Skip to the record
Accept no imitations.

Original source · versioned page text

Attachment D - Bushfire Hazard Assessment

of 19

Page text shows just the words. Original shows the document exactly as it was published.

Page text read automatically using OCR, there may be inaccuracies

                                                                   [9]


         j     The ring main will also contain additional hydrants points with a 50mm cam lock fixture, to allow for
               connection by QFES rural appliances if and when required.
7        Furthermore, we note the proposal also includes a swimming pool and as such this water storage can also
         be included within the necessary water storage for bushfire suppression if and when required.

Conclusions

Based on our site inspection, our review of the Noosa Plan Bushfire Hazard Overlay Mapping and the State
Planning Policy, Natural Hazards, Risk and Resilience bushfire hazard mapping we have come to the following
conclusions: -

1        Based on the current land management practice within the subject site, the whole property can be
         effectively described as being in a bushfire buffer area,
2        Lake Cooroibah Road form a minimal 15.3 metres wide firebreak between the northern boundary of the site
         and the southern boundary of the Great Sandy National Park. Furthermore, this portion of the Great Sandy
         National Park is relatively isolated area and is bounded by cleared rural properties to the west and the
         Noosa River to the north and other cleared and partially cleared rural lands to the east and south along
         Lake Cooroibah Road.
3        The area of “bushland” within 400 Lake Cooroibah Road abutting the subject site is approximately 90
         metres in length with the remaining portion of the property, some 138 metres consisting of mature trees
         along the property boundary to the adjacent area inside that property being subjected to regular mowing.
4        The sites western boundary abuts an area of vegetation within 384 lake Cooroibah Road with a vegetated
         interface of approximately 173 metres.
5        While the area around the site can be described as hazardous vegetation, the tenting structures are not
         considered to be Class 1, 2 or 3 structures and as such are not required to comply with the Australian
         Standard AS3959-2018. However, tents are mentioned in the Queensland Development Code under
         MP3.2 and while AS/NZS 2293.1-1998 and AS/NZS 1851.1-1995 are referred to, while AS3959 is not.
6        However, it is reasonable to conclude that a minimum setback necessary to achieve a Radiant heat flux of
         12.5 kW/m2 is required particularly for those tenting structures which are to be located along the site’s
         western boundary, adjacent to 384 Lake Cooroibah Road. Table 1 below provides the minimum radiant
         heat flux setback distances from the edge of the hazardous vegetation along the western boundary for
         those tenting structures abutting that boundary.
Table 1 – Minimal Radiant heat flux setback distances
Minimum Distance Calculator - AS3959-2009 (Method 2) - 396 Lake Cooroibah Rod, Cooroibah
Calculated March 18, 2019, 3:15 pm (MDc v.4.8)
Inputs                                     Outputs

Fire Danger Index           47             Rate of spread                   0.9 km/h

Vegetation classification   Woodland       Flame length                     8.83 m

Surface fuel load           15 t/ha        Flame angle                      54 °, 64 °, 73 °, 78 °, 80 ° & 85 °

Overall fuel load           24.5 t/ha      Elevation of receiver            3.44 m, 3.79 m, 3.96 m, 3.94 m, 3.9 m & 3.19 m

Vegetation height           n/a            Fire intensity                   11,473 kW/m

Effective slope             1°             Transmissivity                   0.871, 0.857, 0.836, 0.813, 0.799 & 0.724

Site slope                  1°             Viewfactor                       0.5996, 0.4421, 0.2965, 0.2015, 0.1643 & 0.0452

Flame width                 100 m          Minimum distance to < 40 kW/m²                         7.23 m

Windspeed                   n/a            Minimum distance to < 29 kW/m²                         9.90 m

Heat of combustion          18,600 kJ/kg   Minimum distance to < 19 kW/m²                        14.70 m
Log in to download the original file

Attachment D - Bushfire Hazard Assessment.pdf · 3.4 MB (large file)

Large file: the download may take up to a minute.

Searchable page text hides email addresses. Original files are unchanged and may show email addresses.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.