Council archive · source document
Approved Plan - 51901.4863.018 (As Published) · 51901.4863.08
Plans and drawings: the text below has words only, no drawings.
FINAL DETAILS TO SHOPFITTER/CABINET MAKERS SPECIFICATIONS Council Annotation:
03
ALL CABINETRY TO HAVE ADJUSTABLE SHELVING
A 1 B No outdoor dining areas or
FINAL EQUIPEMENT SIZES (FRIDGES, BINS, DISHWASHERS,
CASHDRAWER, SINK, JUG RINERS ETC) TO BE CONFIRM BY CLIENTS
PRIOR TO CABINETRY CONSTRUCTION 5,305
Advertising Devices are apart of
02
ALLOW FOR SERVICES DUCT BEHIND/THROUGH CABINETRY FOR this approval.
PLUMBING AND POWER SERVICES SLIM PROFILE ALUMINIUM AWNING WINDOW WITH TINTED+FLUTED GLASS -
POWDERCOATED PERIMETER FRAMING DUAL COLOUR FRAMING - SILL FRAME TO BE CUSTOM Advertising Devices are regulated
AROUND OPENINGS (PC-T COLOUR) TO TERRACOTTA COLOUR - WINDOW / GLASS FRAME in accordance with the
CAP ENDS OF SK1N TILE CLADDING SURROUND DARK COLOUR - DETAILS BY OTHERS
Subordinate Local Law No 1.
1280x2710 A NL-2B
1 1
PROPOSED REPOSITIONING OF
WINDOW TO ALIGN WITH BB PROPOSED FRAMING TO BOX OUT
EXISTING BRICK WALL BELOW EXISTING STEPPED CORNER -
CG SUBJECT TO APPROVAL
PS
KC REF - (SUPPLIED BY OWNER) BEN
AWNING WINDOW WITH TINTED
+FLUTED GLASS - DUAL COLOUR - D
FRAMING - SILL FRAME TO BE CUSTOM E
TERRACOTTA COLOUR - WINDOW / CM PLI NER
A
P
SU OW
0
GLASS FRAME SURROUND DARK BIN
55 R OPEN CAVITY ZONE FOR AIR FLOW/
COLOUR - DETAILS BY OTHERS BY DE
x2
UNDER CIRCULATION TO REFRIDGERATOR MOTOR -
UN
80
E FINAL SPACE TBC AGAINST MANUF. DETAILS
12
IC B
FW-E A C
D
1030x1750 A
M
TP1
JR
2,580
04
SK-1
PROPOSED KIOSK
11.96 m2
-3
FW-E
NL
D
OI
/V
S
PO
CT
DU
SLIM PROFILE LIGHT BOX FIRE EXT.
G
BIN
EXISTING FLOORING TO REMAIN WITHIN TENANCY - TBC
L
TP2
TI
M
SK-2
LU
-P
MB
PD
NOMINAL VERTICAL STONE -
TO BE SITE MEASURED SH-D2
A
VERT. DISPLAY SHELVES FROM
-2
NL
NAT. STONE (ST-T) @ POINT OF CL
SA SH-D1
SALE (WITH LB BEHIND) CUP'B CUP'B UNDER CUP'B CUP'B
EXISTING WALL TO BE REMOVED TO
RO ALLOW FOR NEW CUP'B IN PACKOUT
- TBC ON SITE BY BUILDERS
2 2
EXISTING SERVICE DOOR TO REMAIN -
RE-PAINTED TO DARK COLOUR (TBC BY WATER EDB
CLIENT), REPLACE HANDLE AND LOCK
(BLACK SELECTION BY CLIENT + FW-E
EXISTING SERVICES APPROXIMATE LOCATION OF EXISTING
TUB / TAP TO REMAIN SERVICES - HOUSING TO BE COLOUR MATCHED
TO PROPOSED SK1N CLADDING COLOUR
EXISTING HWS
LOCATION TO REMAIN EXISTING FLOOR WASTE
WITHIN SERVICES HOUSING
EXISTING MAIN DOOR TO REMAIN - RE-PAINTED -
DARK COLOUR EXTERNALLY AND GREEN
INTERNALLY (TBC BY CLIENT), REPLACE HANDLE NOOSA COUNCIL
AND LOCK (BLACK SELECTION BY CLIENT APPROVED PLAN
EXISTING DECKING TO REMAIN 1
01 51901.4863.08 9 SEP 2025
A B
3.1Floor Plan - Proposed
1:20
Revision Notes. Project Client
0 1 2
Drawing
5
Date
10
Author
reitsma
Issue B - 23.06.2025 Figured dimensions only are to be taken from this drawing. All works must comply with NCC, local authority and all
- Increase Awning Window heights All dimensions, bearings, exis ng services, mandatory council relevant geographical/wind category requirements. All FOSTER & BLACK - HASTINGS FOSTER & BLACK Floor Plan - Proposed 25/08/2025 JTL
- Change Awnings to Fluted Glass ( nted)
- reduce overhead shelves restraints/requirements and proposed levels are to be checked and cut and fill ba ers are indica ve only and must be Scale Revision
verified on site by builder/client prior to commencement of works. established and verified by builder/client in rela on to
Any discrepancies must be communicated to the designer prior to proposed slab and/or floor levels SHOP 8 (No. 18) HASTINGS ST. Builder B
N
+61 493 062 182 13 Ridgewood Road. commencement of works. Please note, builder specifica ons and These drawings are to be read in conjunc on with other ADDITION PROJECTS Stage
Caloundra signed contracts to take precedence over all Reitsma documenta on. relevant consultants drawings and reports. NOOSA HEADS P: 0481 000 118 CONSTRUCTION Project Number Sheet Number
[email protected] QLD, 4551
www.reitsma.com.au Australia
© Reitsma+Associates Pty Ltd. A.T.F The Reitsma Family Trust ABN 62 631 178 013 - ACN 158 385 767
QBCC Lic. No. 1234490 BDAQ Member
QLD 4567 DOCUMENTATION 4707 5 /22
Document Set ID: 24058893
Version: 1, Version Date: 26/08/2025
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalFull text of the other 5 pages
Page 2
5,485 Council Annotation:
FINAL DETAILS TO SHOPFITTER/CABINET MAKERS SPECIFICATIONS
ALL CABINETRY TO HAVE ADJUSTABLE SHELVING
A No outdoor dining areas or
B FINAL EQUIPEMENT
2,054 3,431 Advertising
CASHDRAWER,
SIZES (FRIDGES, BINS, DISHWASHERS,
Devices
SINK, JUG RINERS are BYapart
ETC) TO BE CONFIRM CLIENTS of
PRIOR TO CABINETRY CONSTRUCTION
5,305
thisBEHIND/THROUGH
approval.
2,054 2,991 90 260 90ALLOW FOR SERVICES DUCT
PLUMBING AND POWER SERVICES
CABINETRY FOR
Advertising Devices are regulated
in accordance with the
176 2,710 545
Subordinate Local Law No 1.
5
16
90
1 1
90
260
440
350
670
90
5
90
2,
0
55
2,
70
0
2,434 550
2,054
1,964
FW-E
9
2,580
2,580
10
2,580
1,
1,750
1,750
1,430
2,050
439
FW-E
90 35
SLIM PROFILE LIGHT BOX 1
1
FIRE EXT.
31
NOMINAL VERTICAL STONE - 35 580 1,790 540
TO BE SITE MEASURED
180
256 180
9
VERT. DISPLAY SHELVES FROM 65
NAT. STONE (ST-T) @ POINT OF
300
SALE (WITH LB BEHIND)
346
390
25
2 2
4
90
90
WATER EDB
+ FW-E
LIGHT FILL REPRESENTS EXISTING WALLS
DARK FILL REPRESENTS PROPOSED WALLS
180 90 575 90 4,060 90 310 90
180 5,305
NOOSA COUNCIL
5,485 APPROVED PLAN
51901.4863.08 9 SEP 2025
A B
3.2Dimension Plan
1:20
Revision Notes. Project Client
0 1 2
Drawing
5
Date
10
Author
reitsma
Issue B - 23.06.2025 Figured dimensions only are to be taken from this drawing. All works must comply with NCC, local authority and all
- Increase Awning Window heights All dimensions, bearings, exis ng services, mandatory council relevant geographical/wind category requirements. All FOSTER & BLACK - HASTINGS FOSTER & BLACK Dimension Plan 25/08/2025 JTL
- Change Awnings to Fluted Glass ( nted)
- reduce overhead shelves restraints/requirements and proposed levels are to be checked and cut and fill ba ers are indica ve only and must be Scale Revision
verified on site by builder/client prior to commencement of works. established and verified by builder/client in rela on to
Any discrepancies must be communicated to the designer prior to proposed slab and/or floor levels SHOP 8 (No. 18) HASTINGS ST. Builder B
N
+61 493 062 182 13 Ridgewood Road. commencement of works. Please note, builder specifica ons and These drawings are to be read in conjunc on with other ADDITION PROJECTS Stage
Caloundra signed contracts to take precedence over all Reitsma documenta on. relevant consultants drawings and reports. NOOSA HEADS P: 0481 000 118 CONSTRUCTION Project Number Sheet Number
[email protected] QLD, 4551
www.reitsma.com.au Australia
© Reitsma+Associates Pty Ltd. A.T.F The Reitsma Family Trust ABN 62 631 178 013 - ACN 158 385 767
QBCC Lic. No. 1234490 BDAQ Member
QLD 4567 DOCUMENTATION 4707 6 /22
Document Set ID: 24058893
Version: 1, Version Date: 26/08/2025
Page 3
FINAL DETAILS TO SHOPFITTER/CABINET MAKERS SPECIFICATIONS
A B Council Annotation:
ALL CABINETRY TO HAVE ADJUSTABLE SHELVING
5,305 No outdoor dining areas or
FINAL EQUIPEMENT SIZES (FRIDGES, BINS, DISHWASHERS,
CASHDRAWER, SINK, JUG RINERS ETC) TO BE CONFIRM BY CLIENTS
PRIOR TO CABINETRY CONSTRUCTION
Advertising Devices are apart of
ALLOW FOR SERVICES DUCT BEHIND/THROUGH CABINETRY FOR this approval.
PLUMBING AND POWER SERVICES NL-1
STRICTLY NO VISIBLE METAL CAPPINGS / FLASHINGS TO TOP OR
SIDES OF TILED ROOF (TYPICAL) - INSTALLATION TO COMPLY Advertising Devices are regulated
WITH MANUFACTURES SPEC. - REFER SECTION & DETAILS
[email protected]° ROOF PITCH
APPROX. TOP OF EXISTING 3.400 in accordance with the
ROOF P
ITCH SK1N
PROPOSED TOP OF ROOF R.L. 3.320 (NOM)
EXISTING AC CONDENSOR UNIT RELOCATED -
Subordinate Local Law No 1.
NO VISIBLE GUTTERING (AS PER EXISTING STRUTURE - 5.5°
INSTALLATION TO COMPLY WITH MANUFACTURES SPEC. - RF @ 1 AC NEW WALL BRACKETS (TO BE SLIM PROFILE)
970
REFER SECTION & DETAILS (SUBJECT TO APPROVAL) RL 2.602 (NOM)
PMF
SLIM PROFILE ALUMINIUM POWDERCOATED
PERIMETER FRAMING AROUND OPENINGS (PC-T SK1N
COLOUR) TO CAP ENDS OF SK1N TILE CLADDING CEILING HEIGHT 2.350
PROPOSED FRAMING TO BOX OUT EXISTING
STEPPED CORNER - SUBJECT TO APPROVAL
3,320
WALL MOUNTED REVERSE OSMOSIS WATER
NL-2A
FILTER SYSTEM - SUPPLIED BY OWNER
(WITHIN SERVICE CUPBOARD) CL
EXISTING SERVICE DOOR TO REMAIN - RE-PAINTED
2,040 NOM
2,350
(EXISTING)
TO DARK COLOUR (TBC BY CLIENT), REPLACE EDB
HANDLE AND LOCK (BLACK SELECTION BY CLIENT
EXISTING MAIN DOOR TO REMAIN - RE-PAINTED - DARK BEN
COLOUR EXTERNALLY AND GREEN INTERNALLY (TBC BY CLIENT),
REPLACE HANDLE AND LOCK (BLACK SELECTION BY CLIENT
ALUMINIUM PERIMETER KICK (PC-T FINISH) - TO WATER
ALLOW FOR CLADDING FINISH TO STOP ABOVE FGL
(NOM)
FLOOR LEVEL 0.000 (EXISTING)
50
TDK
01 Eleva on 01 (West)
1:50
A B
NL-1
STRICTLY NO VISIBLE METAL CAPPINGS / FLASHINGS TO TOP OR
SIDES OF TILED ROOF (TYPICAL) - INSTALLATION TO COMPLY
WITH MANUFACTURES SPEC. - REFER SECTION & DETAILS
APPROX. TOP OF EXISTING 3.400
H
PITC SK1N RF @ PROPOSED TOP OF ROOF R.L. 3.320 (NOM)
° ROOF 15.5°
ROOF
5.5
RF @1 PITCH
970
RL 2.602 (NOM)
NO VISIBLE GUTTERING (AS PER EXISTING STRUTURE -
INSTALLATION TO COMPLY WITH MANUFACTURES SPEC. -
REFER SECTION & DETAILS (SUBJECT TO APPROVAL) SK1N
CEILING HEIGHT 2.350
SLIM PROFILE ALUMINIUM POWDERCOATED
PERIMETER FRAMING AROUND OPENINGS (PC-T
3,320
1,280
1,400
NL-2A
NL-2B
COLOUR) TO CAP ENDS OF SK1N TILE CLADDING
AWNING WINDOW WITH TINTED+FLUTED GLASS - DUAL
2,350
COLOUR FRAMING - SILL FRAME TO BE CUSTOM POS
TERRACOTTA COLOUR - WINDOW / GLASS FRAME A A
SURROUND DARK COLOUR - DETAILS BY OTHERS
NL-3
PROPOSED FRAMING TO BOX OUT EXISTING
300
STEPPED CORNER - SUBJECT TO APPROVAL CL CL
940
880
ALUMINIUM PERIMETER KICK (PC-T FINISH) - TO
500
ALLOW FOR CLADDING FINISH TO STOP ABOVE FGL
FLOOR LEVEL 0.000 (EXISTING)
NOOSA COUNCIL
APPROVED PLAN
51901.4863.08 9 SEP 2025
02 Eleva on 02 (North)
1:50
0 1 2 5 10
Revision Notes. Project Client Drawing Date Author
reitsma
Issue B - 23.06.2025 Figured dimensions only are to be taken from this drawing. All works must comply with NCC, local authority and all
- Increase Awning Window heights All dimensions, bearings, exis ng services, mandatory council relevant geographical/wind category requirements. All FOSTER & BLACK - HASTINGS FOSTER & BLACK Eleva ons 1+2 25/08/2025 JTL
- Change Awnings to Fluted Glass ( nted)
- reduce overhead shelves restraints/requirements and proposed levels are to be checked and cut and fill ba ers are indica ve only and must be Scale Revision
verified on site by builder/client prior to commencement of works. established and verified by builder/client in rela on to
Any discrepancies must be communicated to the designer prior to proposed slab and/or floor levels SHOP 8 (No. 18) HASTINGS ST. Builder 1:50 B
N
+61 493 062 182 13 Ridgewood Road. commencement of works. Please note, builder specifica ons and These drawings are to be read in conjunc on with other ADDITION PROJECTS Stage
Caloundra signed contracts to take precedence over all Reitsma documenta on. relevant consultants drawings and reports. NOOSA HEADS P: 0481 000 118 CONSTRUCTION Project Number Sheet Number
[email protected] QLD, 4551
www.reitsma.com.au Australia
© Reitsma+Associates Pty Ltd. A.T.F The Reitsma Family Trust ABN 62 631 178 013 - ACN 158 385 767
QBCC Lic. No. 1234490 BDAQ Member
QLD 4567 DOCUMENTATION 4707 7 /22
Document Set ID: 24058893
Version: 1, Version Date: 26/08/2025
Page 4
FINAL DETAILS TO SHOPFITTER/CABINET MAKERS SPECIFICATIONS
B A Council Annotation:
ALL CABINETRY TO HAVE ADJUSTABLE SHELVING
5,305 No outdoor dining areas or
FINAL EQUIPEMENT SIZES (FRIDGES, BINS, DISHWASHERS,
CASHDRAWER, SINK, JUG RINERS ETC) TO BE CONFIRM BY CLIENTS
PRIOR TO CABINETRY CONSTRUCTION
Advertising Devices are apart of
ALLOW FOR SERVICES DUCT BEHIND/THROUGH CABINETRY FOR
NL-1
this approval.
PLUMBING AND POWER SERVICES
Advertising Devices are regulated
[email protected]° ROOF PITCH
APPROX. TOP OF EXISTING 3.400 in accordance with the
PROPOSED TOP OF ROOF R.L. 3.320 (NOM)
STRICTLY NO VISIBLE METAL CAPPINGS / FLASHINGS TO TOP OR
SIDES OF TILED ROOF (TYPICAL) - INSTALLATION TO COMPLY SK1N RF @ 1
5.5° RO Subordinate Local Law No 1.
WITH MANUFACTURES SPEC. - REFER SECTION & DETAILS OF PIT
CH
970
RL 2.602 (NOM)
NO VISIBLE GUTTERING (AS PER EXISTING STRUTURE -
INSTALLATION TO COMPLY WITH MANUFACTURES SPEC. -
REFER SECTION & DETAILS (SUBJECT TO APPROVAL) SK1N SK1N
CEILING HEIGHT 2.350
SLIM PROFILE ALUMINIUM POWDERCOATED
3,320
PERIMETER FRAMING AROUND OPENINGS (PC-T
NL-2A
NL-2B
1,400
1,280
1,400
COLOUR) TO CAP ENDS OF SK1N TILE CLADDING
AWNING WINDOW WITH TINTED+FLUTED GLASS - DUAL
2,350
COLOUR FRAMING - SILL FRAME TO BE CUSTOM A A
TERRACOTTA COLOUR - WINDOW / GLASS FRAME POS
SURROUND DARK COLOUR - DETAILS BY OTHERS NL-3
300
PROPOSED FRAMING TO BOX OUT EXISTING CL CL
STEPPED CORNER - SUBJECT TO APPROVAL
940
880
880
500
FLOOR LEVEL 0.000 (EXISTING)
ALUMINIUM PERIMETER KICK (PC-T FINISH) - TO
ALLOW FOR CLADDING FINISH TO STOP ABOVE FGL
03 Eleva on 03 (East)
1:50
2 1
2,580
STRICTLY NO VISIBLE METAL CAPPINGS / FLASHINGS TO TOP OR NL-1
SIDES OF TILED ROOF (TYPICAL) - INSTALLATION TO COMPLY
WITH MANUFACTURES SPEC. - REFER SECTION & DETAILS
APPROX. TOP OF EXISTING 3.400
PROPOSED TOP OF ROOF R.L. 3.320 (NOM)
EXISTING AC CONDENSOR UNIT RELOCATED - AC
NEW WALL BRACKETS (TO BE SLIM PROFILE) SK1N RF @ NO VISIBLE GUTTERING (AS PER
15.5° EXISTING STRUTURE - INSTALLATION
ROOF
970
RL 2.602 (NOM) PITCH TO COMPLY WITH MANUFACTURES
SPEC. - REFER SECTION & DETAILS
(SUBJECT TO APPROVAL)
CL
CEILING HEIGHT 2.350
SLIM PROFILE ALUMINIUM POWDERCOATED
PERIMETER FRAMING AROUND OPENINGS (PC-T
3,320
COLOUR) TO CAP ENDS OF SK1N TILE CLADDING
NL-2B
1,400
1,030
AWNING WINDOW WITH TINTED+FLUTED GLASS - DUAL
2,350
COLOUR FRAMING - SILL FRAME TO BE CUSTOM A
TERRACOTTA COLOUR - WINDOW / GLASS FRAME
SURROUND DARK COLOUR - DETAILS BY OTHERS
BEN PROPOSED FRAMING TO BOX
20
PROPOSED FRAMING TO BOX OUT EXISTING
STEPPED CORNER - SUBJECT TO APPROVAL OUT EXISTING STEPPED CORNER
940 - SUBJECT TO APPROVAL
880
700
FLOOR LEVEL 0.000 (EXISTING)
(NOM)
NOOSA COUNCIL
200
ALUMINIUM PERIMETER KICK (PC-T FINISH) - TO APPROVED PLAN
ALLOW FOR CLADDING FINISH TO STOP ABOVE FGL
51901.4863.08 9 SEP 2025
Revision Notes.
04 Eleva on 04 (South)
1:50
Project Client
0 1 2
Drawing
5
Date
10
Author
reitsma
Issue B - 23.06.2025 Figured dimensions only are to be taken from this drawing. All works must comply with NCC, local authority and all
- Increase Awning Window heights All dimensions, bearings, exis ng services, mandatory council relevant geographical/wind category requirements. All FOSTER & BLACK - HASTINGS FOSTER & BLACK Eleva ons 3+4 25/08/2025 JTL
- Change Awnings to Fluted Glass ( nted)
- reduce overhead shelves restraints/requirements and proposed levels are to be checked and cut and fill ba ers are indica ve only and must be Scale Revision
verified on site by builder/client prior to commencement of works. established and verified by builder/client in rela on to
Any discrepancies must be communicated to the designer prior to proposed slab and/or floor levels SHOP 8 (No. 18) HASTINGS ST. Builder 1:50 B
N
+61 493 062 182 13 Ridgewood Road. commencement of works. Please note, builder specifica ons and These drawings are to be read in conjunc on with other ADDITION PROJECTS Stage
Caloundra signed contracts to take precedence over all Reitsma documenta on. relevant consultants drawings and reports. NOOSA HEADS P: 0481 000 118 CONSTRUCTION Project Number Sheet Number
[email protected] QLD, 4551
www.reitsma.com.au Australia
© Reitsma+Associates Pty Ltd. A.T.F The Reitsma Family Trust ABN 62 631 178 013 - ACN 158 385 767
QBCC Lic. No. 1234490 BDAQ Member
QLD 4567 DOCUMENTATION 4707 8 /22
Document Set ID: 24058893
Version: 1, Version Date: 26/08/2025
Page 5
Council Annotation:
No outdoor dining areas or
A B Advertising Devices are apart of
5,774
this approval.
Advertising Devices are regulated
2,160 3,614
in accordance with the
Subordinate Local Law No 1.
NO VISIBLE GUTTERING (AS PER EXISTING STRUTURE - INSTALLATION TO COMPLY WITH
MANUFACTURES SPEC. - REFER SECTION & DETAILS (SUBJECT TO APPROVAL)
1 1
H
) IT
AL Y W
OV PL
PR M
AP CO
STRICTLY NO VISIBLE METAL CAPPINGS / FLASHINGS TO TOP OR
TO TO
SIDES OF TILED ROOF (TYPICAL) - INSTALLATION TO COMPLY
CT N
WITH MANUFACTURES SPEC. - REFER SECTION & DETAILS
JE TIO
(NOM)
UB LA
1,395
(S AL
ILS ST
TA - IN
OM 9
DE E
(N 3,05
)
& UR C
N T
L
IO RU
2,800
CT ST
2,165
(NOM)
SE GN
ER TI
EF XIS
-R E
2,515
2,515
C. ER
PE S P
NL-1
S S (A
RF ROOF TILE @
RE NG
C
L
TU RI
15.5° ROOF PITCH
AC TTE
UF U
APPROX 8m2
AN E G
M IBL
TERRACOTTA (SK1N FINISHED TBC) TILED ROOF -
@ H
S
VI
LE ITC
INSTALLATION TO MANF. DETAILS - ENGINEERING
NO
I
T P2 ADVICE REQUIRED FOR LOW PITCH
F
O OF 4.5m
O
R RO OX ROOF TILE CONNECTION
RF .5° APPR
ON HIP TO BUILDER AND
MANUFACTURER DETAIL
15
229
STRICTLY NO VISIBLE METAL CAPPINGS / FLASHINGS TO TOP OR STRICTLY NO VISIBLE METAL CAPPINGS / FLASHINGS TO TOP OR
32 OM
(N
SIDES OF TILED ROOF (TYPICAL) - INSTALLATION TO COMPLY WITH SIDES OF TILED ROOF (TYPICAL) - INSTALLATION TO COMPLY WITH
4 )
MANUFACTURES SPEC. - REFER SECTION & DETAILS MANUFACTURES SPEC. - REFER SECTION & DETAILS
121
300
2 2
PAN METAL FLASHED ROOF - TERRACOTTA
COLOUR (TO BUILDERS DETAILS)
AC (WALL MOUNTED SYSTEM WITH
CUSTOMISED BRACKETS TO ENSURE AC HEIGHT
DOES NOT PROTUDE ABOVE TOP OF ROOF)
5,544
229 2,973 2,572
5,774
NOOSA COUNCIL
APPROVED PLAN
51901.4863.08 9 SEP 2025
A B
3.11Roof Layout 1:20
Revision Notes. Project Client
0 1 2
Drawing
5
Date
10
Author
reitsma
Issue B - 23.06.2025
- Increase Awning Window heights
Figured dimensions only are to be taken from this drawing.
All dimensions, bearings, exis ng services, mandatory council
All works must comply with NCC, local authority and all
relevant geographical/wind category requirements. All FOSTER & BLACK - HASTINGS FOSTER & BLACK Roof Layout 1:20
25/08/2025 JTL
- Change Awnings to Fluted Glass ( nted)
- reduce overhead shelves restraints/requirements and proposed levels are to be checked and cut and fill ba ers are indica ve only and must be Scale Revision
verified on site by builder/client prior to commencement of works. established and verified by builder/client in rela on to
Any discrepancies must be communicated to the designer prior to proposed slab and/or floor levels SHOP 8 (No. 18) HASTINGS ST. Builder B
N
+61 493 062 182 13 Ridgewood Road. commencement of works. Please note, builder specifica ons and These drawings are to be read in conjunc on with other ADDITION PROJECTS Stage
Caloundra signed contracts to take precedence over all Reitsma documenta on. relevant consultants drawings and reports. NOOSA HEADS P: 0481 000 118 CONSTRUCTION Project Number Sheet Number
[email protected] QLD, 4551
www.reitsma.com.au Australia
© Reitsma+Associates Pty Ltd. A.T.F The Reitsma Family Trust ABN 62 631 178 013 - ACN 158 385 767
QBCC Lic. No. 1234490 BDAQ Member
QLD 4567 DOCUMENTATION 4707 15 /22
Document Set ID: 24058893
Version: 1, Version Date: 26/08/2025
Page 6
01 External View (P.O.S Counter)
N.T.S. 02 External View - Collec on Counter
N.T.S.
03 External View - Wai ng Counter
N.T.S. 04 External View - Rear Access
N.T.S.
NOOSA COUNCIL
APPROVED PLAN
Council Annotation: 51901.4863.08 9 SEP 2025
3.14 Perspec ve Views 01-04
No outdoor dining areas or
1:100
Advertising Devices are apart of Revision Notes. Project Client Drawing Date Author
reitsma
Issue B - 23.06.2025 Figured dimensions only are to be taken from this drawing. All works must comply with NCC, local authority and all
- Increase Awning Window heights All dimensions, bearings, exis ng services, mandatory council relevant geographical/wind category requirements. All FOSTER & BLACK - HASTINGS FOSTER & BLACK Perspec ve Views 01-04 25/08/2025 JTL
this approval. - Change Awnings to Fluted Glass ( nted)
- reduce overhead shelves restraints/requirements and proposed levels are to be checked and
verified on site by builder/client prior to commencement of works.
cut and fill ba ers are indica ve only and must be
established and verified by builder/client in rela on to
Scale Revision
Any discrepancies must be communicated to the designer prior to proposed slab and/or floor levels SHOP 8 (No. 18) HASTINGS ST. Builder N.T.S. B
Advertising
+61 493 062 182 Devices are
Road. regulated
N
13 Ridgewood commencement of works. Please note, builder specifica ons and These drawings are to be read in conjunc on with other ADDITION PROJECTS Stage
Caloundra signed contracts to take precedence over all Reitsma documenta on. relevant consultants drawings and reports. NOOSA HEADS P: 0481 000 118 CONSTRUCTION Project Number Sheet Number
[email protected]
in accordance Australia
www.reitsma.com.au
QLD, 4551
with the © Reitsma+Associates Pty Ltd. A.T.F The Reitsma Family Trust ABN 62 631 178 013 - ACN 158 385 767
QBCC Lic. No. 1234490 BDAQ Member
QLD 4567 DOCUMENTATION 4707 18 /22
DocumentSubordinate
Set ID: 24058893 Local Law No 1.
Version: 1, Version Date: 26/08/2025
Used in these records
Approved Plan - 51901.4863.018 (As Published).pdfRelated documentApplication case desk ↗
About this file
- File size
- 2.2 MB (large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take up to a minute.