Original source · versioned page text
Response to Information Request Report (rec. 17.02.26) MCU25/0092 & OPW25/0143
3. Confirm how ground level has been determined i.e., ground level is the
level of the surface of the land on the day the first plan of survey was
registered or as determined by a registered cadastral surveyor.
4. Detail the buildings maximum height with Reduced Level (RLs).
Max Watterson Surveyors has determined ground level based on the adjoining ground
levels. This plan forms part of the engineering drawings and the finished height of the
building relative to this level
5. Provide revised landscape plans prepared by a suitably qualified
landscape architect in accordance with the requirements of the PSP2 –
Landscaping, and that incorporate the following:
a. A layout that includes additional landscape vegetation in front of
the boundary walls. The garden is required to incorporate
additional trees and tall shrubs to assist in the screening of the
built form of the fence and development when viewed from Martin
Street and Avocet Parade.
b. Additional screening vegetation with vertical scale to be provide
either side of the driveway, to buffer the built form when viewed
from Avocet Parade. Ensure planting includes appropriate height
screening plants (minimum 4-5 metres in height at maturity).
6. In accordance with AO2.1 of the Sustainable Building Code provide a
minimum 3,000 litres of rainwater storage is provided per dwelling and
reused for non-potable purposes and incorporated into a stormwater
management plan.
Detailed Landscaping plans are provided as Sheets 400-00 to 400-04 which includes
landscaping in accordance with Planning Scheme Policy for coastal species. The 3kLitre
water storage tanks are also provided for and shown under the building adjoining the pool
and will be reused by each unit for landscaping purposes. Detailed plans and connections
are required for the plumbing approvals.
Page 2 of 3
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the original