Landscape Specification

CONTENTS



7.          TREE REMOVAL

7.1.        GENERAL SPECIFICATION
Refer to the Tree Protection Plan for numbers and locations of trees to be removed. Confirm with the Builder
that this item has not been already included in the Demolition Contractor's scope.


7.2.        TREE REMOVAL WORKS
 Tree Removal - Removal Works

 Height / Depth - Remove trees to 300mm (max.) above ground.
 Stump Grinding - Remove / grind all stumps to 300mm below ground level. Do not fill the hole to allow for
 planting soil placement later. Clean-up and remove debris.
 Wood Chip / Mulch - Mulch/chip trees on site to less than 75mm size pieces and spread as mulch (100mm
 deep) under other site trees as directed by Urbis or remove from site (whichever is cheaper) or place in the
 designated on-site mulch stockpile location. Remove from site and dispose of any diseased plant material,
 weed species or material harmful to plant growth if used as mulch. No logs or debris are to be left on site.




URBIS
URB-SPC-LAN-P0025138 - IFC.DOCX                                                                         PAGE   27