Skip to the record
Mmm.. taste the original NoosaWatch™

Council archive · source document

Att 1a - permissible change approval · 132003.221172.8

Attached to the e-mail Change to DA (23657 DA Duplex Dwelling) - 132003.221172.8 Attachements 132003.221172.7 - 61 Elanda St.msg.

of 14

Text shows just the words. Original shows the document exactly as it was published.

Noosa Council documents




                                                                                               132003.221172.7

               Vehicle Access
               19.    A 4.5 metre wide vehicular access driveway to serve the development shall be
                      constructed from the Elanda Street frontage of the site.
                      The driveway shall be designed and constructed to Council’s design standards and to
                      grades that prevent vehicles from scraping and/or bottoming. Should any driveways be
                      constructed to grades that do not comply with AS2890.1-1993 and AS2890.2-1989,
                      Council will require that the driveway be removed and reconstructed to levels that do
                      comply.
               20.    All vehicles shall enter and leave the site in a forward direction.
               Carparking
               21.    Carparking shall be provided within the site as shown on the approved plans, except as
                      modified herein.
               22.    A minimum of 3 covered carpark spaces shall be provided on site and the carparking
                      area shall be designed to comply with the provisions of AS 2890.1-1993 with a minimum
                      head clearance (headroom) at any point of 2.2m.
               23.    Deleted.
               Vegetation Protection
               24.    Existing trees to be retained shall be protected during the construction phase by
                      providing temporary fencing around the trees. Plans submitted for Operational Works
                      approval shall clearly show this.
               Roadworks Contributions
               25.    A roadworks contribution of $1,061 towards the Coastal Major Road Network shall be
                      paid to the Council prior to obtaining a Development Permit for Operational Works. This
                      amount will be subject to variations in the Price Index, All Groups Brisbane from June
                      2004 until the date of payment.
               Roadworks Widening
               26.    The Elanda Street frontage of the development shall be provided with kerb & channelling
                      and bitumen road widening. The new kerb & channel shall be aligned so that it is
                      located 8 metres off the existing kerb & channel on the western side of the road
                      measured from the nominal face of the kerb.
                      All associated and ancillary work including pavement correction to the existing
                      pavement, drainage works, modification of the footpath, and adjustments to any existing
                      infrastructure shall be undertaken to complete the roadworks widening.
                      Plans detailing this work shall be prepared and submitted to Council for approval prior to
                      obtaining a Development Permit for Operational Works.
               Frontage Works
               27.    Footpath improvements such as topsoiling, grassing, and tree planting are required to
                      the Elanda Street frontage of the site in accordance with Planning Scheme Policy PSP1
                      Landscaping Guidelines. Grass shall be couch, free of weeds.
               28.    A new 1.2 metre wide concrete path shall be constructed along the frontage of the site in
                      accordance with Council’s design standards and to an alignment that protects any
                      significant vegetation or any underground services. The path shall be designed and
                      constructed to ensure pedestrian safety using non-slip materials and to produce an
                      evenly graded surface finish.



                                                                                                 Page 4 of 11


Document Set ID: 20351003
Version: 3, Version Date: 07/07/2017                                                               Print Date: 26 July 2017, 8:39 AM

Used in these records

About this file

File size
4.6 MB (large file)
File type
PDF

No other editions are linked here.

Original file

Log in to download the original file

Att 1a - permissible change approval.pdf · 4.6 MB (large file)

The download may take up to a minute.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.