Council archive · source document
Reference Document - 152000.200053.3 - Bushfire Fire Risk Assessment (As Published)
Very large file (12.2 MB): the original may take a few minutes to open or download. The page text below is quick to read.
Bushfire Risk Assessment v3 NCES REF: J001433
Select Areas of Noosa Springs Residential Estate, Noosa Heads
Table 3 – <29 kW/m² Radiant Heat Flux Setbacks
Area / VHC Radiant Heat Flux (kW/m²) Minimum Separation required
(metres)*
1 / 3.1 <29 2.8
1 /9.1 <29 9.6
2 / 8.1 <29 15
3 / 8.1 <29 17
3 / 22.1 <29 14
4 / 8.1 <29 15
* Source – Flamesol Minimum Distance calculator
Based on site observations, most dwellings flanking Area 1 readily satisfy the applicable 2.8m
separation distance to VHC 3.1 and 9.1. Conversely, most dwellings flanking Areas 2-4 do not
satisfy the applicable separation distances required to achieve <29 kW/m² radiant heat flux
exposure. This comparison does not indicate non-compliance with any statutory requirement, but
reflects assessment against a surrogate risk benchmark.
An example of insufficient separation occurs adjacent to Lot 54 in Area 3 as shown in Plate 27.
Vegetation in
17m APZ
17m building
offset approx.
Plate 27 – Lot 54 (Area 3) with woody vegetation within 17m of the <29 kW/m² separation requirement.
5.2.2.3 Asset Protection Zone Design
Any lots subsequently mapped in the future in a Designated Bushfire Prone Area should seek to
© 2026 39
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Reference Document - 152000.200053.3 - Bushfire Fire Risk Assessment (As Published).pdfRelated documentApplication case desk ↗
About this file
- File size
- 12.2 MB (very large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.