Original source · versioned page text
Appendix A - Proposal Plans
Plans and drawings
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawn REVISION
No. DATE DESCRIPTION ISS. BY
D. A .
E O R
F T I ON
STREET PERSPECTIVE
U
I S S T F O R CON S TRUC
NO
matt bradley designs
O'MALLEY RESIDENCE DRAWING REGISTER ©MATT BRADLEY DESIGNS - ACN: 637 963 396 - ABN: 53 637 963 396
www.mattbradleydesigns.com.au - [email protected] - 0488 554 020
ALL DESIGN, CONSTRUCTION METHODS & MATERIALS TO BE IN ACCORDANCE WITH:
CARETAKERS RESIDENCE - HOUSE RELOCATION
- THE BUILDING CODE OF AUSTRALIA (BCA);
NO. DRAWING NAME ISSUE LATEST REVISION DESCRIPTION DATE ISSUED - THE QUEENSLAND DEVELOPER CODE (QDC);
- BUILDING REGULATIONS;
- CURRENT ISSUES OF AUSTRALIAN STANDARDS & MANUFACTURER'S
SPECIFICATIONS & INSTALLATION DETAILS FOR MATERIALS USED.
DIMENSIONS ARE SUBJECT TO SITE MEASUREMENT & VERIFICATION.
DO NOT SCALE OFF THIS DRAWING. PLANS COPYRIGHT MATT BRADLEY DESIGNS PTY LTD
REAL PROPERTY DESCRIPTION: WD-01 COVER PAGE PROJECT ADDRESS
- PROPERTY ADDRESS: 163 UPPER PINBARREN CREEK ROAD, PINBARREN, QLD 4568 WD-02 CONSTRUCTION LEGEND 163 UPPER PINBARREN CREEK ROAD,
- LOT PLAN: 58SP281564
- SITE AREA: 286,128sq.m.
WD-03 LOCALITY PLAN PINBARREN, QLD 4568
WD-04 SITE PLAN DRAW ING TITLE
WD-05 EXISTING / DEMO POST SETOUT COVER PAGE
WD-06 EXISTING / DEMO FIRST FLOOR
EXISTING HOME AREAS NEW HOME AREAS WD-07 EXISTING / DEMO ROOF PLAN
VERANDAH: 44.3m² VERANDAH: 44.3m² WD-08 NEW POST / SLAB SETOUT PLAN CLIENT
PHILLIP O'MALLEY
GROUND LEVEL: 93.9m² GROUND LEVEL: 93.9m² WD-09 NEW FIRST FLOOR DRAW N
WD-10 NEW ROOF PLAN EB
SCALE
TOTAL: 138.2m² TOTAL: 138.2m² WD-11 ELEVATIONS As indicated@ A3
DATE
MEASURED TO OUTSIDE FACE OF WALL MEASURED TO OUTSIDE FACE OF WALL WD-12 ELECTRICAL PLAN 2021-11-19
PROJECT NO.
2021136
WD-01
DRAW ING NO.
rev:
QBCC LICENCE: 15025395
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalSearchable page text hides email addresses. Original files are unchanged and may show email addresses.
Full text of the other 11 pages
Page 2
STANDARD SPECIFICATIONS SHEET
BE ADVISED : SOME CLAUSES IN THIS SPECIFICATION MAY NOT BE RELEVANT TO THIS PROJECT. CHECK AGAINST BUILDER SPECIFICATIONS AND ENGINEERING DRAWINGS & SPECIFICATIONS.
REVISION
- WHERE NECESSARY REINFORCE BELOW AND OVER OPENINGS WITH GALVANISED WOVEN WIRE - PROVIDE 100mm COMPACTED LIMESTONE BASE TO DRIVEWAY TOPPED WITH 50mm CLEAN SAND
GENERAL SYMBOLS LEGEND
No. DATE DESCRIPTION ISS. BY
FABRIC 75mm WIDE IN CENTRE OF EACH LEAF OPENING EXTENDING ALUMINIUM OF 600mm BEYOND AND GRADE TO FALLS.
THE OPENING. - UNLESS NOTED PAVING PATTERN IS TO CLIENTS DETAIL.
- UNLESS OTHERWISE SHOWN ON DRAWINGS EXTERNAL FACE WORK: 230x110x76mm WINDOW SILLS: - BRICK PAVERS SHALL BE:
SYMBOL DESCRIPTION SYMBOL DESCRIPTION 2c FACE BRICK SPLAYED SILLS. TRAFFICABLE AREAS: MIN. 65mm SOLID CLAY OR CONCRETE
PEDESTRIAN AREAS: MIN. 43mm SOLID CLAY OR CONCRETE
HC EXTERNAL HOSECOCK FW FLOOR WASTE 6.0 LINTELS
GAS GAS CONNECTION SK KITCHEN SINK MAX SPAN LINTELS SIZE BEARING EACH END
16.0 ENERGY EFFICIENCY
- INSULATION MUST FORM A CONTINUOUS BARRIER WITH CEILINGS, WALLS AND FLOORS BY
HW HOT WATER CONNECTION VB VANITY BASIN (mm) (VERT x HORIZ x THICK) (mm) ABUTTING OR OVERLAPPING ADJOINING INSULATION.
- INSULATION MUST NOT ADVERSELY AFFECT DOMESTIC SERVICES OR FITTINGS.
CW COLD WATER CONNECTION WC WC WASTE 900 75x10 150 - REFLECTIVE INSULATION IS TO BE PROVIDED WITH A MINIMUM 25mm AIRSPACE AND IS FITTED
1200 75x75x8 150
HC HOUSE CONNECTION LT LAUNDRY TUB 1500 90x90x8 150
CLOSE TO OPENINGS SUCH AS WINDOWS/DOORS ETC. AND IS PROVIDED WITH ADEQUATE SUPPORT.
- BULK INSULATION MUST MAINTAIN ITS POSITION, THICKNESS. ENSURE THAT CEILING INSULATION
IO INSPECTION OPENING STK PLUMBING STACK TO 1800 100x75x8 230 OVERLAPS UN-INSULATED WALLS.
2100 125x75x8 230 - CONSTRUCTION JOINTS, SUCH AS BETWEEN WALL AND FLOOR, ARE TO BE TIGHT FITTING OR
ORG OVERFLOW RELIEF GULLY FLOOR ABOVE / BELOW 2400 125x75x10 230 SEALED USING CAULKING OR JOINERY ITEMS SUCH AS SKIRTING OR CORNICES.
2500 100x100x8 230 - EXHAUST FANS ARE TO BE FITTED WITH A SELF CLOSING DAMPER.
YG YARD GULLY SH SHOWER 3000 150x90x10 230 - ROOF LIGHTS MUST BE SEALED WITH WEATHERPROOF SEALS.
DP DOWNPIPE LOCATION BA BATH - HEATED WATER PIPING MUST BE THERMALLY INSULATED AND PROTECTED AGAINST THE WEATHER
AND SUN.
7.0 CARPENTRY WORK - INTERNAL HEATED WATER PIPING TO HAVE AN R VALUE OF 0.2
- ENCLOSED ROOF SPACE TO HAVE AN R VALUE OF R3.5
1.0 GENERAL - ROOF AND CEILING FRAMING SHOULD COMPLY WITH AS 1684 LIGHT TIMBER FRAMING CODE. DRAW
- ALL DIMENSIONS SHALL BE CHECKED ON SITE PRIOR TO COMMENCEMENT OF ANY WORK STRAP FIRMLY OVER WALL PLATES AND SECURELY FIX TO TOP OF PLATE BY 2x30mm GALV.
- ALL MATERIALS SHALL COMPLY WITH RELEVANT CURRENT AUSTRALIAN STANDARDS AND CLOUTS/STRAP.
UNLESS OTHERWISE STATED ON THE PLANS SHALL BE NEW AND THE BEST OF THE THEIR
RESPECTIVE KIND AND SUITABLE FOR THEIR INTENDED PURPOSES. - REFER TO AS 1684 FOR ROOF FRAMING SIZES UNLESS SPECIFIED ON DRAWINGS. SUBTERRANEAN TERMITES:
- ALL WORKMANSHIP SHALL COMPLY WITH RELEVANT CURRENT AUSTRALIAN STANDARDS AND TO
GOOD TRADE PRACTICES - SUPPLY AND FIX ALL BULKHEADS & FALSE CEILINGS AS SHOWN ON THE DRAWINGS. SUBTERRANEAN TERMITE PROTECTION TO BE IN
- ALL WORK SHALL BE IN ACCORDANCE WITH REQUIREMENTS OF THE RESPECTIVE AUTHORITY
HAVING JURISDICTION OVER THE WORKS. 8.0 ROOFING ACCORDANCE WITH AS 3660. KORDON PHYSICAL
- THE ARCHITECTURAL DRAWINGS SHOULD BE READ IN CONJUNCTION WITH THE SPECIFICATION, - SELECTED ROOFING MATERIAL SHALL BE INSTALLED AND FIXED IN ACCORDANCE WITH TERMITE BARRIER TO PERIMETER AND ALL SLAB
MANUFACTURERS SPECIFICATION AND RELEVANT BUILDING CODES.
SCHEDULES AND CONSULTANTS DRAWINGS THAT FORM PART OF THE CONSTRUCTION DOCUMENTS
- GUTTER, FASCIA, DOWNPIPES, FLASHING SHALL BE IN LONGEST POSSIBLE LENGTHS.
PROTRUSIONS / PENETRATIONS. 80MM MIN
REFERRED TO IN THE "BUILDING CONTRACT".
- DO NOT SCALE FROM DRAWINGS. NOTIFY OF ANY ERRORS OR OMISSIONS BEFORE PROCEEDING - ALLOW FOR ALL JOINTS AND JOINING MATERIALS, COLLARS, STRAPS & FASTENINGS NECESSARY TO EXPOSED SLAB FACE TO PERIMETER TO ACT AS
WITH ANY WORKS COMPLETE WORK. VISUAL DETECTION SYSTEM AGAINST TERMITE
- ENSURE THAT SUBSTRATES ARE SUITABLE FOR THE INTENDED SUBSEQUENT FINISHES. - ALLOW FOR ALL ROOF PENETRATIONS, ROOF COWLS, FLASHING, FLUMES THROUGH ROOF.
- FIX GUTTERS & FLASHING TO PERMIT THERMAL MOVEMENT IN THEIR FULL LENGTH.
INFESTATION AS PER AS3660 AND ALL RELATED
COMMENCEMENT OF WORK ON THE SUBSTRATES IMPLIES ACCEPTANCE BY THE SUBCONTRACTOR OF
THE SUBSTRATES ON WHICH FINISHES ARE APPLIED. - SEAL BETWEEN OVERLAPPING FLASHING; FLASHING TURNED DOWN OVER BASE OR APRON CODES. ANY OTHER SYSTEM USED MUST BE A
- CONTRACTOR IS TO SUPPLY ALL EQUIPMENT NECESSARY FOR THE COMPLETION OF THE RESPECTIVE FLASHING; FLASHING OVER METAL ROOF; FLASHING OVER SECRET GUTTERS; AROUND ROOF CERTIFIED SYSTEM TO BCA REQUIREMENTS.
WORKS. PENETRATIONS ETC.
- CONTRACTOR IS RESPONSIBLE FOR THE PROGRESSIVE CLEAN UP DURING AND AFTER THE
COMPLETION OF RESPECTIVE WORKS. 9.0 WINDOWS/GLAZING
- UNLESS OTHERWISE STATED ON THE DRAWINGS WINDOW FRAMES SHALL BE ALUMINIUM
2.0 EARTHWORKS RESIDENTIAL OR COMMERCIAL IN SECTION WITH POWDERCOAT FINISH AS SELECTED BY OWNER. NEW CONSTRUCTION
- UNLESS OTHERWISE STATED, REMOVE TOPSOIL TO A MINIMUM DEPTH OF 200mm INCLUDING ALL - ALLOW FOR FLYSCREENS TO BE FITTED TO ALL WINDOWS.
ROOTS, AND OTHER MATTER, AND REQUIRED BY THE SOIL CONDITION AND/OR BUILDER. PROVIDE - ANGLED WINDOW UNITS SHALL BE FACTORY MADE AND FIXED AND DELIVERED ON SITE AS A
SUITABLE CLEAN FILL AND COMPACT IN LAYERS NOT GREATER THAN 300mm TO REDUCE LEVELS AS COMPLETE UNIT. - FOR HABITABLE ROOMS:
SHOWN. - WHERE RELEVANT WINDOWS ARE TO COMPLY WITH THE SPECIFICATIONS PROVIDED BY THE - TOTAL R VALUE MUST BE 2.8
- DO NOT EXCAVATE SERVICES TRENCHES WITHIN AN ANGLE OF 45 DEGREES DOWN FROM THE THERMAL PERFORMANCE ASSESSOR.
BOTTOM EDGE OF THE FOOTING. - CLEAR GLASS GENERALLY: OBSCURE GLASS TO BATHROOMS, REFER TO DRAWINGS.
- ALL RETAINING WALLS TO BE TREATED WITH "BITKOTE" WATERPROOFING AGENT. - WHERE GLASS BLOCKS HAVE BEEN NOMINATED, THEY SHALL BE IN FRAMES AND INSTALLED TO
MANUFACTURERS SPECIFICATIONS
3.0 CONCRETE
- ALL CONCRETE REINFORCEMENT AND FORMWORK SHALL BE TO STRUCTURAL ENGINEERS DETAILS, 10.0 JOINERY
RELEVANT BUILDING CODES AND STANDARDS. - ALL JOINERY SHALL BE OF HIGHEST QUALITY MATERIALS TO BEST TRADE PRACTICES AND HIGH
- THE FOOTING AND SLAB CONSTRUCTION IS TO COMPLY WITH AS 2870. QUALITY FINISH.
- PROVIDE A PROPRIETARY VAPOUR BARRIER WHICH CONSISTS OF HIGH IMPACT RESISTANT - EXTERNAL DOOR FRAMES SHALL BE: 110x40 DOUBLE REBATED FRAME WITH 130x40 WEATHERED
POLYTHENE FILM MIN 0.2mm THICK WHICH HAS BEEN PIGMENTED AND BRANDED BY THE THRESHOLD U.N.O.
.
MANUFACTURER. - SUPPLY AND BUILD IN TIMBER DOOR FRAMES TO EXTERNAL LOCATIONS AS SHOWN ON
A
ARCHITECTURAL DRAWINGS.
D.
4.0 TERMITE PROTECTION
11.0 CEILINGS
R
- PROVIDE ANTI-TERMITE TREATMENT UNDER THE BUILDING AREAS IN ACCORDANCE WITH AS 2057, AS
- CEILINGS SHALL BE RECESSED EDGE, MINIMUM 8.0mm PLASTERGLASS OR GYPROCK.
O
3660.1 AND APPENDIX D, FOR RETICULATED SYSTEMS.
F T I ON
- BUILDER SHALL PROVIDE "BIFLEX" OR SIMILAR APPROVED ANTI-TERMITE TREATMENT IN ACCORDANCE - FLUSH JOINTS, SCREW HEADS, AND OTHER BLEMISHES IN THE SHEETS USING APPROVED SYSTEMS
E
WITH RELEVANT AUSTRALIAN STANDARD CODES. TO PROVIDE FLUSH SMOOTH CONTINUOUS SURFACE.
U
- PROVIDE AND FIX ALL FLUSH STOP BEADS & CASING BEADS TO ALL CORNERS & EDGES.
I S S T F O R CO
5.0 BRICKWORK - PROVIDE ALL SELECTED MOLDINGS AND CORNICES TO ALL CEILINGS AS SHOWN ON THE
TRUC
- BRICK WORK SHALL COMPLY WITH : AS A123 MASONRY CODE & AS 3700 MASONRY CODE. DRAWINGS.
- BRICK GAUGE 7 STANDARD COURSES = 600 m m . MORTAR FOR MASONRY CONSTRUCTION
- TIES SHALL BE 3.5mm DIAMETER GALVANIZED WIRE KINKED FOR AND BUILT IN EVERY 5TH COURSE AT
APPROXIMATELY 900mm CENTRES, WITH ADDITIONAL TIES AT THE RATE OF 1 TIE/300mm HEIGHT OF
12.0 PLASTERING
- INTERNAL WALL FINISHES INCLUDING CUPBOARD, BIN & FRIDGE RECESSES ETC SHALL BE (OTHER
N S
OPENINGS AND VERTICAL CONTROL JOINTS AND WITHIN 150mm OF OPENINGS. BUILD TIES INTO EACH THAN FACE FINISHES OR WHERE COVERED BY FEATURE MATERIALS) FLOAT AND SET IN HARDWALL
LEAF AT LEAST 50mm.
- VERTICAL CONTROL JOINTS SHALL BE 12mm WIDE FILLED AT COMPLETION WITH A CONTINUOUS
PLASTER U.N.O.
- PLASTERED WALLS SHALL BE NOMINAL 12mm THICK CONSISTING OF 1:1:9, CEMENT:LIME:SAND NO
FILLER STRIP.
- CAVITIES TO BE KEPT CLEAR OF MORTAR. PROVIDE CAVITY BOARDS. TEMPORARILY OMIT BRICKS TO
RENDER, AND FINISHED WITH NOMINALLY 3mm HARDWALL PLASTER.
- SUPPLY AND FIX EXTERNAL CORNER BEADS TO ALL EXTERNAL CORNERS.
matt bradley designs
©MATT BRADLEY DESIGNS - ACN: 637 963 396 - ABN: 53 637 963 396
PERMIT RAKING OUT OF CAVITY BOTTOMS. - PROVIDE STOP BEADS WHERE PLASTER WORK ABUTS TIMBER FRAMES, OR FACEWORK. www.mattbradleydesigns.com.au - [email protected] - 0488 554 020
- FORM WEEP HOLES EVERY FOURTH PERPEND ABOVE FLASHING AND CAVITY FILL KEEP CLEAR OF - EXTERNAL RENDER WHEN APPLICABLE SHALL BE 2 COAT SAND FINISH. (FOR PAINTING). ALL DESIGN, CONSTRUCTION METHODS & MATERIALS TO BE IN ACCORDANCE WITH:
- THE BUILDING CODE OF AUSTRALIA (BCA);
MORTAR. DO NOT LOCATE WEEPHOLES CLOSER THAN 500mm TO JOINTS IN DAMP PROOF COURSES - NIBS IN INTERNAL CORNERS ADJACENT TO DOOR FRAMES GREATER THAN 40mm SHALL NOT BE - THE QUEENSLAND DEVELOPER CODE (QDC);
- BUILDING REGULATIONS;
OR FLASHING. FLUSHED UP WITH FRAMES. - CURRENT ISSUES OF AUSTRALIAN STANDARDS & MANUFACTURER'S
SPECIFICATIONS & INSTALLATION DETAILS FOR MATERIALS USED.
- PROVIDE DAMP PROOF COURSES (DPC) IN THE BOTTOM 3 COURSES OF BRICK WORK AND SLAB - PROVIDE V-JOINTS IN RENDER & FINISHING PLASTER WHERE BRICK WORK ABUTS OR JOINS ONTO DIMENSIONS ARE SUBJECT TO SITE MEASUREMENT & VERIFICATION.
AND/OR FOOTINGS. DPC ADDITIVE SHALL BE CLEAR IN ALL FACEWORK. CONCRETE WORK. DO NOT SCALE OFF THIS DRAWING. PLANS COPYRIGHT MATT BRADLEY DESIGNS PTY LTD
- SETOUT BRICKWORK ACCURATELY, PLUMP, LEVEL AND PROPERLY BONDED. RISING WORK TO BE PROJECT ADDRESS
13.0 FLOORING FINISHES
RAKED BACK, JAMBS, REVEALS, CORNERS, PERPENDS, ETC TO BE TRUE, PLUMB AND IN LINE WITH
PERPENDS TRUE LINE. SETOUT DOOR FRAMES NEAR PERPENDICULAR WALL WITH A MERGIN OF 12mm - CARPET FLOOR COVERINGS TO NOMINATED AREAS COMPLETE WITH SELECTED UNDERLAY 163 UPPER PINBARREN CREEK ROAD,
OR GREATER THAN 50mm SMOOTH EDGE, DIMINISHING STRIPS ETC, TO COMPLETE THE WORKS: REFER TO DRAWINGS AND PINBARREN, QLD 4568
- PROVIDE 12mm PLASTERING MARGIN BETWEEN WINDOW FRAME AND INTERNAL BRICKWORK TO BE FINISHES SCHEDULE. DRAW ING TITLE
PLASTERED. - PROVIDE TILED FLOOR FINISHES TO NOMINATED AREAS COMPLETE WITH ALL MATERIALS, ANGLE
- WHERE NECESSARY REINFORCE BELOW AND OVER OPENINGS WITH GALVANISED WOVEN WIRE
FABRIC 75mm WIDE IN CENTRE OF EACH LEAF OPENING EXTENDING ALUMINIUM OF 600mm BEYOND
TRIMS ETC. TO COMPLETE THE WORKS: REFER TO DRAWINGS AND FINISHES SCHEDULE.
- PROVIDE TIMBER FLOOR FINISHES TO NOMINATED AREAS COMPLETE WITH ALL MATERIALS,
CONSTRUCTION LEGEND
THE OPENING. DIMINISHING BOARDS ETC TO COMPLETE THE WORKS: FLOOR BOARDS TO BE SANDED AND
POLISHED TO HIGH STANDARD WITH PREMIUM QUALITY SEALER (2 COATS). REFER TO DRAWINGS
BUILD IN ALCOR/PGI FLASHINGS AS FOLLOWS: AND FINISHES SCHEDULE.
CLIENT
- WHEREVER SHOWN ON DRAWINGS.
- CAVITY WALLS BUILT OF SLAB ON GROUND (WHERE NOT PARGED). 14.0 SIGNAGE
PHILLIP O'MALLEY
- OVER LINTELS TO EXPOSED OPENINGS - EXTEND THE FULL WIDTH OF OUTER LEAF CONTINUOUS - WHERE NECESSARY SUPPLY & FIX SELECTED UNIT AND HOUSE NUMBERS TO EACH UNIT AND TO DRAW N
ACROSS CAVITY 50mm INTO INNER LEAF 2c ABOVE. LETTERBOXES AS SCHEDULED. EB
SCALE
- OVER ROOF - EXTEND THE FULL WIDTH OF EXTERNAL LEAF, STEPPED TO ROOF SLOPE TURNED
DOWN MIN. 50mm OVER BASE FLASHING. TURN UP IN CAVITY SLOPING INWARDS AND BUILT INTO 15.0 PAVING 1 : 100 @ A3
INNER LEAF 1c ABOVE. - GENERALLY: WHEN PAVING IS INCLUDED IN THE BUILDING CONTRACT THE FOLLOWING SHALL DATE
- DOOR/WINDOW STILES - EXTEND THE FULL HEIGHT 150mm WIDE FIXED TO FRAMES INTERLEAVED APPLY AS A MINIMUM STANDARD. 2021-11-19
WITH SILL AND HEAD FLASHING AT EACH END. ꞏ SUPPLY AND LAY ALL PAVING TO EXTERNAL AREAS AS SHOWN ON WORKING DRAWINGS. PROJECT NO.
- STRUCTURE OR SERVICES WITHIN 30mm OF OUTER BRICK LEAF IN CAVITY: VERTICAL FLASHING ꞏ CUT, FILL & COMPACT SAND TO REQUIRED LEVELS. SCREED TO UNIFORM THINNESS AND LEVELS 2021136
CONTINUOUS 1c BELOW FL TO ABOVE STRUCTURE OR FRAME. NOMINAL 300m WIDE. ꞏ PROVIDE BRICK EDGE RETAINING FOOTING EMBEDDED IN MORTAR BENEATH THE PAVING BRICK
WD-02
DRAW ING NO.
- FOR HORIZONTAL STRUCTURES/SERVICES: CONTINUOUS FLASHING BUILT IN AS FOR OVER LINTELS. ꞏ TO DRIVEWAY AREAS, PROVIDE NOMINAL 300x150mm CONCRETE FOOTING ALONG PERIMETER OF rev:
- AT CAVITY WALLS WITH GLASS BLOCK 300mm WIDE FIXED TO GLASS BLOCK FRAME AND TURNED DRIVEWAY AND BED EDGE BRICK IN MORTAR.
AWAY IN CAVITY FROM INNER LEAF. QBCC LICENCE: 15025395
Page 3
NORTH
SITE NOTES: REVISION
No. DATE DESCRIPTION ISS. BY
ꞏ CONFIRM ALL DIMENSIONS ON SITE TO
EXISTING RESIDENCE PRIOR TO
COMMENCEMENT OF ANY WORK. PROPOSED BUILDING (CARETAKERS
ꞏ ALL BUILDING WORK TO BE CARRIED (HOUSE RELOCATION)
OUT IN ACCORDANCE WITH A.S.1684
AND THE B.C.A. AND ALL OTHER
RELEVANT CODES AND STANDARDS.
ꞏ EXISTING PLUMBING AND ELECTRICAL PROPOSED WASTE WATER
WORKS TO BE REMOVED AND MADE
GOOD AS NECESSARY.
ꞏ THIS PLAN IS TO BE READ IN
CONJUNCTION WITH LANDSCAPING
DETAIL PLANS FOR SPECIFIC PLANTING
LOCATIONS.
ꞏ THE EXACT LOCATION OF PROPOSED SHED + STORAGE
UNDERGROUND AND ABOVEGROUND
SERVICES SHALL BE PROVEN ON SITE. PR
EXISTING TRACK OP
NO GUARANTEE IS GIVEN THAT ALL E RT
EXISTING SERVICES ARE SHOWN. Y
ꞏ THIS DRAWING SET TO BE READ IN
CONJUNCTION WITH THE
SPECIFICATION PROVIDED.
ꞏ BEWARE OF EXISTING SERVICES. 217365
DAM
CONFIRM LOCATIONS PRIOR TO
EXCAVATION. TAKE EXTREME CARE. FASCIA
31
UPPER PINBARREN CREEK RD
ꞏ REFER ALL MAJOR WORKS TO RAMPS, 26
WALKWAYS, DRIVEWAYS ETC 90
(INCLUDING CARPARK WORKS, LEVELS FA
SC
& DATUMS) REFER TO CIVIL ENGINEERS IA
DOCUMENTATION.
ꞏ ALL EFFLUENT & WASTE WATER TO BE
PROPERTY BO
CONNECTED TO COUNCIL SEWERAGE
LINE AS PER COUNCIL & ESTATE DAM
REQUIREMENTS U.N.O.
ꞏ ALL ROOF RAINWATER TO BE
DIRECTED TO PROPERTY BOUNDARY
FOR DISTRIBUTION TO THE ROOF
UN
WATER HARVESTING SCHEME AS PER
REQUIREMENTS. DARY
RY
ꞏ CONTRACT DOCUMENTS AND DAM
A
ENGINEERS DRAWINGS AND
ND
SPECIFICATIONS ARE TO TAKE
OU
PRECEDENCE OVER THESE PLANS.
YB
A .
RT
.
DEMOLITION NOTES:
D
E
R
OP
O
ꞏ CAP OFF EXISTING PLUMBING AND
PR
F T I ON
ELECTRICAL WORKS AS NECESSARY BY
E
CERTIFIED TRADESPERSON.
U
DAM
I S S T F O R CO
ꞏ MODIFIED BRICKWORK TO BE
TOOTHED INTO EXISTING WHERE
APPLICABLE AND CAVITY TO REMAIN N S TRUC
CONTINUOUS AT ALL TIMES.
ꞏ EXISTING MATERIALS TO BE REUSED
TO OWNERS DETAIL. PR NO
ꞏ MATERIALS REMOVED FROM SITE
OP
E RT matt bradley designs
MUST BE DISPOSED OF AS PER COUNCIL YB ©MATT BRADLEY DESIGNS - ACN: 637 963 396 - ABN: 53 637 963 396
www.mattbradleydesigns.com.au - [email protected] - 0488 554 020
REGULATIONS. OU ALL DESIGN, CONSTRUCTION METHODS & MATERIALS TO BE IN ACCORDANCE WITH:
ND - THE BUILDING CODE OF AUSTRALIA (BCA);
- THE QUEENSLAND DEVELOPER CODE (QDC);
ꞏ INVESTIGATON SHOULD BE AR - BUILDING REGULATIONS;
Y
- CURRENT ISSUES OF AUSTRALIAN STANDARDS & MANUFACTURER'S
UNDERTAKEN BEFORE ALL WORKS THAT SPECIFICATIONS & INSTALLATION DETAILS FOR MATERIALS USED.
DIMENSIONS ARE SUBJECT TO SITE MEASUREMENT & VERIFICATION.
REQUIRES EXCAVATION
DO NOT SCALE OFF THIS DRAWING. PLANS COPYRIGHT MATT BRADLEY DESIGNS PTY LTD
PROJECT ADDRESS
163 UPPER PINBARREN CREEK ROAD,
PINBARREN, QLD 4568
DRAWING TITLE
LOCALITY PLAN
1 LOCALITY
1 : 5000
PLAN CLIENT
PHILLIP O'MALLEY
DRAWN
Author
SCALE
1 : 5000 @ A3
DATE
2021-11-19
PROJECT NO.
2021136
WD-03
DRAWING NO.
rev:
QBCC LICENCE: 15025395
Page 4
NORTH
SITE NOTES: REVISION
No. DATE DESCRIPTION ISS. BY
ꞏ CONFIRM ALL DIMENSIONS ON SITE
TO EXISTING RESIDENCE PRIOR TO
COMMENCEMENT OF ANY WORK.
ꞏ ALL BUILDING WORK TO BE
CARRIED OUT IN ACCORDANCE WITH
A.S.1684 AND THE B.C.A. AND ALL
OTHER RELEVANT CODES AND EXISTING TRACK
STANDARDS.
ꞏ EXISTING PLUMBING AND
ELECTRICAL WORKS TO BE
REMOVED AND MADE GOOD AS
NECESSARY.
ꞏ THIS PLAN IS TO BE READ IN
CONJUNCTION WITH LANDSCAPING
DETAIL PLANS FOR SPECIFIC
PLANTING LOCATIONS.
ꞏ THE EXACT LOCATION OF
UNDERGROUND AND ABOVEGROUND
SERVICES SHALL BE PROVEN ON
SITE. NO GUARANTEE IS GIVEN THAT
ALL EXISTING SERVICES ARE
SHOWN.
ꞏ THIS DRAWING SET TO BE READ IN
CONJUNCTION WITH THE
SPECIFICATION PROVIDED.
ꞏ BEWARE OF EXISTING SERVICES.
CONFIRM LOCATIONS PRIOR TO
EXCAVATION. TAKE EXTREME CARE.
ꞏ REFER ALL MAJOR WORKS TO
RAMPS, WALKWAYS, DRIVEWAYS WD-11
ETC (INCLUDING CARPARK WORKS,
LEVELS & DATUMS) REFER TO CIVIL
ENGINEERS DOCUMENTATION. 3
ꞏ ALL EFFLUENT & WASTE WATER TO
BE CONNECTED TO COUNCIL
SEWERAGE LINE AS PER COUNCIL &
ESTATE REQUIREMENTS U.N.O.
ꞏ ALL ROOF RAINWATER TO BE
DIRECTED TO PROPERTY BOUNDARY
FOR DISTRIBUTION TO THE ROOF
WATER HARVESTING SCHEME AS
PER REQUIREMENTS.
ꞏ CONTRACT DOCUMENTS AND
.
ENGINEERS DRAWINGS AND
. A
SPECIFICATIONS ARE TO TAKE
D
PRECEDENCE OVER THESE PLANS.
O R
4 WD-11
DEMOLITION NOTES:
ꞏ CAP OFF EXISTING PLUMBING AND PROPOSED
U E F T I ON
I S S T F O R CO
12000
CARETAKERS TRUC
ELECTRICAL WORKS AS NECESSARY
BY CERTIFIED TRADESPERSON.
ꞏ MODIFIED BRICKWORK TO BE
WD-11 2
RESIDENCE
PROPOSED
SHED N S
TOOTHED INTO EXISTING WHERE STORAGE
APPLICABLE AND CAVITY TO REMAIN
CONTINUOUS AT ALL TIMES.
(HOUSE RELOCATION)
20m x 6m NO
ꞏ EXISTING MATERIALS TO BE matt bradley designs
REUSED TO OWNERS DETAIL. ©MATT BRADLEY DESIGNS - ACN: 637 963 396 - ABN: 53 637 963 396
www.mattbradleydesigns.com.au - [email protected] - 0488 554 020
ꞏ MATERIALS REMOVED FROM SITE ALL DESIGN, CONSTRUCTION METHODS & MATERIALS TO BE IN ACCORDANCE WITH:
- THE BUILDING CODE OF AUSTRALIA (BCA);
- THE QUEENSLAND DEVELOPER CODE (QDC);
MUST BE DISPOSED OF AS PER - BUILDING REGULATIONS;
- CURRENT ISSUES OF AUSTRALIAN STANDARDS & MANUFACTURER'S
SPECIFICATIONS & INSTALLATION DETAILS FOR MATERIALS USED.
COUNCIL REGULATIONS. DIMENSIONS ARE SUBJECT TO SITE MEASUREMENT & VERIFICATION.
DO NOT SCALE OFF THIS DRAWING. PLANS COPYRIGHT MATT BRADLEY DESIGNS PTY LTD
ꞏ INVESTIGATON SHOULD BE PROJECT ADDRESS
UNDERTAKEN BEFORE ALL WORKS
THAT REQUIRES EXCAVATION.
163 UPPER PINBARREN CREEK ROAD,
PINBARREN, QLD 4568
DRAWING TITLE
SITE PLAN
1
CLIENT
WD-11 PHILLIP O'MALLEY
DRAWN
EB
SCALE
1 : 200 @ A3
DATE
2021-11-19
PROJECT NO.
2021136
0 1 2 4 6 8 10 20m
2 SITE
1 : 200
PLAN DRAWING NO.
WD-04 rev:
QBCC LICENCE: 15025395
SCALE = 1:200
Page 5
REVISION
NOTES: No. DATE DESCRIPTION ISS. BY
75 1750 75 7860 75 1750 75
BUILDER TO VERIFY ALL DIMENSIONS
PRIOR TO ORDERING ANY MATERIALS
75 2650 75 2120 75 1350 75 3340 75 1750 75
DEMOLITION LEGEND
SYMBOL DESCRIPTION
75 975 75 1990 75 225 75
DEMOLISHED WALL
DEMOLISHED TIMBER FLOOR/SUBFLOOR
DEMOLISHED 300 X 300 TILE
75 1160 75
DEMOLISHED 600 X 600 TILE
DEMOLISHED TILE ROOF
DEMOLISHED SHEET METAL ROOF
2000
120 x 100 H/W BEARER
100
75
2080
1770
75
75
1700
75
JOISTS @ 500
100 x 50 H/W
CENTERS
1750
HOUSE
ABOVE
75
1650
VERANDAH VERANDAH
ABOVE ABOVE
A .
100 x 75 H/W BEARER (TYPICAL)
.
75
O R D
F T I ON
1800
U E
I S S T F O R CO TRUC
75
N S
1770
NO
matt bradley designs
75
©MATT BRADLEY DESIGNS - ACN: 637 963 396 - ABN: 53 637 963 396
www.mattbradleydesigns.com.au - [email protected] - 0488 554 020
ALL DESIGN, CONSTRUCTION METHODS & MATERIALS TO BE IN ACCORDANCE WITH:
- THE BUILDING CODE OF AUSTRALIA (BCA);
- THE QUEENSLAND DEVELOPER CODE (QDC);
- BUILDING REGULATIONS;
- CURRENT ISSUES OF AUSTRALIAN STANDARDS & MANUFACTURER'S
SPECIFICATIONS & INSTALLATION DETAILS FOR MATERIALS USED.
DIMENSIONS ARE SUBJECT TO SITE MEASUREMENT & VERIFICATION.
DO NOT SCALE OFF THIS DRAWING. PLANS COPYRIGHT MATT BRADLEY DESIGNS PTY LTD
200 x 200 CONC. POSTS
PROJECT ADDRESS
163 UPPER PINBARREN CREEK ROAD,
PINBARREN, QLD 4568
DRAWING TITLE
EXISTING / DEMO POST
SETOUT
CLIENT
PHILLIP O'MALLEY
DRAWN
EB
SCALE
1 : 100 @ A3
DATE
2021-11-19
PROJECT NO.
2021136
1 EXISTING / DEMO POST SETOUT
0 0.5 1 2 3 4 5 10m
WD-05
DRAWING NO.
rev:
1 : 100
QBCC LICENCE: 15025395
SCALE = 1:100
Page 6
REVISION
NOTES: No. DATE DESCRIPTION ISS. BY
BUILDER TO VERIFY ALL DIMENSIONS 11630
PRIOR TO ORDERING ANY MATERIALS
APPROX. WIDTH
6400 3135 275 1820
DEMOLITION LEGEND
SYMBOL DESCRIPTION
1820 7990 1820
DEMOLISHED WALL
DEMOLISHED TIMBER FLOOR/SUBFLOOR
DEMOLISHED 300 X 300 TILE
DEMOLISHED 600 X 600 TILE
DEMOLISHED TILE ROOF
1230
1230
DEMOLISHED SHEET METAL ROOF
2440
2440
6360
KITCHE
RAKED
CEILIN
SITTING
2690
2880
BATH
RAKED
CEILIN
APPROX. LENGTH
14620
LIVIN BED
6430
6240
A .
RAKED RAKED
.
8260
CEILIN CEILIN
BED BED
O R D
F T I ON
U E
I S S T F O R CON S TRUC
NO
1830
1830
RAKED
CEILIN
VERANDA
matt bradley designs
©MATT BRADLEY DESIGNS - ACN: 637 963 396 - ABN: 53 637 963 396
www.mattbradleydesigns.com.au - [email protected] - 0488 554 020
ALL DESIGN, CONSTRUCTION METHODS & MATERIALS TO BE IN ACCORDANCE WITH:
- THE BUILDING CODE OF AUSTRALIA (BCA);
- THE QUEENSLAND DEVELOPER CODE (QDC);
- BUILDING REGULATIONS;
- CURRENT ISSUES OF AUSTRALIAN STANDARDS & MANUFACTURER'S
SPECIFICATIONS & INSTALLATION DETAILS FOR MATERIALS USED.
DIMENSIONS ARE SUBJECT TO SITE MEASUREMENT & VERIFICATION.
DO NOT SCALE OFF THIS DRAWING. PLANS COPYRIGHT MATT BRADLEY DESIGNS PTY LTD
PROJECT ADDRESS
163 UPPER PINBARREN CREEK ROAD,
PINBARREN, QLD 4568
DRAW ING TITLE
EXISTING / DEMO FIRST
FLOOR
CLIENT
PHILLIP O'MALLEY
DRAW N
EB
SCALE
1 : 100 @ A3
DATE
2021-11-19
PROJECT NO.
2021136
1 EXISTING / DEMO FIRST FLOOR
0 0.5 1 2 3 4 5 10m
WD-06
DRAW ING NO.
rev:
1 : 100
QBCC LICENCE: 15025395
SCALE = 1:100
Page 7
REVISION
NOTES: No. DATE DESCRIPTION ISS. BY
BUILDER TO VERIFY ALL DIMENSIONS
PRIOR TO ORDERING ANY MATERIALS 11630
APPROX. WIDTH
DEMOLITION LEGEND
1820 4580 3410 1820
SYMBOL DESCRIPTION
DEMOLISHED WALL
DEMOLISHED TIMBER FLOOR/SUBFLOOR 2560
DEMOLISHED 300 X 300 TILE
DEMOLISHED 600 X 600 TILE
DEMOLISHED TILE ROOF
DEMOLISHED SHEET METAL ROOF
1430
10 °
30 °
4240
30 °
APPROX. LENGTH
14820
30 °
.
30 ° EXISTING SHEET 30 °
7320
. A
METAL ROOF
O R D
F T I ON
U E
I S S T F O R CO TRUC
30 °
N S
NO
matt bradley designs
©MATT BRADLEY DESIGNS - ACN: 637 963 396 - ABN: 53 637 963 396
www.mattbradleydesigns.com.au - [email protected] - 0488 554 020
1830
ALL DESIGN, CONSTRUCTION METHODS & MATERIALS TO BE IN ACCORDANCE WITH:
- THE BUILDING CODE OF AUSTRALIA (BCA);
EXISTING BULLNOSE SHEET METAL ROOF - THE QUEENSLAND DEVELOPER CODE (QDC);
- BUILDING REGULATIONS;
- CURRENT ISSUES OF AUSTRALIAN STANDARDS & MANUFACTURER'S
SPECIFICATIONS & INSTALLATION DETAILS FOR MATERIALS USED.
DIMENSIONS ARE SUBJECT TO SITE MEASUREMENT & VERIFICATION.
DO NOT SCALE OFF THIS DRAWING. PLANS COPYRIGHT MATT BRADLEY DESIGNS PTY LTD
PROJECT ADDRESS
163 UPPER PINBARREN CREEK ROAD,
PINBARREN, QLD 4568
DRAW ING TITLE
EXISTING / DEMO ROOF PLAN
CLIENT
PHILLIP O'MALLEY
DRAW N
EB
SCALE
1 : 100 @ A3
DATE
2021-11-19
PROJECT NO.
2021136
1 EXISTING / DEMO ROOF PLAN
0 0.5 1 2 3 4 5 10m
WD-07
DRAW ING NO.
rev:
1 : 100
QBCC LICENCE: 15025395
SCALE = 1:100
Page 8
NOTES:
- POSTS TBC BY
ENGINEER
NORTH
NOTES: REVISION
LICENSED PLUMBER TO VERIFY DOWNPIPE No. DATE DESCRIPTION ISS. BY
NUMBERS AND POSITIONS PRIOR TO
CONSTRUCTION OR ORDERING
PLATFORM IMMEDIATELY SURROUNDING
DWELLING TO FALL AWAY AT A SLOPE OF 1 IN 20.
SURFACE DRAINAGE TO DISCHARGE EVENLY
WITHOUT NUISANCE TO ADJOINING PROPERTIES
SITE TO BE SCRAPED CLEAN OF VEGETATION TO LANDING ABOVE
BUILDING AREA
ALL LEVELS SHOWN ARE INDICATIVE ONLY AND
ARE TO BE CONFIRMED ON SITE. NO
RESPONSIBILITY TAKEN FOR ANY LEVELS SHOWN.
SURVEYORS PLANS TO TAKE PRECEDENCE OVER
ANY LEVELS SHOWN ON THESE DOCUMENTS
PLUMBER TO DESIGN GROUNDWATER DRAINAGE
SYSTEM. ONE (1) YARD GULLY STANDARD
NOTE: ENGINEERS DETAILS, DRAWINGS &
SPECIFICATIONS TO TAKE PRECEDENCE OVER
THESE DRAWINGS
BUILDER TO VERIFY ALL DIMENSIONS PRIOR TO
ORDERING ANY MATERIALS
SEAL ALL WET AREAS IN ACCORDANCE WITH AS
3740 & BCA REQUIREMENTS
PLUMBER RESPONSIBLE TO LOCATE AND CONFIRM
SEWER HOUSE CONNECTION LOCATION
ACCURATELY PRIOR TO COMMENCEMENT.
PLUMBER IS TO VERIFY WITH SITE SUPERVISOR
PRIOR TO SETTING OUT FIXTURE DRAINAGE
POINTS. NO AMENDMENTS OR SPECIAL FIXTURES
HAVE BEEN NOMINATED
HOUSE
REFER TO SPECIFICATION FOR ALL CONCRETE ABOVE
SLAB FINISHES
WHERE SERVICES / PIPEWORK ARE LOCATED
VERANDAH VERANDAH
.
UNDER DRIVEWAYS AND SLABS CONTRACTORS
ABOVE ABOVE
. A
ARE TO ENSURE ADEQUATE COMPACTION TO
D
TRENCH BACKFILL ACHIEVED TO SUPPORT
R
CONCRETE
REBATE GARAGE DOORS & SLIDING GLASS DOORS
U E O
F T I ON
I S S T F O R CO
20mm, AND SHOWER RECESSES 40mm IN
LOCATIONS SHOWN ACCORDING TO MANUF' SPEC.
OR BUILDERS DIRECTIONS N S TRUC
DEVELOPMENT SEWER CONNECTION DETAILS NO
AND INFORMATION WAS UNAVAILABLE AT THE
TIME OF WORKING DRAWINGS PREPARATION.
matt bradley designs
©MATT BRADLEY DESIGNS - ACN: 637 963 396 - ABN: 53 637 963 396
PLUMBER IS RESPONSIBLE TO DETERMINE
www.mattbradleydesigns.com.au - [email protected] - 0488 554 020
ALL DESIGN, CONSTRUCTION METHODS & MATERIALS TO BE IN ACCORDANCE WITH:
CONNECTION INFORMATION FROM - THE BUILDING CODE OF AUSTRALIA (BCA);
- THE QUEENSLAND DEVELOPER CODE (QDC);
- BUILDING REGULATIONS;
DEVELOPER AND TO COMPLY WITH ALL - CURRENT ISSUES OF AUSTRALIAN STANDARDS & MANUFACTURER'S
SPECIFICATIONS & INSTALLATION DETAILS FOR MATERIALS USED.
RELEVANT DETAILS AND REQUIREMENTS DIMENSIONS ARE SUBJECT TO SITE MEASUREMENT & VERIFICATION.
DO NOT SCALE OFF THIS DRAWING. PLANS COPYRIGHT MATT BRADLEY DESIGNS PTY LTD
PROJECT ADDRESS
163 UPPER PINBARREN CREEK ROAD,
PINBARREN, QLD 4568
SUBTERRANEAN TERMITES: DRAW ING TITLE
SUBTERRANEAN TERMITE PROTECTION TO BE IN NEW POST / SLAB SETOUT
ACCORDANCE WITH AS 3660. KORDON PHYSICAL
TERMITE BARRIER TO PERIMETER AND ALL SLAB
PLAN
PROTRUSIONS / PENETRATIONS. 80MM MIN CLIENT
PHILLIP O'MALLEY
EXPOSED SLAB FACE TO PERIMETER TO ACT AS DRAW N
VISUAL DETECTION SYSTEM AGAINST TERMITE EB
INFESTATION AS PER AS3660 AND ALL RELATED SCALE
1 : 100 @ A3
CODES. ANY OTHER SYSTEM USED MUST BE A DATE
CERTIFIED SYSTEM TO BCA REQUIREMENTS. 2021-11-19
PROJECT NO.
2021136
0 0.5 1 2 3 4 5 10m
1 NEW
1 : 100
POST SETOUT DRAW ING NO.
WD-08 rev:
QBCC LICENCE: 15025395
SCALE = 1:100
Page 9
NORTH
NOTES: REVISION
No. DATE DESCRIPTION ISS. BY
REFER ENGINEERS DRAWINGS
& SPECIFICATIONS FOR ALL
STRUCTURAL DETAILS,
FRAMING, BRACING, TIE DOWN
AND SLAB/FOOTING DETAILS
BUILDER TO VERIFY ALL
DIMENSIONS ON SITE PRIOR TO
ORDERING MATERIALS
W/
SEAL WET AREAS IN NEW STAIR LDR
ACCORDANCE WITH AS3740 &
BCA REQUIREMENTS 72
PROVIDE FLOOR WASTE TO ALL
WET AREAS
SMOKE ALARMS TO BE FITTED
IN ACCORDANCE WITH BCA KITCHE
STAIRS, HANDRAILS AND
BALUSTRADING TO BE
RAKED
CEILIN
CONSTRUCTED IN SITTING
ACCORDANCE WITH BCA P3.9.2 BATH
AND ALL RELEVANT CODES AND
EQUIREMENTS
RAKED
CEILIN
LIFT OFF HINGES TO BE FITTED
TO WC DOORS AND ENCLOSED
SPACES WHERE REQUIRED IN
ACCORDANCE BCA P3.8.3.3 LIVIN BED
PROVIDE MECHANICAL
VENTILATION AND DIRECTLY
VENT TO THE OUTSIDE OF THE
BUILDING (E.G. USING DUCTING
TO A SOFFIT VENT)
UPPER FLOOR: HARDIES
'SECURA' FLOORING TO TILED RAKED RAKED
AREAS CEILIN CEILIN
BED BED
ENGINEER TO CONFIRM
.
ADDITIONAL ROOF
. A
SUPPORTS
O R D
F T I ON
RAKED
CEILIN VERANDA
U E
I S S T F O R CON S TRUC
NO
matt bradley designs
NEW STAIR ©MATT BRADLEY DESIGNS - ACN: 637 963 396 - ABN: 53 637 963 396
www.mattbradleydesigns.com.au - [email protected] - 0488 554 020
ALL DESIGN, CONSTRUCTION METHODS & MATERIALS TO BE IN ACCORDANCE WITH:
- THE BUILDING CODE OF AUSTRALIA (BCA);
- THE QUEENSLAND DEVELOPER CODE (QDC);
- BUILDING REGULATIONS;
- CURRENT ISSUES OF AUSTRALIAN STANDARDS & MANUFACTURER'S
SPECIFICATIONS & INSTALLATION DETAILS FOR MATERIALS USED.
DIMENSIONS ARE SUBJECT TO SITE MEASUREMENT & VERIFICATION.
DO NOT SCALE OFF THIS DRAWING. PLANS COPYRIGHT MATT BRADLEY DESIGNS PTY LTD
PROJECT ADDRESS
163 UPPER PINBARREN CREEK ROAD,
PINBARREN, QLD 4568
DRAW ING TITLE
EXISTING HOME AREAS NEW HOME AREAS NEW FIRST FLOOR
VERANDAH: 44.3m² VERANDAH: 44.3m²
GROUND LEVEL: 93.9m² GROUND LEVEL: 93.9m²
CLIENT
PHILLIP O'MALLEY
TOTAL: 138.2m² TOTAL: 138.2m²
DRAW N
MEASURED TO OUTSIDE FACE OF WALL MEASURED TO OUTSIDE FACE OF WALL EB
SCALE
1 : 100 @ A3
DATE
2021-11-19
PROJECT NO.
2021136
0 0.5 1 2 3 4 5 10m
1 NEW
1 : 100
FIRST FLOOR DRAW ING NO.
WD-09 rev:
QBCC LICENCE: 15025395
SCALE = 1:100
Page 10
NOTES: NORTH
REVISION
PLUMBER TO VERIFY ALL DETAILS No. DATE DESCRIPTION ISS. BY
PRIOR TO COMMENCEMENT OF
WORK /ORDERING
PLUMBER RESPONSIBLE TO
CONFIRM ROOFWATER 11630
DISCHARGE SYSTEM WITH ESTATE
AS CONS AND TO ENSURE APPROX. WIDTH
CORRECT CONNECTION IS 1820 4580 3410 1820
ACCESSED AND SYSTEM USED
GUTTERS AND DOWNPIPES: 775 2560 75
ENSURE THAT ALL GUTTERS, BOX
GUTTERS AND DOWNPIPES ARE
DESIGNED AND INSTALLED IN
ACCORDANCE WITH THE NCC VOL
TWO PART 3.5.3. WITH A MAXMIUM
DISTANCE BETWEEN DOWNPIPES
OF 12M.
ALL SERVICES TO BE HIDDEN
1430
10 °
FORM VIEW AT STREET LEVEL
30 °
4240
30 °
APPROX. LENGTH
14820
30 ° .
R D. A
O
30 ° EXISTING SHEET 30 °
7320
F T I ON
METAL ROOF
U E
(CEILING AND ROOF INSULATION TO
I S S T F O R CO
TOTAL R3.5 MINIMUM)
N S TRUC
30 °
NO
matt bradley designs
©MATT BRADLEY DESIGNS - ACN: 637 963 396 - ABN: 53 637 963 396
www.mattbradleydesigns.com.au - [email protected] - 0488 554 020
ALL DESIGN, CONSTRUCTION METHODS & MATERIALS TO BE IN ACCORDANCE WITH:
- THE BUILDING CODE OF AUSTRALIA (BCA);
- THE QUEENSLAND DEVELOPER CODE (QDC);
- BUILDING REGULATIONS;
- CURRENT ISSUES OF AUSTRALIAN STANDARDS & MANUFACTURER'S
SPECIFICATIONS & INSTALLATION DETAILS FOR MATERIALS USED.
DIMENSIONS ARE SUBJECT TO SITE MEASUREMENT & VERIFICATION.
DO NOT SCALE OFF THIS DRAWING. PLANS COPYRIGHT MATT BRADLEY DESIGNS PTY LTD
1830
PROJECT ADDRESS
EXISTING BULLNOSE SHEET METAL ROOF
163 UPPER PINBARREN CREEK ROAD,
PINBARREN, QLD 4568
DRAW ING TITLE
NEW ROOF PLAN
CLIENT
PHILLIP O'MALLEY
DRAW N
EB
SCALE
1 : 100 @ A3
DATE
2021-11-19
PROJECT NO.
2021136
1 NEW ROOF PLAN
0 0.5 1 2 3 4 5 10m
WD-10
DRAW ING NO.
rev:
1 : 100
QBCC LICENCE: 15025395
SCALE = 1:100
Page 11
REVISION
EXTERIOR MATERIAL & FINISHES No. DATE DESCRIPTION ISS. BY
SYMBOL DESCRIPTION FINISH COMMENTS
FC01 EXISTING PAINTED WEATHERBOARD PT01 ROLL FINISH
FC02 SCYON AXON 133 SMOOTH FIBRE CEMENT SHEET PT02 ROLL FINISH
PT01 PAINT TBC PATCH & PAINT WHERE REQUIRED
PT02 PAINT TBC PATCH & PAINT WHERE REQUIRED
NOTE: ALL CLADDING SYSTEMS MUST BE INSTALLED IN ACCORDANCE WITH MANUF' SPEC. POSITION
CLADDING SHEETS AS SHOWN IN ELEVATIONS AS ACCURATELY AS POSSIBLE
1130
1250
ROOF
LEVEL RL 149500
6880
3500
FC01 FC01 FC01 FC01 FC01 FC01 FC01 VERANDAH
FIRST
EXISTING BEARER
LEVEL RL 146000
1000
GROUND
750
LEVEL RL 145000
1 SOUTH
1 : 100
ELEVATION 2 WEST
1 : 100
ELEVATION
D. A .
E O R
F T I ON
FC01
ROOF
LEVEL RL 149500 U
I S S T F O R CON S TRUC
FC01
NO
FC01
matt bradley designs
©MATT BRADLEY DESIGNS - ACN: 637 963 396 - ABN: 53 637 963 396
www.mattbradleydesigns.com.au - [email protected] - 0488 554 020
3500
ALL DESIGN, CONSTRUCTION METHODS & MATERIALS TO BE IN ACCORDANCE WITH:
- THE BUILDING CODE OF AUSTRALIA (BCA);
VERANDAH - THE QUEENSLAND DEVELOPER CODE (QDC);
- BUILDING REGULATIONS;
FC01 FC01 FC01 FC01 - CURRENT ISSUES OF AUSTRALIAN STANDARDS & MANUFACTURER'S
SPECIFICATIONS & INSTALLATION DETAILS FOR MATERIALS USED.
FC01 FC01 FC01 DIMENSIONS ARE SUBJECT TO SITE MEASUREMENT & VERIFICATION.
DO NOT SCALE OFF THIS DRAWING. PLANS COPYRIGHT MATT BRADLEY DESIGNS PTY LTD
PROJECT ADDRESS
FC01 FIRST 163 UPPER PINBARREN CREEK ROAD,
LEVEL RL 146000
PINBARREN, QLD 4568
1000
DRAW ING TITLE
GROUND
LEVEL RL 145000 ELEVATIONS
3 NORTH
1 : 100
ELEVATION 4 EAST
1 : 100
ELEVATION CLIENT
PHILLIP O'MALLEY
DRAW N
EB
SCALE
1 : 100 @ A3
DATE
2021-11-19
PROJECT NO.
2021136
0 0.5 1 2 3 4 5 10m
WD-11
DRAW ING NO.
rev:
QBCC LICENCE: 15025395
SCALE = 1:100
Page 12
NORTH
REVISION
ELECTRICAL LEGEND No. DATE DESCRIPTION ISS. BY
SYMBOL DESCRIPTION SYMBOL DESCRIPTION
LED BATTEN GPO SINGLE
RECESSED DOWNLIGHT GPO DOUBLE
PENDANT LIGHT (PL01) GPO DOUBLE WATERPROOF
PENDANT LIGHT (PL02) PH PHONE CONNECTION
VANITY LIGHT TV TELEVISION CONNECTION
LED STRIP LIGHT SWITCH POINT
SMOKE DETECTOR DIMMER SWITCH POINT
S.D
MOTION SENSOR MAIN SWITCH BOARD
CEILING FAN HWU HOT WATER UNIT
MV MECHANICAL VENTILATION
NOTE:
- ELECTRICIAN TO PROVIDE ELECTRICAL PLAN
- PROVIDE HARD-WIRED, INTERCONNECTED, PHOTOELECTRIC SMOKE
ALARMS WITH BATTERY BACK-UP, COMPLYING WITH AS3786
KITCHEN
CEILING
RAKED
SITTING
S.D
BATH
RAKED
CEILING
LIVING BED 01
S.D
S.
RAKED RAKED
.
CEILING CEILING
BED 02 S.D S.D
BED 03
R D. A
U E O
F T I ON
CEILING
RAKED
VERANDAH
I S S T F O R CO
NO
N S TRUC
matt bradley designs
©MATT BRADLEY DESIGNS - ACN: 637 963 396 - ABN: 53 637 963 396
www.mattbradleydesigns.com.au - [email protected] - 0488 554 020
ALL DESIGN, CONSTRUCTION METHODS & MATERIALS TO BE IN ACCORDANCE WITH:
- THE BUILDING CODE OF AUSTRALIA (BCA);
- THE QUEENSLAND DEVELOPER CODE (QDC);
- BUILDING REGULATIONS;
- CURRENT ISSUES OF AUSTRALIAN STANDARDS & MANUFACTURER'S
SPECIFICATIONS & INSTALLATION DETAILS FOR MATERIALS USED.
DIMENSIONS ARE SUBJECT TO SITE MEASUREMENT & VERIFICATION.
DO NOT SCALE OFF THIS DRAWING. PLANS COPYRIGHT MATT BRADLEY DESIGNS PTY LTD
PROJECT ADDRESS
163 UPPER PINBARREN CREEK ROAD,
PINBARREN, QLD 4568
DRAWING TITLE
ELECTRICAL PLAN
CLIENT
PHILLIP O'MALLEY
DRAWN
EB
SCALE
1 : 100 @ A3
DATE
2021-11-19
PROJECT NO.
2021136
1 FIRST LEVEL RCP
0 0.5 1 2 3 4 5 10m
WD-12
DRAWING NO.
rev:
1 : 100 QBCC LICENCE: 15025395
SCALE = 1:100