Original source · versioned page text
Landscape Proposal Plans
Original PDF page 5, section 1. The text section number identifies this passage in the reader.
FENCING SCHEDULE
Fencing and screens to private
CODE / ITEM REQUIREMENTS courtyards as per Architect's
documentation
\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \
8 \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \
\
\
Fence Type 1 Nom.1800mm high HWD timber paling fence with posts in concrete footings. Natural stain finish to
\
\
\
all timber surfaces. Fence to rake down to 1.2m at Fence Type 2 intersection. 100x100mm HWD
\
\
posts to have in-ground concrete footings. Posts to have no heart (50mm from centre of core pith).
\
\
\
Posts to have natural stain finish. Aris to all exposed edges. Footings to be no fines concrete -
\
\
\
Nom.800mm deep/Nom.1200mm deep at corners. Footings to be set with Nom.100mm deep
\
\
drainage gravel layer to base of footing hole. All footing tops to have Min.25mm weathered-off
\
\
\
surround to prevent water ponding and entering between concrete and post.
\
\
\
\
D.P
D.P
\
\
Gate Type 1 Nom.1800mm high gate to match Fence Type 1. All fixtures to be HDG or 316 SS and installed as
\
\
\
per Manufacturer's specifications. Gate located along Fire Egress Pathway - to be hinged to allow
\
Gate Type 2A
\
for gate to open outwards without a key; have lever handle and secured with pin-pad type lock to
\
\
- refer to notes
\
external face.
\
\
\
Fence Type 2 Nom.1800mm high steel 25x25mm tubular picket with 40x40mm tubular rail security fence panels.
\
\
\
Nom. panel length to be 2400mm. Install with 2400x65x65x2mm steel posts in concrete footings.
\
\
\
2pac powder coat finish to all exposed steel post surfaces - colour to be Satin Black. Recommended
\
\
Manufacturer: Stratco (1300 155 155). To be installed as per Manufacturer's specifications and
\
\
\
requirements.
\
\
\
Gate Type 2 Nom.1.8m high steel single gate to match Fence Type 1. Gate to be installed with Manufacturer's
\
\
\
recommended fixings, hinges and locking latch. Recommended Manufacturer: Stratco (1300 155
\
\
\
155). To be installed as per Manufacturer's specifications and requirements.
\
\
\
Gate Type 2A Nom.1.8m high steel single gate to match Fence Type 1. Gate to be installed with Manufacturer's
\
\
\
recommended fixings, hinges and locking latch. Gate located along Fire Egress Pathway - to be
\
\
hinged to allow for gate to open outwards without a key; have lever handle and secured with
\
\
D.P
\
pin-pad type lock to external face. Recommended Manufacturer: Stratco (1300 155 155). To be 7
\
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original (Landscape Proposal Plans.pdf)
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.