Original source · versioned page text
Arborist Report Viewland 32 (Dec2021)
DETERMINING THE ROOT PROTECTION ZONE
The purpose of the RPZ is to protect the area of roots required to maintain the tree’s vigour and stability
during the development process and into the long term. The RPZ is calculated for each tree based on its
age class and vigour class. Each tree may be fenced off to form an enclosure with the tree at the centre,
or an existing structure may be utilized, being retained such as a wall or fence.
Table 2 provides the means for determining RPZ based on the age and vigour of the tree, as assessed by
the project arborist.
The minimum radius of the RPZ is determined by multiplying the DBH, in metres, by the appropriate
multiplier, given in Column 3 of Table 2.
TABLE 2
CALCULATING THE MINIMUM RPZ
(EXCEPT FOR PALMS, CYCADS AND TREE FERNS)
Tree Age Tree Vigour RPZ radius (M)
Young trees (age less than 20% of life Good Vigour 6 x DBH
expectancy in situ)
Poor Vigour 9 x DBH
Mature trees (age between 20% and 80%Good
of Vigour 9 x DBH
life expectancy in situ)
Poor Vigour 12 x DBH
Over mature trees (age greater than Good Vigour 12 x DBH
80% of life expectancy in situ)
Poor Vigour 15 x DBH
NOTES:
1. Radial distances are measured from the centre of the stem at ground level.
2. The RPZ distances in this table are based on a good species tolerance to site disturbance. There
are no scientific data of tree tolerances for Australian conditions.
3. No tree should have RPZ less than 2 m or greater than 15 m. The RPZ of palms and other
monocots, cycads and tree ferns must be 1 m outside the dripline edge of the crown.
Page 14 of 16
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
Large file: the download may take up to a minute.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.