2019-02-18 General Committee Meeting Notes

RECOMMENDATIONS ONLY – NOT THE FINAL DECISION OF COUNCIL
GENERAL COMMITTEE MEETING                                                  18 FEBRUARY 2019


              48.4. Provide 100L NATSPEC street trees every 8m of road frontage, positioned
                    in a manner that supports adequate sightlines and maintains existing trees
                    identified for retention in this permit.
              48.5. Provide details of internal landscaping to the development, including
                    provision of suitable growing media and area to sustain landscaping, which
                    will provide shading and soften the visual appearance of the development.
              48.6. Provide landscaping to each dwelling frontages and internal driveway
                    networks to provide shade and visual amenity.
              48.7. Provide 1 suitable large canopy shade tree in the centre median near the
                    2 visitor car spaces at the Y junction located internal to the site.
              48.8. Provide details of the methods to be used during the vegetation clearing
                    including the use of licensed spotter/catchers, disposal of cleared
                    vegetation, methods to ensure retained vegetation is protected from
                    development works, in particular where works are proposed adjacent to
                    root zones of vegetation located on the road reserve with reference to
                    current AS 4970-2009 Protection of Trees on Development Sites.
        49.   The open space and setback areas are to be landscaped in accordance with
              Council’s Policy on Landscaping Guidelines and a properly prepared landscape
              plan prepared by a suitably qualified Landscape Architect or Horticulturalist. Such
              landscaping is to be completed prior to the premises being occupied and
              maintained at all times thereafter.
              ENVIRONMENTAL HEALTH
              Waste Management
        50.   The developer must provide waste storage and disposal facilities in accordance
              with Planning Scheme Policy No. 9 “Waste Management Multi-Dwellings and
              Commercial and Industrial Premises”. The facilities must include an external
              impervious area correctly sized for all refuse and recycling containers and
              suitably screened from public places and neighbouring properties. A bin wash
              area is required with a cold-water tap, hose and drain outlet connected to sewer,
              via a bucket trap. The drain outlet must be designed to prevent storm water entry
              to the sewerage system. This can be achieved with a nib wall 50mm high and up
              to 700mm x 700mm wide (max 0.5m²), or alternatively the waste area can be
              roofed, or any other design approved by Council.
        51.   Refuse containers must be provided in accordance with the requirements of the
              Environmental Protection (Interim Waste) Regulation 1996 and (Waste
              Management) Regulation 2000, for the storage and collection of refuse.
              Mechanical Equipment
        52.   Written certification is required from a suitably qualified person confirming that
              sound pressure levels from all mechanical plant and equipment comply with the
              following:
              a.    Air-conditioning and Refrigeration
                        7am to 10pm: Maximum background + 5dB(A)
                        10pm to 7am: Maximum background + 3dB(A)



                                                                                 Page 12 of 15