinct. Housing design objectives will bush walking trails, potential water sports and more active
5) A human-scaled neighbourhood; and include: open space areas planned to be included within the master
3. Building Siting and Orientation plan area.
6) The integration of a range of different uses into a low • Working with the existing landform and vegetation;
intensity urban village. Building siting and orientation within the Noosa on Weyba The planned network of open spaces and interconnecitons
• Understanding and designing for the affects of the master plan area will be influenced by a combination to surrounding areas will encourage a vibrant community
More detailed, ‘Noosa on Weyba - Residential Design particular local climate; of specific development code requirements and by the who will place a high value on the enhanced facilities and
Guidelines’ are intended to be developed for the master
• Ensuring appropriate development scale, building particular natural features of each precinct, in particular amenity the master plan will provide. It is envisaged that
plan area which will require that all designs for new
materials and setbacks near to National Park and identified landform (contours), existing trees/ vegetation, soil types and the style of development to be created will encourage a
development within the estate are endorsed and approved
open space areas; views. Access to all dwellings within the precincts is by a contemporary approach to the traditional needs of our
by an ‘Architectural Review Committee’ prior to either;
hierarchy of vehicular and pedestrian systems. outdoor lifestyle.
• A realistic water management strategy;
• submission to Sunshine Coast Regional Council for further
The dwellings should be designed generally for the best
Development Approval/s; or • Minimal ground disturbance during construction;
north/ south orientation for good quality natural light and to
• to a Private Building Certifier for Building Works approval. • The colour and materials for surfaces are intended to avoid the harsh glare of lower east and afternoon western
incorporate site responsive materials, zincalume/buff/grey sun.
The following General Architectural design principles outline
colours for external concrete or concrete masonry and metal
the fundamental design elements to be considered when
cladding, but with the addition of a considered use of natural
planning and designing new dwellings within Noosa on
materials (rocks and timber) to enrich detail;
Weyba.
2. Sub-Tropical Design
In all aspects of the design, particular attention should be
paid to the sub-tropical climate with a specific emphasis
on facilitating efficient natural ventilation. It is important to
remember that subtropical climates include warm summers
and cool winters. Design principles include:
• A mix of lightweight and solid building forms for good cross
ventilation in summer and passive heating in winter;
• Orientation for maximum breeze access and avoidance of
east and west sun;
• Significant sun-shading and weather protection systems to
all external openings, including provision for open windows
and doors during heavy rain which is highly relevant to the
Sunshine Coast locality;
Image (1) Example of siting and design responses to individual climatic conditions
92 Urban Design Report
P:\NORT0001_Lake Weyba\B_Documentation\B1_Production\B4_Reports\Preliminary approval - Urban Design report
Page 5
Architectural guidelines
Built Form - Guidelines 3. Roof design
It is envisaged that buildings will generally have broad
overhangs, however there is a preference for a rich and
varied roofscape throughout the precincts which in
1. Siting and building orientation
particular evokes a response to the sub tropical climate of
In order to comply with the requirements of energy efficiency
the Sunshine Coast region.
and responsible design practices, all dwellings should be
positioned and orientated to maximize the benefits of each The desire for individual ‘identity’ within an overall precinct
site’s natural elements within the building zone. character of low rise buildings intimates an encouragement
for varied roof forms, for example incorporating not only
Image 1 indicates the climatic conditions and how effective
pitched roofs but also combined with vaulted or almost flat
building orientation and design can lead to a more efficient
roofs.
and liveable home.
Flues, stacks, exhaust fans or the like that penetrate roofs,
View corridors from existing dwellings should be respected by
should preferably be grouped in an orderly manner.
considerate design and siting of a new dwelling.
Image (2) Indicates highly permeable internal and Buildings should be designed to avoid glare from other
Orientation for maximum breeze access and avoidance of
external spaces buildings and to avoid the creation of glare to other
east and west sun;
buildings.
An astute appreciation of the benefits of a seamless
integration between internal and external spaces
2. BuiLt form and masssing
incorporating elements of the external environment into
Height -
4. Materials and Finishes
a ‘day to day’ way of life. This is typically characterised In general materials and finishes shall be contemporary and
Dwellings may be two or three storeys (in defined areas) in
by lighter colours (less heat retention), shaded walls, large will be easy to maintain.
height. Building heights have been established across the
openings, shutters and preferably elevated above the
site to protect views and to ensure building mass does not The criteria for external colours shall be to provide finishes
ground.
visually dominate the landscape setting of the area. complimentary with the notion of a “Total Community”
The construction is preferably timber although light coloured character. An overall appearance of unity in tone is desired
To minimise the visual impact of development from Lake
walls in masonry are acceptable. rather than a mix of clashing high contrasting colours.
Weyba, all dwellings will be set back a minimum of 60m from
The intent of a style is not to create a sameness, rather a the lake edge. Development will be contained to 2-storey for In general colours should be light and/or earthy colours with
harmony that strengthens the sense of community and low density domestic dwellings however any 3-storey medium complimentary accents used with discretion.
relates to those forms and images that are timeless and density development will be set back to sit at or behind the
It is encouraged that external walls of a building shall
familiar, whilst enhancing the property investment and its ridge line of the Precinct, which is approximately 250m back
be finished with contemporary materials such as Timber
future value. from the lake edge, as to minimise visual impact from Lake
weatherboards or plywood with a painted or stained finish.
Weyba and any properties external to the project.
5. Innovative Integrated Design Plain or painted brickwork is allowable. Similarly, masonry
The Lake Weyba master plan has been prepared to achieve Setbacks - Image (3) Indicates use of contemporary materials and
finished in a rendered and painted textured finish/ bagged
a high quality of development, using sustainable techniques Building setbacks have been determined to ensure that the
and painted finish is also encouraged. finishes
to create a place with diverse buildings which are suited relationship of dwellings to streets are appropriate for the
to the area’s unique National Park environmental setting, Weyba locality and intended land use. In general, setbacks
topographical and climatic influences. will ensure that building frontages are not dominated by
garages and ensure that viewlines and overlooking of public
Overall perception areas is achieved.
• Building elevations must be different from, though related Side and rear setbacks will allow for appropriate light, privacy
to, the others and be varied in form and detail; and ventilation between dwellings.
• Larger integrated sites must be developed as a ‘collection’ Facade articulation -
of adjacent and different buildings rather than as a single Facades will incorporate a combination of materials and
stand alone visually-integrated complex. finishes and will ensure that large expanses of unarticulated
• Buildings must be different in appearance from their walls and surfaces are avoided.
immediate neighbours, with use of different materials, details
and colours.
| URBAN DESIGN REPORT 93
Page 6
5. Architectural Treatments of methods including vertical privacy screens between intrusive from the thoroughfare or adjoining lot.
Windows balconies and stairs, design of balconies, balustrades,
All clothes lines shall not be visible from any thoroughfare.
sunhoods and screen fences.
External fenestration to the buildings should be designed in Wall mounted clothes lines shall be mounted at a lower level
consideration of privacy between dwellings. Generally sill than the surrounding wall or fence.
heights can be as low to the floor as possible, but respect Ancillary Structures Driveways
standard desk/table height to enable maximum penetration
of natural light interiors of the buildings. Solar hot water collector panels, antenna’s, air conditioning The approved finishes for driveways can contain;
units and any other ancillary structures should be designed to
Windows on the western and eastern facades should be be inconspicuous and an integral part of the dwelling and Masonry pavers
provided only in a considered manner with appropriate sun landscape design. They must not be visible from the road or Coloured concrete - exposed aggregate finish
shading. overlooking properties. The final approval will be given by Coloured concrete - broom finish
Window systems selection should consider the ability to divert the ARC. Sleepers or timber boards
breezes, allow for good cross and thermal ventilation and Hot water storage tanks must be concealed within the roof or Paving tiles - non-slip if glazed
allow to remain open during rainfall without letting in water. elsewhere within the dwelling where possible.
Plant and Equipment will not be permitted on the roof of any
Sun Shading/Weather Protection/Screens building unless screened from view.
Sun shading, screening and weather protection should
be provided to all external façade elements including Visibility
all external windows, doorways, entrances and porches Solar hot water collector panels, antenna’s, air conditioning
appropriate to the orientation and use. The design and units and any other ancillary structures should be designed to
detailing of all sun shading/weather protection devices, be inconspicuous and an integral part of the dwelling and
whether by slab projections, overhangs, fins, blades, pre- landscape design. They must not be visible from the road or
fabricated hoods, louvre systems or the like should be well overlooking properties. The final approval will be given by
considered and detailed and responsive to proper climatic the ARC.
analysis and low building maintenance requirements.
Hot water storage tanks must be concealed within the roof or
Sun shading and screening should preferably be finely elsewhere within the dwelling.
detailed where attached to the building or a projection from
the main building form, or a deeply modulated recess where
integrated with the building form. Plant and Equipment
Plant and Equipment will not be permitted on the roof of
Fencing any building. The noise level from plant and equipment
measured at the common fence must not be more than 65
Fencing is an important feature of the site and will include a decibels; and 5 decibels above the background noise level.
mix of ‘Fauna Friendly’ fencing for residential areas adjacent
to the ‘Open Space conservation zone’.
In particular, the control of pets such as dogs will need to Outdoor structures
comply with the Qld Government - Koala Safety Fencing Outdoor structures including pergolas, gazebos, storage
guidelines where a duty of care requires owners to sheds, caravan ‘carports’ and shade structures will be
implement and maintain this important type of fencing. allowed if the structure is designed and constructed
Acoustic & Visual amenity between dwellings in materials in such a manner as to compliment the
architecture of the dwelling.
Acoustic and visual privacy should be thoroughly addressed
in the design. Storage sheds should be located towards the rear of the
lot and in such a way that they cannot be seen from any
Walls enclosing dwellings should provide maximum standards thoroughfare.
of acoustic privacy between residences. Visual privacy
can be established to a reasonable level through a variety Recreational and play equipment are not to be visibly
94 Urban Design Report
P:\NORT0001_Lake Weyba\B_Documentation\B1_Production\B4_Reports\Preliminary approval - Urban Design report
Page 7
Used in these records
Part 4e of 37 Appendix 2 - Urban Planning Report and Landscape - MCU12/0208Related documentApplication case desk ↗
About this file
- File size
- 2.5 MB (large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take up to a minute.