Landscape Specification

CONTENTS


13.         FENCES

13.1.       GENERAL SPECIFICATIONS
Handrails and Balustrades to be compliant with AS1428

All steelwork to be hot dip galvanised and powder coated as specified in this specification. Each connection
between aluminium and steel must be fully isolated with neoprene washer, plates and sleeves or similar

Sample
Install a minimum 2.5m long sample area of each different balustrade, handrail and fence type showing
materials, surface pattern, colour, finish and joints for approval by the Landscape Architect. If acceptable,
this sample should be retained as a quality benchmark and shall form part of the finished works.

Shop drawings for all nonstandard items need to be provided.


13.2.       FENCE TYPES

 FE01: Fence Type 01 – Steel Post and Rail

  Refer to detail 01-907-DT
  As per Noosa Council Standard Detail (Institute of Public Works Engineering Australia): GS-044 (Type 2)




   FE02: Fence Type 02 – Chain Mesh Fence
   Refer to detail 02-907-DT

   As per Noosa Council Standard Detail (Institute of Public Works Engineering Australia): GS-044 (Type 1-B)

   FE03: Fence Type 03 – Solid Colour Bond Fence – On Wall

   Product – Oxworks Standard Colorbond Steel Fencing – CS2418-CNF or similar Oxworks
   Supplier- Oxworks
   Description – Colorbond Standard Panel
   Profile – Sawtooth
   Colour – Monument
   Panel Colour - Monument
   Dimensions – 2400mm x 1800mm
   Notes – Attached to retaining wall as per manufacturers recommendation
   Refer to detail 01-908-DT

   FE03: Fence Type 03 – Solid Colour Bond Fence – On Ground

   Product – Oxworks Standard Colorbond Steel Fencing – CS2418-CNF or similar Oxworks
   Supplier- Oxworks
   Description – Colorbond Standard Panel
   Profile – Sawtooth
   Colour – Monument
   Panel Colour - Monument
   Dimensions – 2400mm x 1800mm



URBIS
URB-SPC-LAN-P0025138 - IFC.DOCX                                                                          PAGE   43