Original source · versioned page text
Appendix 9 - Detailed assessment against the Noosa plan
Plans and drawings
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawn Column 1 Column 2 Column 3
Specific Outcomes Probable solutions Response
S17.5 Basements for residential N/A
uses have flood immunity above
the 1%AEP defined flood event
where alternative means to
mechanical pumping are used to
achieve such immunity; or
S17.6 Basements for non-residential N/A
uses have flood immunity above the
1%AEP defined flood event that may
be achieved by means of mechanical
pumping where the mechanical
feature is installed with adequate
holding tanks and an alternative back
up power source.
Sloping sites S18.1 Buildings and associated Complies
O18 Development on sloping sites— accessways are not constructed on The site is relatively flat
a) is responsive to the natural land with a slope greater than 1 in 4
topography of the site and minimises (25%);
cut and fill; AND
b) does not visually dominate the hill
slope or interrupt the skyline; S18.2 Buildings are of split level N/A
c) is integrated with the natural design that step down the slope or
site characteristics including have a suspended floor
vegetation; and construction;
d) for Multiple housing, takes the form AND
of small separate buildings;
S18.3 Cut or fill is less than 2m Complies
AND in depth;
AND
O19 On sites which are visible from the major
road network, areas of public open space, the S18.4 The distance between the Complies
Noosa River or the beaches new buildings and ground and the lowest part of the
structures including outbuildings, are designed floor of the building does not
so as not to dominate or detract from the exceed 3m to avoid large under
scenic and environmental qualities of the site building areas;
and its setting. AND
S18.5 Buildings present no Complies
more than 3 storeys at any
one point.
S19.1 No solution provided
Roof form
O20 Rooflines— S20.1 With the exception of Complies
a) contribute positively to the local skyline; buildings within the Industry Zone, The roof would have a 8º—10º
b) complement the character of the the main roof of the building has a pitch with significant eaves.
locality; roof pitch no less than 5 degrees
c) are articulated, pitched or skillion; and has minimum 600mm eaves to
d) avoid low pitched (eg. less than 5 at least 75% of the perimeter of the
degrees) or box roof building; AND
profiles/parapets; and
S20.2 Buildings and structures do not Complies
e) do not create opportunities for
include roof top terraces.
residents to overlook the private open
space areas of neighbouring
properties.
Materials and finishes
O21 Buildings and other structures use S21.1 With the exception of Complies
materials and finishes that complement the buildings within the Industry Zone, The building design is
Noosaville character and integrate with the buildings articulated in height, material,
surrounding natural and built environment. a) use a mix of lightweight and projections and colour to avoid
textured external building presenting as a bland or
materials, including timber aggressive structure.
finishes; or
Part 11 – Noosaville Locality Plan (The Noosa Plan) Page 6 of 12
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalSearchable page text hides email addresses. Original files are unchanged and may show email addresses.