Original source · versioned page text
Appendix E - Code Assessment
AO9.3
Buildings and structures meet the following minimum
setbacks to boundaries other than road frontages and
rear boundaries:
(a) 1.5 metre setback up to 4.5 metres height;
(b) 2 metres setback between 4.5 metres and 7.5
metres height; and
(c) 2.5 metres if above 7.5 metres height.
AO9.4
Notwithstanding the provisions of AO9.2 and AO9.3, a
lesser building setback to:
(a) side and rear boundaries may apply for the
following provided they comply with the
Queensland Development Code:
(i) open carport;
(ii) swimming pool, garage/shed; and
(iii) rainwater tank, retaining walls,
screens and fences not exceeding
2 metres in height; and
(b) front boundaries may apply for the following
provided they comply with the Queensland
Development Code:
(i) swimming pool less than 1m above
ground level; or
(ii) decks or balconies less than 1m
above ground level.
AO9.5
Buildings and structures on premises with frontage to
the Noosa River system are setback not less than 10
metres from the mean high water spring as shown in
Figure AP3-15A.
Alternative provision to the QDC.
Setback to a Watercourse in the Noosa Waters AO10 Not applicable.
Estate, Noosaville For premises adjoining a watercourse within the
Noosa Waters estate no building work, filling or
PO10 excavation works occurs within 4.5 metres from the
Land adjoining the revetment wall and for a width of centre line of the top of the concrete revetment wall.
4.5 metres serves flood detention and amenity
functions, free of structures and impervious surfaces. Editor's note—refer to Figure 6.3.1.5.
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalSearchable page text hides email addresses. Original files are unchanged and may show email addresses.