2019-12-10 Planning & Environment Committee Agenda

PLANNING & ENVIRONMENT COMMITTEE MEETING AGENDA                                10 DECEMBER 2019


The pump, at 3.6m wide, 1.2m deep and approximately 2.1m in height, is located to the rear of
the property within a screened 2.2m high enclosure. The fence forming the rear and western
portion of the enclosure is an existing 2.8m block fence. The pump requires a hardstand area to
comply with fire requirements. The pump is not anticipated to have any adverse impacts on
amenity from the street frontage, however due to proximity to the rear boundary, it is
recommended the pump be painted in subdued tones. Advice from the applicant stated:
      The pump housing is not required to be painted red, it can be painted out. Signage will be
      required to be painted in a contrasting colour and easily distinguishable
Therefore, the following additional condition is recommended:
Fire Pump
46.   The diesel fire pump housing is to be of a muted tone, with signage of a contrasting colour
      and easily distinguishable.
The change is considered necessary and will improve the safety of the residents’ onsite and is
therefore recommended to be supported.
Meter and Booster Assembly in North Western Corner of the Site
A meter assembly and booster assembly are proposed in the north western corner of the lot,
along the street frontage.




                      Figure 6: Proposed Booster Assembly and Meter Assembly




                   Figure 7: Proposed Booster Assembly and Meter Assembly Render



                                                                                    Page 69 of 84