Skip to the record
The only place to find full transcripts.

Council archive · source document

Attachment 16- Amended Stormwater Management Plan MCU12/0208

of 66

Check the original when the exact wording matters.

Plans and drawings: the text below has words only, no drawings.

Log in to see the plans as drawn
 

 

saw " TECHNICAL SPECIFICATION
ESEcosol

The RSF 100 Solid Pollutant Filter
WASTEWATER FILTRATION SYSTEMS

 

 

 

9.0 Cleaning an RSF 100 Solid Pollutant Filter

The RSF 100 Solid Pollutant Filter can be cleaned manually or by vacuum using street-sweeping vehicles. The steps
to be followed for each method are similar and are as follows:

* Place appropriate signage, and any necessary traffic
control measures, around the work area and ensure safe
access to the unit

 

* Open and secure the pit access cover or grate

* (Manual method) - lift the internal filtration bag holding the
captured pollutants from the pit (lifting handles are
attached to the removable liner to avoid contact with the
pollutants)

* (Vacuum method) - insert snorkel from suction vehicle and
remove the pollutants from the capture basket

Place the captured material into a receptacle and cover it
ready for transportation to an approved waste disposal
facility

 

 

 

* (Manual method) - prior to reinstalling the liner ensure that
no obstructions exist in the bottom of the gully pit. Remove
obstructions, if any, and carefully re-install the liner into the
aluminium slots

Ensure that the by-pass flap(s) is functioning properly and
make sure that the liner is firmly fitted and not obstructing
the by-pass flap(s)

 

¢ Secure the pit access cover or grate and remove alll
equipment and signage

Ensure any affected areas are restored to their original
condition

 

Street-cleaning equipment can be used to clean
. i the RSF 100 quickly and efficiently with no manual
disposal facility handling of pollutants

Dispose of all captured pollutants at an approved waste

Ecosol has a very competitive cleaning service. After each clean we provide a full report detailing the volume
and type of pollutants removed. We believe that it is in your best interests for Ecosol staff to clean and maintain
the unit, not only because we are specialists, but also because proper monitoring and maintenance enhances
the unit life significantly. Should you use another company to clean the unit, or undertake this work yourself, we
request that it be conducted according to Ecosol’s specifications. Otherwise, you may invalidate your warranty,
as damage caused by inappropriate cleaning procedures is not covered.

The cleaning frequency, and the cost, depend heavily on the surrounding environment, the unit’s proximity to a
waste facility, the number of units, their location, and the type of pollution collected. The advantages of using
Ecosol to clean and maintain your unit are:

* regular inspections of your unit;

* comprehensive cleaning service with the removal and disposal of all captured pollutants;
* a detailed report provided on completion of each clean;

* trained and experienced staff; and

* remedial work completed, if required.

Your Ecosol representative can provide you with the necessary information to clean your RSF 100. More details are available in

Ecosol’s RSF 100 Operation and Maintenance Manual
Page 16
NATURAL ECOLOGICAL SOLUTIONS

 

Used in these records

About this file

File size
10.0 MB (large file)
File type
PDF

No other editions are linked here.

Original file

Log in to download the original file

Attachment 16- Amended Stormwater Management Plan MCU12_0208.pdf · 10.0 MB (large file)

The download may take up to a minute.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.