Original source · versioned page text
BR1C6.LST
From the archive CALPUFF.zip (folder CALPUFF/AMG_NewPlan/BIOR1/BR1C6), inside D21030-2_NoosaSprings_Files ODOUR MODELLING - Part RFI.zip. File date in the archive: 2018-08-21 03:06.
CALPUFF Version: 7.2.1 Level: 150618
**********************************************************************************************************************************
Clock time: 21:40:24
Date: 08-20-2018
Internal Coordinate Transformations by --- COORDLIB Version: 1.99 Level: 070921
Control File Type: CALPUFF.INP 7.0 Groups 0f,0g added; new emission scaling
Run Title:
Noosa Boutique Hotel
Bioreactor
-------------
a
The name for each CALMET domain and each CALMET.DAT file is treated
as a separate input subgroup and therefore must end with an input
group terminator.
b
Use DOMAIN1= to assign the name for the outermost CALMET domain.
Use DOMAIN2= to assign the name for the next inner CALMET domain.
Use DOMAIN3= to assign the name for the next inner CALMET domain, etc.
--------------------------------------------------------------------
| When inner domains with equal resolution (grid-cell size) |
| overlap, the data from the FIRST such domain in the list will |
| be used if all other criteria for choosing the controlling |
| grid domain are inconclusive. |
--------------------------------------------------------------------
c
Use METDAT1= to assign the file names for the outermost CALMET domain.
Use METDAT2= to assign the file names for the next inner CALMET domain.
Use METDAT3= to assign the file names for the next inner CALMET domain, etc.
d
The filenames for each domain must be provided in sequential order
-------------
Subgroup (0b) – PTEMARB.DAT files
-------------
POINT Source File Names
The following PTEMARB.DAT filenames are processed if NPTDAT>0
A total of NPTDAT lines is expected with one file name assigned per line
Each line is treated as an input group and must terminate with END
(surrounded by delimiters)
(Each file contains emissions parameters for the entire period modeled
for 1 or more sources)
Default Name Type File Name
------------ ---- ---------
none input * PTDAT= * *END*
-------------
Subgroup (0c) – BAEMARB.DAT files
-------------
BUOYANT AREA Source File Names
The following BAEMARB.DAT filenames are processed if NARDAT>0
A total of NARDAT lines is expected with one file name assigned per line
Each line is treated as an input group and must terminate with END
(surrounded by delimiters)
(Each file contains emissions parameters for the entire period modeled
for 1 or more sources)
Default Name Type File Name
------------ ---- ---------
none input * ARDAT= * *END*
-------------
Subgroup (0d) – VOLEMARB.DAT files
-------------
VOLUME Source File Names
The following VOLEMARB.DAT filenames are processed if NVOLDAT>0
A total of NVOLDAT lines is expected with one file name assigned per line
Each line is treated as an input group and must terminate with END
(surrounded by delimiters)
(Each file contains emissions parameters for the entire period modeled
for 1 or more sources)
Default Name Type File Name
------------ ---- ---------
none input * VOLDAT= * *END*
-------------
Subgroup (0e) – FLEMARB.DAT files
-------------
FLARE Source File Names
The following FLEMARB.DAT filenames are processed if NFLDAT>0
A total of NFLDAT lines is expected with one file name assigned per line
Each line is treated as an input group and must terminate with END
(surrounded by delimiters)
(Each file contains emissions parameters for the entire period modeled
for 1 or more sources)
Default Name Type File Name
------------ ---- ---------
none input * FLDAT= * *END*
-------------
Subgroup (0f) – RDEMARB.DAT files
-------------
ROAD Source File Names
The following RDEMARB.DAT filenames are processed if NRDDAT>0
A total of NRDDAT lines is expected with one file name assigned per line
Each line is treated as an input group and must terminate with END
(surrounded by delimiters)
(Each file contains emissions parameters for the entire period modeled
for 1 or more sources)
Default Name Type File Name
------------ ---- ---------
none input * RDDAT= * *END*
-------------
Subgroup (0g) – LNEMARB.DAT file
-------------
BUOYANT LINE Source File Name (not more than 1)
The following LNEMARB.DAT filename is processed if NLNDAT>0
The assignment is treated as an input group and must terminate with END
(surrounded by delimiters)
Default Name Type File Name
------------ ---- ---------
LNEMARB.DAT input * LNDAT= * *END*
--------------------------------------------------------------------------------
INPUT GROUP: 1 -- General run control parameters
--------------
Option to run all periods found
in the met. file (METRUN) Default: 0 ! METRUN = 0 !
METRUN = 0 - Run period explicitly defined below
METRUN = 1 - Run all periods in met. file
Starting date: Year (IBYR) -- No default ! IBYR = 2016 !
Month (IBMO) -- No default ! IBMO = 1 !
Day (IBDY) -- No default ! IBDY = 1 !
Starting time: Hour (IBHR) -- No default ! IBHR = 0 !
Minute (IBMIN) -- No default ! IBMIN = 0 !
Second (IBSEC) -- No default ! IBSEC = 0 !
Ending date: Year (IEYR) -- No default ! IEYR = 2017 !
Month (IEMO) -- No default ! IEMO = 1 !
Day (IEDY) -- No default ! IEDY = 1 !
Ending time: Hour (IEHR) -- No default ! IEHR = 0 !
Minute (IEMIN) -- No default ! IEMIN = 0 !
Second (IESEC) -- No default ! IESEC = 0 !
(These are only used if METRUN = 0)
Base time zone: (ABTZ) -- No default ! ABTZ= UTC+1000 !
(character*8)
The modeling domain may span multiple time zones. ABTZ defines the
base time zone used for the entire simulation. This must match the
base time zone of the meteorological data.
Examples:
Greenwich Mean Time (GMT) = UTC+0000
EST = UTC-0500
CST = UTC-0600
MST = UTC-0700
PST = UTC-0800
Los Angeles, USA = UTC-0800
New York, USA = UTC-0500
Santiago, Chile = UTC-0400
UK = UTC+0000
Western Europe = UTC+0100
Rome, Italy = UTC+0100
Cape Town, S.Africa = UTC+0200
Sydney, Australia = UTC+1000
Length of modeling time-step (seconds)
Equal to update period in the primary
meteorological data files, or an
integer fraction of it (1/2, 1/3 ...)
Must be no larger than 1 hour
(NSECDT) Default:3600 ! NSECDT = 3600 !
Units: seconds
Number of chemical species (NSPEC)
Default: 5 ! NSPEC = 1 !
Number of chemical species
to be emitted (NSE) Default: 3 ! NSE = 1 !
Flag to stop run after
SETUP phase (ITEST) Default: 2 ! ITEST = 2 !
(Used to allow checking
of the model inputs, files, etc.)
ITEST = 1 - STOPS program after SETUP phase
ITEST = 2 - Continues with execution of program
after SETUP
Restart Configuration:
Control flag (MRESTART) Default: 0 ! MRESTART = 0 !
0 = Do not read or write a restart file
1 = Read a restart file at the beginning of
the run
2 = Write a restart file during run
3 = Read a restart file at beginning of run
and write a restart file during run
Number of periods in Restart
output cycle (NRESPD) Default: 0 ! NRESPD = 0 !
0 = File written only at last period
>0 = File updated every NRESPD periods
Meteorological Data Format (METFM)
Default: 1 ! METFM = 1 !
METFM = 1 - CALMET binary file (CALMET.MET)
METFM = 2 - ISC ASCII file (ISCMET.MET)
METFM = 3 - AUSPLUME ASCII file (PLMMET.MET)
METFM = 4 - CTDM plus tower file (PROFILE.DAT) and
surface parameters file (SURFACE.DAT)
METFM = 5 - AERMET tower file (PROFILE.DAT) and
surface parameters file (SURFACE.DAT)
Meteorological Profile Data Format (MPRFFM)
(used only for METFM = 1, 2, 3)
Default: 1 ! MPRFFM = 1 !
MPRFFM = 1 - CTDM plus tower file (PROFILE.DAT)
MPRFFM = 2 - AERMET tower file (PROFILE.DAT)
Sigma-y is adjusted by the factor (AVET/PGTIME)**0.2 to either
decrease it if the averaging time selected is less than the base
averaging time, or increase it if the averaging time is greater.
The base averaging time is denoted as PGTIME due to historical
reasons as this adjustment was originally applied to the PG sigma
option. It is now applied to all dispersion options.
The factor is applied to the ambient turbulence sigma-v (m/s) and
does not alter buoyancy enhancement or far-field Heffter growth.
Averaging Time (minutes) (AVET)
Default: 60.0 ! AVET = 60. !
Base Averaging Time (minutes) (PGTIME)
Default: 60.0 ! PGTIME = 60. !
Output units for binary concentration and flux files
written in Dataset v2.2 or later formats
(IOUTU) Default: 1 ! IOUTU = 1 !
1 = mass - g/m3 (conc) or g/m2/s (dep)
2 = odour - odour_units (conc)
3 = radiation - Bq/m3 (conc) or Bq/m2/s (dep)
!END!
-------------------------------------------------
NOTICE: Starting year in control file sets the
expected century for the simulation. All
YY years are converted to YYYY years in
the range: 1966 2065
-------------------------------------------------
-------------------------------------------------------------------------------
INPUT GROUP: 2 -- Technical options
--------------
Vertical distribution used in the
near field (MGAUSS) Default: 1 ! MGAUSS = 1 !
0 = uniform
1 = Gaussian
Terrain adjustment method
(MCTADJ) Default: 3 ! MCTADJ = 3 !
0 = no adjustment
1 = ISC-type of terrain adjustment
2 = simple, CALPUFF-type of terrain
adjustment
3 = partial plume path adjustment
Subgrid-scale complex terrain
flag (MCTSG) Default: 0 ! MCTSG = 0 !
0 = not modeled
1 = modeled
Near-field puffs modeled as
elongated slugs? (MSLUG) Default: 0 ! MSLUG = 0 !
0 = no
1 = yes (slug model used)
Transitional plume rise modeled?
(MTRANS) Default: 1 ! MTRANS = 1 !
0 = no (i.e., final rise only)
1 = yes (i.e., transitional rise computed)
Stack tip downwash? (MTIP) Default: 1 ! MTIP = 1 !
0 = no (i.e., no stack tip downwash)
1 = yes (i.e., use stack tip downwash)
Method used to compute plume rise for
point sources not subject to building
downwash? (MRISE) Default: 1 ! MRISE = 1 !
1 = Briggs plume rise
2 = Numerical plume rise
Apply stack-tip downwash to FLARE sources?
(MTIP_FL) Default: 0 ! MTIP_FL = 0 !
0 = no (no stack-tip downwash)
1 = yes (apply stack-tip downwash)
Plume rise module for FLARE sources
(MRISE_FL) Default: 2 ! MRISE_FL = 2 !
1 = Briggs module
2 = Numerical rise module
Method used to simulate building
downwash? (MBDW) Default: 1 ! MBDW = 2 !
1 = ISC method
2 = PRIME method
Vertical wind shear modeled above
stack top (modified Briggs plume rise)?
(MSHEAR) Default: 0 ! MSHEAR = 0 !
0 = no (i.e., vertical wind shear not modeled)
1 = yes (i.e., vertical wind shear modeled)
Puff splitting allowed? (MSPLIT) Default: 0 ! MSPLIT = 0 !
0 = no (i.e., puffs not split)
1 = yes (i.e., puffs are split)
Chemical mechanism flag (MCHEM) Default: 1 ! MCHEM = 0 !
0 = chemical transformation not
modeled
1 = transformation rates computed
internally (MESOPUFF II scheme)
2 = user-specified transformation
rates used
3 = transformation rates computed
internally (RIVAD/ARM3 scheme)
4 = secondary organic aerosol formation
computed (MESOPUFF II scheme for OH)
5 = user-specified half-life with or
without transfer to child species
6 = transformation rates computed
internally (Updated RIVAD scheme with
ISORROPIA equilibrium)
7 = transformation rates computed
internally (Updated RIVAD scheme with
ISORROPIA equilibrium and CalTech SOA)
Aqueous phase transformation flag (MAQCHEM)
(Used only if MCHEM = 6, or 7) Default: 0 ! MAQCHEM = 0 !
0 = aqueous phase transformation
not modeled
1 = transformation rates and wet
scavenging coefficients adjusted
for in-cloud aqueous phase reactions
(adapted from RADM cloud model
implementation in CMAQ/SCICHEM)
Liquid Water Content flag (MLWC)
(Used only if MAQCHEM = 1) Default: 1 ! MLWC = 1 !
0 = water content estimated from cloud cover
and presence of precipitation
1 = gridded cloud water data read from CALMET
water content output files (filenames are
the CALMET.DAT names PLUS the extension
AUXEXT provided in Input Group 0)
Wet removal modeled ? (MWET) Default: 1 ! MWET = 0 !
0 = no
1 = yes
Dry deposition modeled ? (MDRY) Default: 1 ! MDRY = 0 !
0 = no
1 = yes
(dry deposition method specified
for each species in Input Group 3)
Gravitational settling (plume tilt)
modeled ? (MTILT) Default: 0 ! MTILT = 0 !
0 = no
1 = yes
(puff center falls at the gravitational
settling velocity for 1 particle species)
Restrictions:
- MDRY = 1
- NSPEC = 1 (must be particle species as well)
- sg = 0 GEOMETRIC STANDARD DEVIATION in Group 8 is
set to zero for a single particle diameter
Method used to compute dispersion
coefficients (MDISP) Default: 3 ! MDISP = 2 !
1 = dispersion coefficients computed from measured values
of turbulence, sigma v, sigma w
2 = dispersion coefficients from internally calculated
sigma v, sigma w using micrometeorological variables
(u*, w*, L, etc.)
3 = PG dispersion coefficients for RURAL areas (computed using
the ISCST multi-segment approximation) and MP coefficients in
urban areas
4 = same as 3 except PG coefficients computed using
the MESOPUFF II eqns.
5 = CTDM sigmas used for stable and neutral conditions.
For unstable conditions, sigmas are computed as in
MDISP = 3, described above. MDISP = 5 assumes that
measured values are read
Sigma-v/sigma-theta, sigma-w measurements used? (MTURBVW)
(Used only if MDISP = 1 or 5) Default: 3 ! MTURBVW = 3 !
1 = use sigma-v or sigma-theta measurements
from PROFILE.DAT to compute sigma-y
(valid for METFM = 1, 2, 3, 4, 5)
2 = use sigma-w measurements
from PROFILE.DAT to compute sigma-z
(valid for METFM = 1, 2, 3, 4, 5)
3 = use both sigma-(v/theta) and sigma-w
from PROFILE.DAT to compute sigma-y and sigma-z
(valid for METFM = 1, 2, 3, 4, 5)
4 = use sigma-theta measurements
from PLMMET.DAT to compute sigma-y
(valid only if METFM = 3)
Back-up method used to compute dispersion
when measured turbulence data are
missing (MDISP2) Default: 3 ! MDISP2 = 2 !
(used only if MDISP = 1 or 5)
2 = dispersion coefficients from internally calculated
sigma v, sigma w using micrometeorological variables
(u*, w*, L, etc.)
3 = PG dispersion coefficients for RURAL areas (computed using
the ISCST multi-segment approximation) and MP coefficients in
urban areas
4 = same as 3 except PG coefficients computed using
the MESOPUFF II eqns.
[DIAGNOSTIC FEATURE]
Method used for Lagrangian timescale for Sigma-y
(used only if MDISP=1,2 or MDISP2=1,2)
(MTAULY) Default: 0 ! MTAULY = 0 !
0 = Draxler default 617.284 (s)
1 = Computed as Lag. Length / (.75 q) -- after SCIPUFF
10 < Direct user input (s) -- e.g., 306.9
[DIAGNOSTIC FEATURE]
Method used for Advective-Decay timescale for Turbulence
(used only if MDISP=2 or MDISP2=2)
(MTAUADV) Default: 0 ! MTAUADV = 0 !
0 = No turbulence advection
1 = Computed (OPTION NOT IMPLEMENTED)
10 < Direct user input (s) -- e.g., 800
Method used to compute turbulence sigma-v &
sigma-w using micrometeorological variables
(Used only if MDISP = 2 or MDISP2 = 2)
(MCTURB) Default: 1 ! MCTURB = 1 !
1 = Standard CALPUFF subroutines
2 = AERMOD subroutines
PG sigma-y,z adj. for roughness? Default: 0 ! MROUGH = 0 !
(MROUGH)
0 = no
1 = yes
Partial plume penetration of Default: 1 ! MPARTL = 1 !
elevated inversion modeled for
point sources?
(MPARTL)
0 = no
1 = yes
Partial plume penetration of Default: 1 ! MPARTLBA = 1 !
elevated inversion modeled for
buoyant area sources?
(MPARTLBA)
0 = no
1 = yes
Strength of temperature inversion Default: 0 ! MTINV = 0 !
provided in PROFILE.DAT extended records?
(MTINV)
0 = no (computed from measured/default gradients)
1 = yes
PDF used for dispersion under convective conditions?
Default: 0 ! MPDF = 1 !
(MPDF)
0 = no
1 = See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalFull text of sections 2 to 4 (of 6)
Section 2
yes
Sub-Grid TIBL module used for shore line?
Default: 0 ! MSGTIBL = 0 !
(MSGTIBL)
0 = no
1 = yes
Boundary conditions (concentration) modeled?
Default: 0 ! MBCON = 0 !
(MBCON)
0 = no
1 = yes, using formatted BCON.DAT file
2 = yes, using unformatted CONC.DAT file
Note: MBCON > 0 requires that the last species modeled
be 'BCON'. Mass is placed in species BCON when
generating boundary condition puffs so that clean
air entering the modeling domain can be simulated
in the same way as polluted air. Specify zero
emission of species BCON for all regular sources.
Individual source contributions saved?
Default: 0 ! MSOURCE = 0 !
(MSOURCE)
0 = no
1 = yes
Analyses of fogging and icing impacts due to emissions from
arrays of mechanically-forced cooling towers can be performed
using CALPUFF in conjunction with a cooling tower emissions
processor (CTEMISS) and its associated postprocessors. Hourly
emissions of water vapor and temperature from each cooling tower
cell are computed for the current cell configuration and ambient
conditions by CTEMISS. CALPUFF models the dispersion of these
emissions and provides cloud information in a specialized format
for further analysis. Output to FOG.DAT is provided in either
'plume mode' or 'receptor mode' format.
Configure for FOG Model output?
Default: 0 ! MFOG = 0 !
(MFOG)
0 = no
1 = yes - report results in PLUME Mode format
2 = yes - report results in RECEPTOR Mode format
Test options specified to see if
they conform to regulatory
values? (MREG) Default: 1 ! MREG = 0 !
0 = NO checks are made
1 = Technical options must conform to USEPA
Long Range Transport (LRT) guidance
METFM 1 or 2
AVET 60. (min)
PGTIME 60. (min)
MGAUSS 1
MCTADJ 3
MTRANS 1
MTIP 1
MRISE 1
MCHEM 1 or 3 (if modeling SOx, NOx)
MWET 1
MDRY 1
MDISP 2 or 3
MPDF 0 if MDISP=3
1 if MDISP=2
MROUGH 0
MPARTL 1
MPARTLBA 0
SYTDEP 550. (m)
MHFTSZ 0
SVMIN 0.5 (m/s)
!END!
-------------------------------------------------------------------------------
INPUT GROUP: 3a, 3b -- Species list
-------------------
------------
Subgroup (3a)
------------
The following species are modeled:
! CSPEC = ODOUR ! !END!
Dry OUTPUT GROUP
SPECIES MODELED EMITTED DEPOSITED NUMBER
NAME (0=NO, 1=YES) (0=NO, 1=YES) (0=NO, (0=NONE,
(Limit: 12 1=COMPUTED-GAS 1=1st CGRUP,
Characters 2=COMPUTED-PARTICLE 2=2nd CGRUP,
in length) 3=USER-SPECIFIED) 3= etc.)
! ODOUR = 1, 1, 0, 0 !
!END!
Note: The last species in (3a) must be 'BCON' when using the
boundary condition option (MBCON > 0). Species BCON should
typically be modeled as inert (no chem transformation or
removal).
-------------
Subgroup (3b)
-------------
The following names are used for Species-Groups in which results
for certain species are combined (added) prior to output. The
CGRUP name will be used as the species name in output files.
Use this feature to model specific particle-size distributions
by treating each size-range as a separate species.
Order must be consistent with 3(a) above.
-------------------------------------------------------------------------------
INPUT GROUP: 4 -- Map Projection and Grid control parameters
--------------
Projection for all (X,Y):
-------------------------
Map projection
(PMAP) Default: UTM ! PMAP = UTM !
UTM : Universal Transverse Mercator
TTM : Tangential Transverse Mercator
LCC : Lambert Conformal Conic
PS : Polar Stereographic
EM : Equatorial Mercator
LAZA : Lambert Azimuthal Equal Area
False Easting and Northing (km) at the projection origin
(Used only if PMAP= TTM, LCC, or LAZA)
(FEAST) Default=0.0 ! FEAST = 0.000 !
(FNORTH) Default=0.0 ! FNORTH = 0.000 !
UTM zone (1 to 60)
(Used only if PMAP=UTM)
(IUTMZN) No Default ! IUTMZN = 56 !
Hemisphere for UTM projection?
(Used only if PMAP=UTM)
(UTMHEM) Default: N ! UTMHEM = S !
N : Northern hemisphere projection
S : Southern hemisphere projection
Latitude and Longitude (decimal degrees) of projection origin
(Used only if PMAP= TTM, LCC, PS, EM, or LAZA)
(RLAT0) No Default ! RLAT0 = 0N !
(RLON0) No Default ! RLON0 = 0E !
TTM : RLON0 identifies central (true N/S) meridian of projection
RLAT0 selected for convenience
LCC : RLON0 identifies central (true N/S) meridian of projection
RLAT0 selected for convenience
PS : RLON0 identifies central (grid N/S) meridian of projection
RLAT0 selected for convenience
EM : RLON0 identifies central meridian of projection
RLAT0 is REPLACED by 0.0N (Equator)
LAZA: RLON0 identifies longitude of tangent-point of mapping plane
RLAT0 identifies latitude of tangent-point of mapping plane
Matching parallel(s) of latitude (decimal degrees) for projection
(Used only if PMAP= LCC or PS)
(XLAT1) No Default ! XLAT1 = 0N !
(XLAT2) No Default ! XLAT2 = 0N !
LCC : Projection cone slices through Earth's surface at XLAT1 and XLAT2
PS : Projection plane slices through Earth at XLAT1
(XLAT2 is not used)
----------
Note: Latitudes and longitudes should be positive, and include a
letter N,S,E, or W indicating north or south latitude, and
east or west longitude. For example,
35.9 N Latitude = 35.9N
118.7 E Longitude = 118.7E
Datum-region
------------
The Datum-Region for the coordinates is identified by a character
string. Many mapping products currently available use the model of the
Earth known as the World Geodetic System 1984 (WGS-84). Other local
models may be in use, and their selection in CALMET will make its output
consistent with local mapping products. The list of Datum-Regions with
official transformation parameters is provided by the National Imagery and
Mapping Agency (NIMA).
NIMA Datum - Regions(Examples)
------------------------------------------------------------------------------
WGS-84 WGS-84 Reference Ellipsoid and Geoid, Global coverage (WGS84)
NAS-C NORTH AMERICAN 1927 Clarke 1866 Spheroid, MEAN FOR CONUS (NAD27)
NAR-C NORTH AMERICAN 1983 GRS 80 Spheroid, MEAN FOR CONUS (NAD83)
NWS-84 NWS 6370KM Radius, Sphere
ESR-S ESRI REFERENCE 6371KM Radius, Sphere
Datum-region for output coordinates
(DATUM) Default: WGS-84 ! DATUM = WGS-84 !
METEOROLOGICAL Grid (outermost if nested CALMET grids are used):
Rectangular grid defined for projection PMAP,
with X the Easting and Y the Northing coordinate
No. X grid cells (NX) No default ! NX = 94 !
No. Y grid cells (NY) No default ! NY = 94 !
No. vertical layers (NZ) No default ! NZ = 12 !
Grid spacing (DGRIDKM) No default ! DGRIDKM = 0.05 !
Units: km
Cell face heights
(ZFACE(nz+1)) No defaults
Units: m
! ZFACE = .0, 20.0, 60.0, 100.0, 150.0, 200.0, 250.0, 350.0, 500.0, 800.0,
1600.0, 2600.0, 4600.0 !
Reference Coordinates
of SOUTHWEST corner of
grid cell(1, 1):
X coordinate (XORIGKM) No default ! XORIGKM = 505.985 !
Y coordinate (YORIGKM) No default ! YORIGKM = 7075.885 !
Units: km
COMPUTATIONAL Grid:
The computational grid is identical to or a subset of the MET. grid.
The lower left (LL) corner of the computational grid is at grid point
(IBCOMP, JBCOMP) of the MET. grid. The upper right (UR) corner of the
computational grid is at grid point (IECOMP, JECOMP) of the MET. grid.
The grid spacing of the computational grid is the same as the MET. grid.
X index of LL corner (IBCOMP) No default ! IBCOMP = 1 !
(1 <= IBCOMP <= NX)
Y index of LL corner (JBCOMP) No default ! JBCOMP = 1 !
(1 <= JBCOMP <= NY)
X index of UR corner (IECOMP) No default ! IECOMP = 94 !
(1 <= IECOMP <= NX)
Y index of UR corner (JECOMP) No default ! JECOMP = 94 !
(1 <= JECOMP <= NY)
SAMPLING Grid (GRIDDED RECEPTORS):
The lower left (LL) corner of the sampling grid is at grid point
(IBSAMP, JBSAMP) of the MET. grid. The upper right (UR) corner of the
sampling grid is at grid point (IESAMP, JESAMP) of the MET. grid.
The sampling grid must be identical to or a subset of the computational
grid. It may be a nested grid inside the computational grid.
The grid spacing of the sampling grid is DGRIDKM/MESHDN.
Logical flag indicating if gridded
receptors are used (LSAMP) Default: T ! LSAMP = T !
(T=yes, F=no)
X index of LL corner (IBSAMP) No default ! IBSAMP = 1 !
(IBCOMP <= IBSAMP <= IECOMP)
Y index of LL corner (JBSAMP) No default ! JBSAMP = 1 !
(JBCOMP <= JBSAMP <= JECOMP)
X index of UR corner (IESAMP) No default ! IESAMP = 94 !
(IBCOMP <= IESAMP <= IECOMP)
Y index of UR corner (JESAMP) No default ! JESAMP = 94 !
(JBCOMP <= JESAMP <= JECOMP)
Nesting factor of the sampling
grid (MESHDN) Default: 1 ! MESHDN = 1 !
(MESHDN is an integer >= 1)
!END!
-------------------------------------------------------------------------------
INPUT GROUP: 5 -- Output Options
--------------
* *
FILE DEFAULT VALUE VALUE THIS RUN
---- ------------- --------------
Concentrations (ICON) 1 ! ICON = 1 !
Dry Fluxes (IDRY) 1 ! IDRY = 0 !
Wet Fluxes (IWET) 1 ! IWET = 0 !
2D Temperature (IT2D) 0 ! IT2D = 0 !
2D Density (IRHO) 0 ! IRHO = 0 !
Relative Humidity (IVIS) 1 ! IVIS = 0 !
(relative humidity file is
required for visibility
analysis)
Use data compression option in output file?
(LCOMPRS) Default: T ! LCOMPRS = T !
*
0 = Do not create file, 1 = create file
QA PLOT FILE OUTPUT OPTION:
Create a standard series of output files (e.g.
locations of sources, receptors, grids ...)
suitable for plotting?
(IQAPLOT) Default: 1 ! IQAPLOT = 1 !
0 = no
1 = yes
DIAGNOSTIC PUFF-TRACKING OUTPUT OPTION:
Puff locations and properties reported to
PFTRAK.DAT file for postprocessing?
(IPFTRAK) Default: 0 ! IPFTRAK = 0 !
0 = no
1 = yes, update puff output at end of each timestep
2 = yes, update puff output at end of each sampling step
DIAGNOSTIC MASS FLUX OUTPUT OPTIONS:
Mass flux across specified boundaries
for selected species reported?
(IMFLX) Default: 0 ! IMFLX = 0 !
0 = no
1 = yes (FLUXBDY.DAT and MASSFLX.DAT filenames
are specified in Input Group 0)
Mass balance for each species
reported?
(IMBAL) Default: 0 ! IMBAL = 0 !
0 = no
1 = yes (MASSBAL.DAT filename is
specified in Input Group 0)
NUMERICAL RISE OUTPUT OPTION:
Create a file with plume properties for each rise
increment, for each model timestep?
This applies to sources modeled with numerical rise
and is limited to ONE source in the run.
(INRISE) Default: 0 ! INRISE = 0 !
0 = no
1 = yes (RISE.DAT filename is
specified in Input Group 0)
LINE PRINTER OUTPUT OPTIONS:
Print concentrations (ICPRT) Default: 0 ! ICPRT = 0 !
Print dry fluxes (IDPRT) Default: 0 ! IDPRT = 0 !
Print wet fluxes (IWPRT) Default: 0 ! IWPRT = 0 !
(0 = Do not print, 1 = Print)
Concentration print interval
(ICFRQ) in timesteps Default: 1 ! ICFRQ = 1 !
Dry flux print interval
(IDFRQ) in timesteps Default: 1 ! IDFRQ = 1 !
Wet flux print interval
(IWFRQ) in timesteps Default: 1 ! IWFRQ = 1 !
Units for Line Printer Output
(IPRTU) Default: 1 ! IPRTU = 3 !
for for
Concentration Deposition
1 = g/m**3 g/m**2/s
2 = mg/m**3 mg/m**2/s
3 = ug/m**3 ug/m**2/s
4 = ng/m**3 ng/m**2/s
5 = Odour Units
6 = TBq/m**3 TBq/m**2/s TBq=terabecquerel
7 = GBq/m**3 GBq/m**2/s GBq=gigabecquerel
8 = Bq/m**3 Bq/m**2/s Bq=becquerel (disintegrations/s)
Messages tracking progress of run
written to the screen ?
(IMESG) Default: 2 ! IMESG = 2 !
0 = no
1 = yes (advection step, puff ID)
2 = yes (YYYYJJJHH, # old puffs, # emitted puffs)
SPECIES (or GROUP for combined species) LIST FOR OUTPUT OPTIONS
---- CONCENTRATIONS ---- ------ DRY FLUXES ------ ------ WET FLUXES ------ -- MASS FLUX --
SPECIES
/GROUP PRINTED? SAVED ON DISK? PRINTED? SAVED ON DISK? PRINTED? SAVED ON DISK? SAVED ON DISK?
------- ------------------------ ------------------------ ------------------------ ---------------
! ODOUR = 0, 1, 0, 0, 0, 0, 0 !
Note: Species BCON (for MBCON > 0) does not need to be saved on disk.
OPTIONS FOR PRINTING "DEBUG" QUANTITIES (much output)
Logical for debug output
(LDEBUG) Default: F ! LDEBUG = F !
First puff to track
(IPFDEB) Default: 1 ! IPFDEB = 1 !
Number of puffs to track
(NPFDEB) Default: 1 ! NPFDEB = 1 !
Met. period to start output
(NN1) Default: 1 ! NN1 = 1 !
Met. period to end output
(NN2) Default: 10 ! NN2 = 10 !
!END!
-------------------------------------------------------------------------------
INPUT GROUP: 6a, 6b, & 6c -- Subgrid scale complex terrain inputs
-------------------------
---------------
Subgroup (6a)
---------------
Number of terrain features (NHILL) Default: 0 ! NHILL = 0 !
Number of special complex terrain
receptors (NCTREC) Default: 0 ! NCTREC = 0 !
Terrain and CTSG Receptor data for
CTSG hills input in CTDM format ?
(MHILL) No Default ! MHILL = 2 !
1 = Hill and Receptor data created
by CTDM processors & read from
HILL.DAT and HILLRCT.DAT files
2 = Hill data created by OPTHILL &
input below in Subgroup (6b);
Receptor data in Subgroup (6c)
Factor to convert horizontal dimensions Default: 1.0 ! XHILL2M = 1.0 !
to meters (MHILL=1)
Factor to convert vertical dimensions Default: 1.0 ! ZHILL2M = 1.0 !
to meters (MHILL=1)
X-origin of CTDM system relative to No Default ! XCTDMKM = 0 !
CALPUFF coordinate system, in Kilometers (MHILL=1)
Y-origin of CTDM system relative to No Default ! YCTDMKM = 0 !
CALPUFF coordinate system, in Kilometers (MHILL=1)
! END !
---------------
Subgroup (6b)
---------------
1 **
HILL information
HILL XC YC THETAH ZGRID RELIEF EXPO 1 EXPO 2 SCALE 1 SCALE 2 AMAX1 AMAX2
NO. (km) (km) (deg.) (m) (m) (m) (m) (m) (m) (m) (m)
---- ---- ---- ------ ----- ------ ------ ------ ------- ------- ----- -----
---------------
Subgroup (6c)
---------------
COMPLEX TERRAIN RECEPTOR INFORMATION
XRCT YRCT ZRCT Section 3
XHH
(km) (km) (m)
------ ----- ------ ----
-------------------
1
Description of Complex Terrain Variables:
XC, YC = Coordinates of center of hill
THETAH = Orientation of major axis of hill (clockwise from
North)
ZGRID = Height of the 0 of the grid above mean sea
level
RELIEF = Height of the crest of the hill above the grid elevation
EXPO 1 = Hill-shape exponent for the major axis
EXPO 2 = Hill-shape exponent for the major axis
SCALE 1 = Horizontal length scale along the major axis
SCALE 2 = Horizontal length scale along the minor axis
AMAX = Maximum allowed axis length for the major axis
BMAX = Maximum allowed axis length for the major axis
XRCT, YRCT = Coordinates of the complex terrain receptors
ZRCT = Height of the ground (MSL) at the complex terrain
Receptor
XHH = Hill number associated with each complex terrain receptor
(NOTE: MUST BE ENTERED AS A REAL NUMBER)
**
NOTE: DATA for each hill and CTSG receptor are treated as a separate
input subgroup and therefore must end with an input group terminator.
-------------------------------------------------------------------------------
INPUT GROUP: 7 -- Chemical parameters for dry deposition of gases
--------------
SPECIES DIFFUSIVITY ALPHA STAR REACTIVITY MESOPHYLL RESISTANCE HENRY'S LAW COEFFICIENT
NAME (cm**2/s) (s/cm) (dimensionless)
------- ----------- ---------- ---------- -------------------- -----------------------
!END!
-------------------------------------------------------------------------------
INPUT GROUP: 8 -- Size parameters for dry deposition of particles
--------------
For SINGLE SPECIES, the mean and standard deviation are used to
compute a deposition velocity for NINT (see group 9) size-ranges,
and these are then averaged to obtain a mean deposition velocity.
For GROUPED SPECIES, the size distribution should be explicitly
specified (by the 'species' in the group), and the standard deviation
for each should be entered as 0. The model will then use the
deposition velocity for the stated mean diameter.
SPECIES GEOMETRIC MASS MEAN GEOMETRIC STANDARD
NAME DIAMETER DEVIATION
(microns) (microns)
------- ------------------- ------------------
!END!
-------------------------------------------------------------------------------
INPUT GROUP: 9 -- Miscellaneous dry deposition parameters
--------------
Reference cuticle resistance (s/cm)
(RCUTR) Default: 30 ! RCUTR = 30.0 !
Reference ground resistance (s/cm)
(RGR) Default: 10 ! RGR = 10.0 !
Reference pollutant reactivity
(REACTR) Default: 8 ! REACTR = 8.0 !
Number of particle-size intervals used to
evaluate effective particle deposition velocity
(NINT) Default: 9 ! NINT = 9 !
Vegetation state in unirrigated areas
(IVEG) Default: 1 ! IVEG = 1 !
IVEG=1 for active and unstressed vegetation
IVEG=2 for active and stressed vegetation
IVEG=3 for inactive vegetation
!END!
-------------------------------------------------------------------------------
INPUT GROUP: 10 -- Wet Deposition Parameters
---------------
Scavenging Coefficient -- Units: (sec)**(-1)
Pollutant Liquid Precip. Frozen Precip.
--------- -------------- --------------
!END!
-------------------------------------------------------------------------------
INPUT GROUP: 11a, 11b -- Chemistry Parameters
---------------------
---------------
Subgroup (11a)
---------------
Several parameters are needed for one or more of the chemical transformation
mechanisms. Those used for each mechanism are:
S
M B R O
A B R R R C H 4 B N
B V C N N N M K - - C O D
C M G K I I I H H I I K F V E
M K N N N T T T 2 2 S S P R C C
O O H H H E E E O O R R M A N A
Mechanism (MCHEM) Z 3 3 3 3 1 2 3 2 2 P P F C X Y
-------------------- --------------------------------------------------
0 None . . . . . . . . . . . . . . . .
1 MESOPUFF II X X . . X X X X . . . . . . . .
2 User Rates . . . . . . . . . . . . . . . .
3 RIVAD X X . . X . . . . . . . . . . .
4 SOA X X . . . . . . . . . . X X X .
5 Radioactive Decay . . . . . . . . . . . . . . . X
6 RIVAD/ISORRPIA X X X X X X . . X X X X . . . .
7 RIVAD/ISORRPIA/SOA X X X X X X . . X X X X X X . .
Ozone data input option (MOZ) Default: 1 ! MOZ = 0 !
(Used only if MCHEM = 1,3,4,6, or 7)
0 = use a monthly background ozone value
1 = read hourly ozone concentrations from
the OZONE.DAT data file
Monthly ozone concentrations in ppb (BCKO3)
(Used only if MCHEM = 1,3,4,6, or 7 and either
MOZ = 0, or
MOZ = 1 and all hourly O3 data missing)
Default: 12*80.
! BCKO3 = 40.00, 40.00, 40.00, 40.00, 40.00, 40.00, 40.00, 40.00, 40.00, 40.00, 40.00, 40.00 !
Ammonia data option (MNH3) Default: 0 ! MNH3 = 0 !
(Used only if MCHEM = 6 or 7)
0 = use monthly background ammonia values (BCKNH3) - no vertical variation
1 = read monthly background ammonia values for each layer from
the NH3Z.DAT data file
Ammonia vertical averaging option (MAVGNH3)
(Used only if MCHEM = 6 or 7, and MNH3 = 1)
0 = use NH3 at puff center height (no averaging is done)
1 = average NH3 values over vertical extent of puff
Default: 1 ! MAVGNH3 = 1 !
Monthly ammonia concentrations in ppb (BCKNH3)
(Used only if MCHEM = 1 or 3, or
if MCHEM = 6 or 7, and MNH3 = 0)
Default: 12*10.
! BCKNH3 = 10.00, 10.00, 10.00, 10.00, 10.00, 10.00, 10.00, 10.00, 10.00, 10.00, 10.00, 10.00 !
Nighttime SO2 loss rate in %/hour (RNITE1)
(Used only if MCHEM = 1, 6 or 7)
This rate is used only at night for MCHEM=1
and is added to the computed rate both day
and night for MCHEM=6,7 (heterogeneous reactions)
Default: 0.2 ! RNITE1 = .2 !
Nighttime NOx loss rate in %/hour (RNITE2)
(Used only if MCHEM = 1)
Default: 2.0 ! RNITE2 = 2.0 !
Nighttime HNO3 formation rate in %/hour (RNITE3)
(Used only if MCHEM = 1)
Default: 2.0 ! RNITE3 = 2.0 !
H2O2 data input option (MH2O2) Default: 1 ! MH2O2 = 1 !
(Used only if MCHEM = 6 or 7, and MAQCHEM = 1)
0 = use a monthly background H2O2 value
1 = read hourly H2O2 concentrations from
the H2O2.DAT data file
Monthly H2O2 concentrations in ppb (BCKH2O2)
(Used only if MQACHEM = 1 and either
MH2O2 = 0 or
MH2O2 = 1 and all hourly H2O2 data missing)
Default: 12*1.
! BCKH2O2 = 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00 !
--- Data for ISORROPIA Option
(used only if MCHEM = 6 or 7)
Minimum relative humidity used in ISORROPIA computations (RH_ISRP)
Default: 50. ! RH_ISRP = 50.0 !
Units: %
Minimum SO4 used in ISORROPIA computations (SO4_ISRP)
Default: 0.4 ! SO4_ISRP = .4 !
Units: ug/m3
--- Data for SECONDARY ORGANIC AEROSOL (SOA) Options
(used only if MCHEM = 4 or 7)
The MCHEM = 4 SOA module uses monthly values of:
Fine particulate concentration in ug/m^3 (BCKPMF)
Organic fraction of fine particulate (OFRAC)
VOC / NOX ratio (after reaction) (VCNX)
The MCHEM = 7 SOA module uses monthly values of:
Fine particulate concentration in ug/m^3 (BCKPMF)
Organic fraction of fine particulate (OFRAC)
These characterize the air mass when computing
the formation of SOA from VOC emissions.
Typical values for several distinct air mass types are:
Month 1 2 3 4 5 6 7 8 9 10 11 12
Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
Clean Continental
BCKPMF 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1.
OFRAC .15 .15 .20 .20 .20 .20 .20 .20 .20 .20 .20 .15
VCNX 50. 50. 50. 50. 50. 50. 50. 50. 50. 50. 50. 50.
Clean Marine (surface)
BCKPMF .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5
OFRAC .25 .25 .30 .30 .30 .30 .30 .30 .30 .30 .30 .25
VCNX 50. 50. 50. 50. 50. 50. 50. 50. 50. 50. 50. 50.
Urban - low biogenic (controls present)
BCKPMF 30. 30. 30. 30. 30. 30. 30. 30. 30. 30. 30. 30.
OFRAC .20 .20 .25 .25 .25 .25 .25 .25 .20 .20 .20 .20
VCNX 4. 4. 4. 4. 4. 4. 4. 4. 4. 4. 4. 4.
Urban - high biogenic (controls present)
BCKPMF 60. 60. 60. 60. 60. 60. 60. 60. 60. 60. 60. 60.
OFRAC .25 .25 .30 .30 .30 .55 .55 .55 .35 .35 .35 .25
VCNX 15. 15. 15. 15. 15. 15. 15. 15. 15. 15. 15. 15.
Regional Plume
BCKPMF 20. 20. 20. 20. 20. 20. 20. 20. 20. 20. 20. 20.
OFRAC .20 .20 .25 .35 .25 .40 .40 .40 .30 .30 .30 .20
VCNX 15. 15. 15. 15. 15. 15. 15. 15. 15. 15. 15. 15.
Urban - no controls present
BCKPMF 100. 100. 100. 100. 100. 100. 100. 100. 100. 100. 100. 100.
OFRAC .30 .30 .35 .35 .35 .55 .55 .55 .35 .35 .35 .30
VCNX 2. 2. 2. 2. 2. 2. 2. 2. 2. 2. 2. 2.
Default: Clean Continental
! BCKPMF = 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00 !
! OFRAC = 0.15, 0.15, 0.20, 0.20, 0.20, 0.20, 0.20, 0.20, 0.20, 0.20, 0.20, 0.15 !
! VCNX = 50.00, 50.00, 50.00, 50.00, 50.00, 50.00, 50.00, 50.00, 50.00, 50.00, 50.00, 50.00 !
--- End Data for SECONDARY ORGANIC AEROSOL (SOA) Options
Number of half-life decay specification blocks provided in Subgroup 11b
(Used only if MCHEM = 5)
(NDECAY) Default: 0 ! NDECAY = 0 !
!END!
--------------
Subgroup (11b)
--------------
Each species modeled may be assigned a decay half-life (sec), and the associated
mass lost may be assigned to one or more other modeled species using a mass yield
factor. This information is used only for MCHEM=5.
Provide NDECAY blocks assigning the half-life for a parent species and mass yield
factors for each child species (if any) produced by the decay.
Set HALF_LIFE=0.0 for NO decay (infinite half-life).
a b
SPECIES Half-Life Mass Yield
NAME (sec) Factor
------- --------- ----------
* SPEC1 = 3600., -1.0 * (Parent)
* SPEC2 = -1.0, 0.0 * (Child)
*END*
--------
a
Specify a half life that is greater than or equal to zero for 1 parent species
in each block, and set the yield factor for this species to -1
b
Specify a yield factor that is greater than or equal to zero for 1 or more child
species in each block, and set the half-life for each of these species to -1
NOTE: Assignments in each block are treated as a separate input
subgroup and therefore must end with an input group terminator.
If NDECAY=0, no assignments and input group terminators should appear.
-------------------------------------------------------------------------------
INPUT GROUP: 12 -- Misc. Dispersion and Computational Parameters
---------------
Horizontal size of puff (m) beyond which
time-dependent dispersion equations (Heffter)
are used to determine sigma-y and
sigma-z (SYTDEP) Default: 550. ! SYTDEP = 5.5E02 !
Switch for using Heffter equation for sigma z
as above (0 = Not use Heffter; 1 = use Heffter
(MHFTSZ) Default: 0 ! MHFTSZ = 0 !
Stability class used to determine plume
growth rates for puffs above the boundary
layer (JSUP) Default: 5 ! JSUP = 5 !
Vertical dispersion constant for stable
conditions (k1 in Eqn. 2.7-3) (CONK1) Default: 0.01 ! CONK1 = .01 !
Vertical dispersion constant for neutral/
unstable conditions (k2 in Eqn. 2.7-4)
(CONK2) Default: 0.1 ! CONK2 = .1 !
Factor for determining Transition-point from
Schulman-Scire to Huber-Snyder Building Downwash
scheme (SS used for Hs < Hb + TBD * HL)
(TBD) Default: 0.5 ! TBD = .5 !
TBD < 0 ==> always use Huber-Snyder
TBD = 1.5 ==> always use Schulman-Scire
TBD = 0.5 ==> ISC Transition-point
Range of land use categories for which
urban dispersion is assumed
(IURB1, IURB2) Default: 10 ! IURB1 = 10 !
19 ! IURB2 = 19 !
Site characterization parameters for single-point Met data files ---------
(needed for METFM = 2,3,4,5)
Land use category for modeling domain
(ILANDUIN) Default: 20 ! ILANDUIN = 20 !
Roughness length (m) for modeling domain
(Z0IN) Default: 0.25 ! Z0IN = .25 !
Leaf area index for modeling domain
(XLAIIN) Default: 3.0 ! XLAIIN = 3.0 !
Elevation above sea level (m)
(ELEVIN) Default: 0.0 ! ELEVIN = .0 !
Latitude (degrees) for met location
(XLATIN) Default: -999. ! XLATIN = -999.0 !
Longitude (degrees) for met location
(XLONIN) Default: -999. ! XLONIN = -999.0 !
Specialized information for interpreting single-point Met data files -----
Anemometer height (m) (Used only if METFM = 2,3)
(ANEMHT) Default: 10. ! ANEMHT = 10.0 !
Form of lateral turbulance data in PROFILE.DAT file
(Used only if METFM = 4,5 or MTURBVW = 1 or 3)
(ISIGMAV) Default: 1 ! ISIGMAV = 1 !
0 = read sigma-theta
1 = read sigma-v
Choice of mixing heights (Used only if METFM = 4)
(IMIXCTDM) Default: 0 ! IMIXCTDM = 0 !
0 = read PREDICTED mixing heights
1 = read OBSERVED mixing heights
Maximum length of a slug (met. grid units)
(XMXLEN) Default: 1.0 ! XMXLEN = 1.0 !
Maximum travel distance of a puff/slug (in
grid units) during one sampling step
(XSAMLEN) Default: 1.0 ! XSAMLEN = 1.0 !
Maximum Number of slugs/puffs release from
one source during one time step
(MXNEW) Default: 99 ! MXNEW = 99 !
Maximum Number of sampling steps for
one puff/slug during one time step
(MXSAM) Default: 99 ! MXSAM = 99 !
Number of iterations used when computing
the transport wind for a sampling step
that includes gradual rise (for CALMET
and PROFILE winds)
(NCOUNT) Default: 2 ! NCOUNT = 2 !
Minimum sigma y for a new puff/slug (m)
(SYMIN) Default: 1.0 ! SYMIN = 1.0 !
Minimum sigma z for a new puff/slug (m)
(SZMIN) Default: 1.0 ! SZMIN = 1.0 !
Maximum sigma z (m) allowed to avoid
numerical problem in calculating virtual
time or distance. Cap should be large
enough to have no influence on normal events.
Enter a negative cap to disable.
(SZCAP_M) Default: 5.0e06 ! SZCAP_M = 5.0E06 !
Default minimum turbulence velocities sigma-v and sigma-w
for each stability class over land and over water (m/s)
(SVMIN(12) and SWMIN(12))
---------- LAND ---------- --------- WATER ----------
Stab Class : A B C D E F A B C D E F
--- --- --- --- --- --- --- --- --- --- --- ---
Default SVMIN : .50, .50, .50, .50, .50, .50, .37, .37, .37, .37, .37, .37
Default SWMIN : .20, .12, .08, .06, .03, .016, .20, .12, .08, .06, .03, .016
! SVMIN = 0.200, 0.200, 0.200, 0.200, 0.200, 0.200, 0.200, 0.200, 0.200, 0.200, 0.200, 0.200!
! SWMIN = 0.200, 0.120, 0.080, 0.060, 0.030, 0.016, 0.200, 0.120, 0.080, 0.060, 0.030, 0.016!
Divergence criterion for dw/dz across puff
used to initiate adjustment for horizontal
convergence (1/s)
Partial adjustment starts at CDIV(1), and
full adjustment is reached at CDIV(2)
(CDIV(2)) Default: 0.0,0.0 ! CDIV = .0, .0 !
Search radius (number of cells) for nearest
land and water cells used in the subgrid
TIBL module
(NLUTIBL) Default: 4 ! NLUTIBL = 4 !
Minimum wind speed (m/s) allowed for
non-calm conditions. Also used as minimum
speed returned when using power-law
extrapolation toward surface
(WSCALM) Default: 0.5 ! WSCALM = .5 !
Maximum mixing height (m)
(XMAXZI) Default: 3000. ! XMAXZI = 3000.0 !
Minimum mixing height (m)
(XMINZI) Default: 50. ! XMINZI = 50.0 !
Temperatures (K) used for defining upper bound of
categories for emissions scale-factors
11 upper bounds (K) are entered; the 12th class has no upper limit
(TKCAT(11))
Default : 265., 270., 275., 280., 285., 290., 295., 300., 305., 310., 315. (315.+)
< < < < < < < < < < <
Temperature Class : 1 2 3 4 5 6 7 8 9 10 11 (12)
---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
! TKCAT = 265., 270., 275., 280., 285., 290., 295., 300., 305., 310., 315. !
Wind Speeds (m/s) used for defining upper bound of
categories for emissions scale-factors
5 upper bounds (m/s) are entered; the 6th class has no upper limit
(WSCAT(5)) Default :
ISC RURAL : 1.54, 3.09, 5.14, 8.23, 10.8 (10.8+)
Wind Speed Class : 1 2 3 4 5
--- --- --- --- ---
! WSCAT = 1.54, 3.09, 5.14, 8.23, 10.80 !
Default wind speed profile power-law
exponents for stabilities 1-6
(PLX0(6)) Default : ISC RURAL values
ISC RURAL : .07, .07, .10, .15, .35, .55
ISC URBAN : .15, .15, .20, .25, .30, .30
Stability Class : A B C D E F
--- --- --- --- --- ---
! PLX0 = .07, .07, .10, .15, .35, .55 !
Default potential temperature gradient
for stable classes E, F (degK/m)
(PTG0(2)) Default: 0.020, 0.035
! PTG0 = 0.020, 0.035 Section 4
!
Default plume path coefficients for
each stability class (used when option
for partial plume height terrain adjustment
is selected -- MCTADJ=3)
(PPC(6)) Stability Class : A B C D E F
Default PPC : .50, .50, .50, .50, .35, .35
--- --- --- --- --- ---
! PPC = 0.50, 0.50, 0.50, 0.50, 0.35, 0.35 !
Slug-to-puff transition criterion factor
equal to sigma-y/length of slug
(SL2PF) Default: 10. ! SL2PF = 10.0 !
Receptor-specific puff/slug properties (e.g., sigmas and height above
ground at the time when the trajectory is nearest the receptor) may be
extrapolated forward or backward in time along the current step using
the current dispersion, for receptors that lie upwind of the puff/slug
position at the start of a step, or downwind at the end of a step.
Specify the upwind/downwind extrapolation zone in sigma-y units.
Using FCLIP=1.0 clips the the upwind zone at one sigma-y at the start
of the step and the downwind zone at one sigma-y at the end of the step.
This is consistent with the sampling done in CALPUFF versions through
v6.42 prior to the introduction of the FCLIP option.
The default is No Extrapolation, FCLIP=0.0.
(FCLIP) Default: 0.0 ! FCLIP = 0.0 !
Puff-splitting control variables ------------------------
VERTICAL SPLIT
--------------
Number of puffs that result every time a puff
is split - nsplit=2 means that 1 puff splits
into 2
(NSPLIT) Default: 3 ! NSPLIT = 3 !
Time(s) of a day when split puffs are eligible to
be split once again; this is typically set once
per day, around sunset before nocturnal shear develops.
24 values: 0 is midnight (00:00) and 23 is 11 PM (23:00)
0=do not re-split 1=eligible for re-split
(IRESPLIT(24)) Default: Hour 17 = 1
! IRESPLIT = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0 !
Split is allowed only if last hour's mixing
height (m) exceeds a minimum value
(ZISPLIT) Default: 100. ! ZISPLIT = 100.0 !
Split is allowed only if ratio of last hour's
mixing ht to the maximum mixing ht experienced
by the puff is less than a maximum value (this
postpones a split until a nocturnal layer develops)
(ROLDMAX) Default: 0.25 ! ROLDMAX = 0.25 !
HORIZONTAL SPLIT
----------------
Number of puffs that result every time a puff
is split - nsplith=5 means that 1 puff splits
into 5
(NSPLITH) Default: 5 ! NSPLITH = 5 !
Minimum sigma-y (Grid Cells Units) of puff
before it may be split
(SYSPLITH) Default: 1.0 ! SYSPLITH = 1.0 !
Minimum puff elongation rate (SYSPLITH/hr) due to
wind shear, before it may be split
(SHSPLITH) Default: 2. ! SHSPLITH = 2.0 !
Minimum concentration (g/m^3) of each
species in puff before it may be split
Enter array of NSPEC values; if a single value is
entered, it will be used for ALL species
(CNSPLITH) Default: 1.0E-07 ! CNSPLITH = 1.0E-07 !
Integration control variables ------------------------
Fractional convergence criterion for numerical SLUG
sampling integration
(EPSSLUG) Default: 1.0e-04 ! EPSSLUG = 1.0E-04 !
Fractional convergence criterion for numerical AREA
source integration
(EPSAREA) Default: 1.0e-06 ! EPSAREA = 1.0E-06 !
Trajectory step-length (m) used for numerical rise
integration
(DSRISE) Default: 1.0 ! DSRISE = 1.0 !
Boundary Condition (BC) Puff control variables ------------------------
Minimum height (m) to which BC puffs are mixed as they are emitted
(MBCON=2 ONLY). Actual height is reset to the current mixing height
at the release point if greater than this minimum.
(HTMINBC) Default: 500. ! HTMINBC = 500.0 !
Search radius (km) about a receptor for sampling nearest BC puff.
BC puffs are typically emitted with a spacing of one grid cell
length, so the search radius should be greater than DGRIDKM.
(RSAMPBC) Default: 10. ! RSAMPBC = 10.0 !
Near-Surface depletion adjustment to concentration profile used when
sampling BC puffs?
(MDEPBC) Default: 1 ! MDEPBC = 1 !
0 = Concentration is NOT adjusted for depletion
1 = Adjust Concentration for depletion
!END!
-------------------------------------------------------------------------------
INPUT GROUPS: 13a, 13b, 13c, 13d -- Point source parameters
--------------------------------
---------------
Subgroup (13a)
---------------
Number of point sources with
parameters provided below (NPT1) No default ! NPT1 = 0 !
Units used for point source
emissions below (IPTU) Default: 1 ! IPTU = 1 !
1 = g/s
2 = kg/hr
3 = lb/hr
4 = tons/yr
5 = Odour Unit * m**3/s (vol. flux of odour compound)
6 = Odour Unit * m**3/min
7 = metric tons/yr
8 = Bq/s (Bq = becquerel = disintegrations/s)
9 = GBq/yr
Number of source-species
combinations with variable
emissions scaling factors
provided below in (13d) (NSPT1) Default: 0 ! NSPT1 = 0 !
Number of point sources with
variable emission parameters
provided in external file (NPT2) No default ! NPT2 = 0 !
(If NPT2 > 0, these point
source emissions are read from
the file: PTEMARB.DAT)
!END!
---------------
Subgroup (13b)
---------------
a
POINT SOURCE: CONSTANT DATA
-----------------------------
b c
Source X Y Stack Base Stack Exit Exit Bldg. Emission
No. Coordinate Coordinate Height Elevation Diameter Vel. Temp. Dwash Rates
(km) (km) (m) (m) (m) (m/s) (deg. K)
------ ---------- ---------- ------ ------ -------- ----- -------- ----- --------
--------
a
Data for each source are treated as a separate input subgroup
and therefore must end with an input group terminator.
SRCNAM is a 12-character name for a source
(No default)
X is an array holding the source data listed by the column headings
(No default)
SIGYZI is an array holding the initial sigma-y and sigma-z (m)
(Default: 0.,0.)
FMFAC is a vertical momentum flux factor (0. or 1.0) used to represent
the effect of rain-caps or other physical configurations that
reduce momentum rise associated with the actual exit velocity.
(Default: 1.0 -- full momentum used)
ZPLTFM is the platform height (m) for sources influenced by an isolated
structure that has a significant open area between the surface
and the bulk of the structure, such as an offshore oil platform.
The Base Elevation is that of the surface (ground or ocean),
and the Stack Height is the release height above the Base (not
above the platform). Building heights entered in Subgroup 13c
must be those of the buildings on the platform, measured from
the platform deck. ZPLTFM is used only with MBDW=1 (ISC
downwash method) for sources with building downwash.
(Default: 0.0)
b
0. = No building downwash modeled
1. = Downwash modeled for buildings resting on the surface
2. = Downwash modeled for buildings raised above the surface (ZPLTFM > 0.)
NOTE: must be entered as a REAL number (i.e., with decimal point)
c
An emission rate must be entered for every pollutant modeled.
Enter emission rate of zero for secondary pollutants that are
modeled, but not emitted. Units are specified by IPTU
(e.g. 1 for g/s).
---------------
Subgroup (13c)
---------------
BUILDING DIMENSION DATA FOR SOURCES SUBJECT TO DOWNWASH
-------------------------------------------------------
Source a
No. Effective building height, width, length and X/Y offset (in meters)
every 10 degrees. LENGTH, XBADJ, and YBADJ are only needed for
MBDW=2 (PRIME downwash option)
------ --------------------------------------------------------------------
--------
a
Building height, width, length, and X/Y offset from the source are treated
as a separate input subgroup for each source and therefore must end with
an input group terminator. The X/Y offset is the position, relative to the
stack, of the center of the upwind face of the projected building, with the
x-axis pointing along the flow direction.
---------------
Subgroup (13d)
---------------
a
POINT SOURCE: EMISSION-RATE SCALING FACTORS
-------------------------------------------
Use this subgroup to identify temporal variations in the emission
rates given in 13b. Factors assigned multiply the rates in 13b.
Skip sources here that have constant emissions. For more elaborate
variation in source parameters, use PTEMARB.DAT and NPT2 > 0.
Sets of emission-rate scale factors are defined in Input Group 19, and
are referenced by the FACTORNAME. Provide NSPT1 lines that identify the
emission-rate scale factor table for each source-species combination that
uses the scaling option. Note that a scale-factor table can be used with
more than one source-species combination so a FACTORNAME can be repeated.
Source- Source Species Scale-factor table
Species Name b Name c Name d
No. (SRCNAM) (CSPEC) (FACTORNAME)
------ ------------ ------------ ---------------------
--------
a
Assignment for each source-specie is treated as a separate input subgroup
and therefore must end with an input group terminator.
b
Source name must match one of the SRCNAM names defined in Input Group 13b
c
Species name must match one of the CSPEC names of emitted species defined in Input Group 3
d
Scale-factor name must match one of the FACTORNAME names defined in Input Group 19
-------------------------------------------------------------------------------
INPUT GROUPS: 14a, 14b, 14c, 14d -- Area source parameters
--------------------------------
---------------
Subgroup (14a)
---------------
Number of polygon area sources with
parameters specified below (NAR1) No default ! NAR1 = 1 !
Units used for area source
emissions below (IARU) Default: 1 ! IARU = 1 !
1 = g/m**2/s
2 = kg/m**2/hr
3 = lb/m**2/hr
4 = tons/m**2/yr
5 = Odour Unit * m/s (vol. flux/m**2 of odour compound)
6 = Odour Unit * m/min
7 = metric tons/m**2/yr
8 = Bq/m**2/s (Bq = becquerel = disintegrations/s)
9 = GBq/m**2/yr
Number of source-species
combinations with variable
emissions scaling factors
provided below in (14d) (NSAR1) Default: 0 ! NSAR1 = 0 !
Number of buoyant polygon area sources
with variable location and emission
parameters (NAR2) No default ! NAR2 = 0 !
(If NAR2 > 0, ALL parameter data for
these sources are read from the file: BAEMARB.DAT)
!END!
---------------
Subgroup (14b)
---------------
a
AREA SOURCE: CONSTANT DATA
----------------------------
b
Source Effect. Base Initial Emission
No. Height Elevation Sigma z Rates
(m) (m) (m)
------- ------ ------ -------- ---------
1! SRCNAM = BR1C6 !
1! X = 1.0, 25.4, 1.0, 1.27 ! !END!
--------
a
Data for each source are treated as a separate input subgroup
and therefore must end with an input group terminator.
b
An emission rate must be entered for every pollutant modeled.
Enter emission rate of zero for secondary pollutants that are
modeled, but not emitted. Units are specified by IARU
(e.g. 1 for g/m**2/s).
---------------
Subgroup (14c)
---------------
COORDINATES (km) FOR EACH VERTEX(4) OF EACH POLYGON
--------------------------------------------------------
Source a
No. Ordered list of X followed by list of Y, grouped by source
------ ------------------------------------------------------------
1! SRCNAM = BR1C6 !
1! XVERT = 508.718, 508.718, 508.726, 508.727 !
1! YVERT = 7078.441, 7078.448, 7078.448, 7078.442 ! !END!
--------
a
Data for each source are treated as a separate input subgroup
and therefore must end with an input group terminator.
---------------
Subgroup (14d)
---------------
a
AREA SOURCE: EMISSION-RATE SCALING FACTORS
-------------------------------------------
Use this subgroup to identify temporal variations in the emission
rates given in 14b. Factors assigned multiply the rates in 14b.
Skip sources here that have constant emissions. For more elaborate
variation in source parameters, use BAEMARB.DAT and NAR2 > 0.
Sets of emission-rate scale factors are defined in Input Group 19, and
are referenced by the FACTORNAME. Provide NSAR1 lines that identify the
emission-rate scale factor table for each source-species combination that
uses the scaling option. Note that a scale-factor table can be used with
more than one source-species combination so a FACTORNAME can be repeated.
Source- Source Species Scale-factor table
Species Name b Name c Name d
No. (SRCNAM) (CSPEC) (FACTORNAME)
------ ------------ ------------ ---------------------
--------
a
Assignment for each source-specie is treated as a separate input subgroup
and therefore must end with an input group terminator.
b
Source name must match one of the SRCNAM names defined in Input Group 14b
c
Species name must match one of the CSPEC names of emitted species defined in Input Group 3
d
Scale-factor name must match one of the FACTORNAME names defined in Input Group 19
-------------------------------------------------------------------------------
INPUT GROUPS: 15a, 15b, 15c -- Line source parameters
---------------------------
---------------
Subgroup (15a)
---------------
Number of buoyant line sources
with variable location and emission
parameters (NLN2) No default ! NLN2 = 0 !
(If NLN2 > 0, ALL parameter data for
these sources are read from the file: LNEMARB.DAT)
Number of buoyant line sources (NLINES) No default ! NLINES = 0 !
Units used for line source
emissions below (ILNU) Default: 1 ! ILNU = 1 !
1 = g/s
2 = kg/hr
3 = lb/hr
4 = tons/yr
5 = Odour Unit * m**3/s (vol. flux of odour compound)
6 = Odour Unit * m**3/min
7 = metric tons/yr
8 = Bq/s (Bq = becquerel = disintegrations/s)
9 = GBq/yr
Number of source-species
combinations with variable
emissions scaling factors
provided below in (15c) (NSLN1) Default: 0 ! NSLN1 = 0 !
Maximum number of segments used to model
each line (MXNSEG) Default: 7 ! MXNSEG = 7 !
The following variables are required only if NLINES > 0. They are
used in the buoyant line source plume rise calculations.
Number of distances at which Default: 6 ! NLRISE = 6 !
transitional rise is computed
Average building length (XL) No default ! XL = .0 !
(in meters)
Average building height (HBL) No default ! HBL = .0 !
(in meters)
Average building width (WBL) No default ! WBL = .0 !
(in meters)
Average line source width (WML) No default ! WML = .0 !
(in meters)
Average separation between buildings (DXL) No default ! DXL = .0 !
(in meters)
Average buoyancy parameter (FPRIMEL) No default ! FPRIMEL = .0 !
(in m**4/s**3)
!END!
---------------
Subgroup (15b)
---------------
BUOYANT LINE SOURCE: CONSTANT DATA
----------------------------------
a
Source Beg. X Beg. Y End. X End. Y Release Base Emission
No. Coordinate Coordinate Coordinate Coordinate Height Elevation Rates
(km) (km) (km) (km) (m) (m)
------ ---------- ---------- --------- ---------- ------- --------- ---------
--------
a
Data for each source are treated as a separate input subgroup
and therefore must end with an input group terminator.
b
An emission rate must be entered for every pollutant modeled.
Enter emission rate of zero for secondary pollutants that are
modeled, but not emitted. Units are specified by ILNTU
(e.g. 1 for g/s).
---------------
Subgroup (15c)
---------------
a
BUOYANT LINE SOURCE: EMISSION-RATE SCALING FACTORS
--------------------------------------------------
Use this subgroup to identify temporal variations in the emission
rates given in 15b. Factors assigned multiply the rates in 15b.
Skip sources here that have constant emissions. For more elaborate
variation in source parameters, use LNEMARB.DAT and NLN2 > The text continues on section 5.