Original source · versioned page text
Landscape Plans OPW Package - 41 Sunshine Beach Rd - 4 May 2021
From the archive 210430 OP WORKS package.zip, inside Op Works for Noosa Mode - 41 Sunshine Beach Road. File date in the archive: 2021-05-05 10:40.
General Notes
NOTE: This landscape plan must be read in conjunction with the appropriate
statutory approvals and Australian standards.
GENERAL REVEGETATION PLANTING
· For more detail refer to the project architect's, and engineers drawings. · Plant stock is to be approved by contractor and qualified arborist prior to
acceptance of delivery.
· Planting shown reflects the design intent, exact numbers and locations will · Mulch bed areas should not exceed a 1:3 grade. where slopes are greater than
require confirmation on site by the superintendent. any changes to be made 1:3 install biodegradable mulch retaining netting.
SUNSHINE COAST
to the landscape plan must be approved by the landscape architect and · Where slopes are greater than 1:2 install jute mesh product to manufacturers
superintendent. specification. Level 1, 24 Duporth Avenue
· Cultivate subgrade to a depth of 150mm and treat with 150mg/m2 of gypsum. Maroochydore QLD 4558
· All structures to be approved by the appropriate government departments · Install ameliorated organic topsoil to a depth of 200mm. T + 61 7 5499 6188
prior to any construction taking place. · Install organic mulch to a depth of 100mm keeping 50mm clear of plant stems
and tree trunks.
· All landscape plans presented assume that all base and survey information is · No synthetic, granular blended fertilisers to be used on site. slow release © Place Design Group Pty Ltd A.C.N. 082 370 063
accurate and to scale. the contractor shall check landscape plans presented organic tree tablets shall be used at establishment.
for any discrepancies with the existing site conditions or other drawings · All plantings shall incorporate the inclusion of a slow release native plant All information displayed, transmitted or carried within this drawing is
protected by Copyright and Intellectual Property laws.
presented prior to any construction work taking place. if discrepancies do fertilizer (as per manufacturers specification) and the use of a soil moisture The information contained in this document is confidential.
Recipients of this document are prohibited from disclosing the information
occur these shall be highlighted at once to the superintendent prior to any retention additive (as per manufacturers specification), placed adjacent the herein to any person without the written consent of Place Design Group.
construction work taking place. plant root ball at the time of planting. Annotated dimensions take precedence over any measures of scale.
Verify all dimensions on site prior to construction.
This drawing may display with permission a combination of specialist and
THE CONTRACTOR SHALL: TOPSOIL other consultant(s) input and linework.
Nominated specialist and consultant information contained within this
· Install silt control fencing as required. · Install approved imported topsoil (to comply with aC1419) to planting areas if document is referenced from their supplied documentation and is
· Remove all unwanted material from site. ameliorated site topsoil is not available. contained in this document as indicative only and not for construction or
certification purposes.
· Confirm all dimensions on site prior to construction. · Where site soil is to be used as topsoil, ameliorate site soil as specified by the
· Seek instruction from superintendent where level discrepancies, specification soil testing laboratory. all soil stockpiles are to be maintained to control PROJECT
substitutions and poor soil structure occurs. weeds routinely and guard against dispersion by wind or water. stockpiles
shall be limited to a max. height of 2m and may require covering or retaining. 41 SUNSHINE BEACH
SERVICES stockpiles are not permitted within close proximity to residential properties.
· The contractor shall confirm the location of all services with relevant · generally soil to be used shall comply with the following specification: RD, NOOSA HEADS
authorities prior to planting and excavation. · (1) friable and free draining.
· All trees must be planted a min. of 1000mm from underground services. · (2) good texture and structure for selected use CLIENT
· (3) acceptable conductivity and ph levels for intended plant species to be
SUBSOIL DRAINAGE planted.
· Install sub-soil drains as required and where garden abuts building and BDH GROUP
connect into storm water drainage system. MULCH INVESTMENTS PTY LTD
· Sub soil drains shall incorporate a trench with a geotextile lining, drainage · All mulch proposed to be used on site shall be free of foreign matter including
gravel backfill material and a 100mm slotted ag pipe to the following anthropogenic waste, rock, soil, sediment contamination, weeds and sticks. NOTES
specification. · Planted areas shall be mulched to a minimum 100mm deep to ensure site
·· Geotextile material: Geotextile material shall be a non-woven type and water conservation requirements are achieved. ALL MEMBER SIZES, CONNECTIONS, FOOTINGS ETC
shall have a strength rating (G) of greater than 900 ARE TO BE CONFIRMED BY AN ENGINEER. SIZES
· Keep mulch 50mm clear of plant stem. NOMINATED ARE INDICATIVE OF FINAL APPEARANCE
·· Backfill material: 20mm drainage aggregate in accordance with AS 2758 - REQUIRED. CONTRACTOR IS TO PROVIDE SHOP
1998. GRADES DRAWINGS FOR APPROVAL BEFORE COMMENCING
·· Drainage Pipes: 100mm Ø Slotted ag pipes shall comply with AS 2439-Part · Mulch garden bed areas should not exceed a 1:3 grade and turf areas should CONSTRUCTION.
1 "Perforated Drainage Pipe and Associated Fittings". Perforations shall not exceed a 1:4 grade.
ALL WATER PROOF MEMBRANES, HYDRAULIC
not exceed 0.7mm in diameter or width. FITTINGS, ELECTRICAL / LIGHTING FITTINGS AND
· Ensure drainage works correlate with adjacent land and specified finished IRRIGATION REINFORCED CONCRETE STRUCTURES ETC TO
levels. · These landscape plans assume all landscaped areas will be irrigated ENGINEERS, ARCHITECTS, HYDRAULIC ENGINEERS,
automatically with popup sprinklers and sprays, drip irrigation only to be used ELECTRICAL ENGINEERS DETAILS AND
SURFACE DRAINAGE SPECIFICATIONS.
in small raised planters and on podium in small planted areas. Irrigation SIZES NOMINATED ARE INDICATIVE OF FINAL
· Install field inlets to locations and levels as indicated on plans. Finish surface system to be installed to appropriate standards and by a suitably qualified APPEARANCE REQUIRED
pit level flush with adjacent finished surface levels. Ensure positive overland person and have a minimum 12 month warranty.
drainage flow to all pits and that no ponding occurs around the pit. Align all · Ensure a non-return valve is fitted to town water connections
pits square with to paths, pavement patterns, kerbs, walls and alike.
· Install continuous surface drainage system to locations and levels as indicated WARRANTIES
on plans. Finish surface pit level flush with adjacent finished surface levels. · Warranties or guarantees specified shall name the Principal as warrantee.
Ensure positive overland drainage flow to all continuos pits and that no Register with manufacturers as necessary. Retain copies delivered with and
ponding occurs around the pit. Align all pits square with to paths, pavement compnents and equipment to the Principal.
patterns, kerbs, walls and alike. · Warranties and/or guarantees to be submitted to the Superintendent for
· Install pits to manufacturer's recommendations. transmission to the Pricipal within fourteen (14) days after practical
competion.
TURF AREAS · Commence Warranty periods at practical completion or at acceptance of FOR APPROVAL
· Cultivate ground to a depth of 150mm and level/trim, treat with 150mg/m2 of installation, if acceptance is not concurrent with practical completion.
gypsum. · If installation is not by manufacturer and product warranty is conditional on
ISSUE CODE ISSUE DESCRIPTION BY CHK DATE
· Install 100mm of approved topsoil as specified. the manufacturer's approval of the installer, submit the manufacturer's
01 PRE PRELIMINARY RY JB 19/04/2021
· Finished turf grades/contours to be generally smooth, coordinate on site with written approval of the installing firm.
02 PRE PRELIMINARY RY JB 24/04/2021
superintendent and ensure levels are approved prior to turfing.
CA01 CA COUNCIL APPROVAL RY JB 4/05/2021
· Supply and lay turf as indicated on the drawings. MAINTENANCE TASKS
· Water turf in well and refer to suppliers maintenance requirement for Maintain whole of landscape works for establishment period of 13 weeks.
establishment. · Irrigation and watering
· Apply water to maintain soil moisture until established. ·· Every 2-3 days during the establishment period.
·· Once a week there after.
PLANTING LAYOUTS · Weed removal and wick wiping
· All planting layouts are to be approved by the landscape architect on site prior ·· As required to reduce competition and seeding.
to planting. · Plant Replacement
·· Immediately replace plants that die or fail to thrive, are damaged or
GENERAL PLANTING stolen, with plants of the same species and of similar size and quality
· Plant stock is to be approved by contractor and qualified arborist prior to unless otherwise specified.
acceptance of delivery. · Stakes and Guys
· Mulch bed areas should not exceed a 1:3 grade. where slopes are greater than ·· Adjust and/or replace stakes and ties where required. Remove staking
1:3 install biodegradable mulch retaining netting.Where slopes are greater and guying when instructed by the superintedent.
than 1:2 install jute mesh product to manufacturers specification. · Remulching
· For mass planting in mulch bed areas excavate to a depth of 300mm. ·· As required to maintain a consistent depth until plants are established.
· Cultivate subgrade to a depth of 150mm and treat with 150mg/m2 of gypsum. · Monitoring
· Install specified topsoil and crown bed at centre with mulch as specified. ·· Provide a monthly report on completed tasks. PRE - Preliminary | CA - Council Approval | T - Tender | CON - Construction
· No synthetic, granular blended fertilisers to be used on site. slow release DRAWING TITLE
organic tree tablets shall be used at establishment.
· All plantings shall incorporate the inclusion of a slow release native plant SPECIFICATION
fertilizer (as per manufacturers specification) and the use of a soil moisture
retention additive (as per manufacturers specification), placed adjacent the
plant root ball at the time of planting.
· Trees are to be certified by a qualified arborist as natspec compliant prior to
delivery to site. Qualified arborist to select natspec compliant trees at nursery DESIGN : JB
and check on delivery to site.
DOCUMENT : RY
PROJECT : 2020069
SCALE AS SHOWN @ A1
DRAWING NUMBER REVISION
2020069-001 CA01
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalSearchable page text hides email addresses. Original files are unchanged and may show email addresses.