Original source · versioned page text
2017-09-12 Planning & Environment Committee Agenda
The original of this document is very large (25.9 MB). Opening the original or downloading it may take a few minutes. Please be patient and don't click again. The page text is quick to read. If you are on mobile data, it is best to wait until you are on Wi-Fi.
Text sections have not been matched to the original PDF pages. Use the original document to check page numbers.
PLANNING & ENVIRONMENT COMMITTEE MEETING AGENDA 12 SEPTEMBER 2017 A 18m x 10m loading dock is also proposed in this location and the applicant suggests this area is intended to informally accommodate 4 vehicles or 2 trucks. It is further suggested that the proposed basement area will operate independently from the ground and 1st floor levels with no lift access provided linking these levels. On this basis the proposed driveway provides self- regulated and unmarked parking for this area. Discussions with Council’s Development Engineer confirms the basement driveway provides sufficient area to accommodate self-regulated parking for vehicles with passing opportunities. Given the layout and nature of the use, the proposed lined marked car parking at the site’s frontage, loading bay at ground level and self-regulated parking at basement level is an appropriate response to address the likely car parking demand associated with the use. The majority of customers will utilise the basement driveway or docking station for loading and unloading of goods intended for storage. Land Use & Works Provisions The following codes which regulate land use and design are applicable to this application: Business Uses Code Advertising Devices Code Engineering Works Code Landscaping Code The proposed development has been found to generally comply with these Codes. The pertinent issues relating to signage are discussed below: Advertising Device The application seeks an Operational Works approval for Advertising Devices for various wall signs across the three buildings over both sites (62 & 64-66 Rene Street). More specifically, approval is sought for 10 existing wall signs currently installed and operational on Building 1, two wall signs on Building 2 and three proposed wall signs to be fixed to Building 3 at 62 Rene Street. Proposal plans are provided in Attachment 2. The application proposes a total sign face area of 31.98m2 across the 3 buildings and seeks approval for a “Self Storage” wall sign fixed to each of the buildings with a sign face area of 5.9m2 in lieu of 4m2 sought under the code. Details of individual signage proposed to each building is set out below under Figures 3, 4 and 5. Figure 3 – Building One: Sign Face Area Page 13 of 168
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalVery large file: the download may take a few minutes. If you are on mobile data, it is best to wait until you are on Wi-Fi.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.