Council archive · source document
Landscape Plans · OPW24/0196.01
Plans and drawings: the text below has words only, no drawings.
Very large file (12.4 MB): may take a few minutes to open.
Original PDF page 12, section 1. The text section number identifies this passage in the reader.
00
CODE / ITEM MANUF. REQUIREMENTS EXISTING SURFACE LEVEL
0.
EX
HYDRAULICS MISCELLANEOUS
0.00 RELATIVE LEVEL
SUB-SOIL DRAINAGE Type: High density polyethylene slotted corrugated drainage pipe - 90mm dia. Pipe to be GRAVEL SURROUNDS TO BUILDING Type: Washed river pebble approx 20mm dia, locally sourced;
socked in geo-textile filter fabric. FACADE Sizes: 600mm minimum strip between building facade & garden areas;
Drainage Aggregate: 10-20mm washed drainage aggregate. Depth: 100mm depth over weed matting; PAVEMENT TYPE 1
Connect to SW system Weed Mat: Non-woven weed barrier - Pillar or Saxon or similar P01 Coloured Concrete
EXISTING STORMWATER PITS Allow to adjust position & finished levels to suit proposed surface finishes. Allow for all PP - LARGE POT PLANT Type: Proprietary ceramic pot or urn min 600mm dia (Bunnings); PAVEMENT YPE 2
plumbing works. P02 Portland Grey Concrete
RAISED FLOWERING GARDENS Type: Proprietary by 'Jack' (Bunnings) raised corrugated planter;
SOFTSCAPE Rectangular Dimensions: 1800L x 900W x 450mm finished height with curved ends; TGSI - TACTILE GROUND
PLANTING ON NATURAL GROUND Mulch: 75mm medium grade Hoop Pine mulch; Finishes: Standard colorbond finish - 'Monument'. SURFACE INDICATORS
Soil: 300mm minimum depth imported Soil Blend, comply to AS4419 table 1; Type: Proprietary by 'Jack' (Bunnings) raised corrugated planter;
RAISED FEATURE PLANTER SYNTHETIC GRASS
Subgrade Cultivation: Minimum 150mm depth; Dimensions: 800dia x 450mm finished height;
Round
Finishes: Standard colorbond finish - 'Monument';
RAISED GARDEN PLANTERS Soil: 300mm minimum depth premium grade imported topsoil over lightly tamped open
TURF AREA
sandy loam, to achieve the finished heights required SEATING SHELTER Type: Steel HDG posts with HWD timber bearers & cross supports;
Mulch Type: 75mm minimum depth Hoop pine - medium size or approved similar; Sizes: Refer to typical details, contractor to provide shop drawings for approval prior to
75mm min depth Sugar Cane mulch to raised veggie gardens Note: It is the responsibility of the construction; NEW GARDEN AREA
Cultivated Subgrade: 150mm depth builder to provide all final designs, Finishes: Steel posts - powder coated: colour semi gloss Black, all timber beams & fixings to
engineering designs & engineering be painted: colour to match building soffits tbc. All fixings to be stainless steel.
TURF TYPE 1 Turf Type: A grade 'Wintergreen" couch certifications for all structures. Roofing Panels: 75mm thick 'Cooldek' or similar corrugated panels; RAISED PLANTER
Soil: 150mm minimum depth imported topsoil Roofing Panel Colours: Topside - Armour Grey, underside - off-white; Proprietary type planter
Cultivated Subgrade: 150mm depth
SANDSTONE SEATING & RETAINING Type: A grade split Helidon stone;
PLANTS & TREES Plants to be locally grown and be commercially available. BLOCKS Sizes: 1000x500x500mm; EXISTING GARDEN AREA
Jointing: Allow to mitre cut all edges on the curve & install grout to all joints, colour to match To be retained
Use healthy, nursery-grown plants in the following minimum sizes:
Garden beds: groundcover's - 140mm pot, shrubs - 200mm pot, trees - 200L & 400L bag. stone.
Planting Densities: allow minimum 4 plants per m² to all garden beds. Trees as shown on Install sub-drainage behind walls where required. GRAVEL BUILDING EDGE
600mm WIDE
plan.
Use appropriate pre-planting and maintenance fertilisers (controlled release types Sample: Provide photo image of stone for approval prior to placing ordering
preferred).
E1 EDGE TYPE 1
SHADE SAILS Type: New freestanding shade sails, refer to plan for extent; Concrete Extruded Edge
All trees to be stakes and hessian ties. To be removed at end of establishment period.
Shade Sails: High quality stitched fabric; colour tbc
IRRIGATION Type: Allow to provide a fully functional commercial grade automatic irrigation system to All sails (min 10 yr warranty) dual layered & reinforced corners, edges & seams; stainless
SUBSOIL DRAINAGE
All gardens & lawn areas garden & lawn areas as shown on plan. Refer to Hydraulic Engineer's documentation for steel fixings, cables & tension hardware.
water connection details. Sail Colour: tbc with Ozcare;
Poles: Steel posts 168mm OD min; CHS x various heights, including bored concrete FEN-1 FEN-1 - SECURE FENCE LINE
Irrigation system to include: rain sensor; controller with the required number of footings; By Others
stations (zones); solenoids (including fittings, manifold, cover, etc.) and all required Pole finish: Powder coat finish, colours - tbc;
cabling, connectors, pipes, fittings, emitters, etc. for a complete and operational Engineering: Contractor to allow for all required engineering including Engineering LARGE POT PLANT
PP On solid base
system. Certification Form 15 & Installation Form 16. Provide fully engineered shop drawings for
Garden beds are to be irrigated with pressure compensating drippers only, no pop-ups or approval prior to installation.
shrub sprays are to be used. SANDSTONE RETAINING WALL
Turf areas to be irrigated with pop-up sprays.
FEN-1 - SECURE FENCE Type: Commercial grade medium duty steel security fence, posts & gates;
Style: Flat topped & square tubes; SANDSTONE SEATING BLOCK
SUBMISSION: Full detailed design drawings to be provided for approval by Principal prior to
Panel Height: 2.1m finished height - tbc with Ozcare prior to ordering of materials;
installation.
Colour: Colorbond 'Monument' or similar - tbc with Ozcare
E1: Edge Type 1 Type: Extruded concrete edge;
SEAT BENCH SEAT
Size: 150x150mm, refer standard detail; Note: confirm with Ozcare fence requirements before ordering of materials. By Ozcare
Colour: Standard Portland grey
SSP
SURFACE FINISHES SHADE SAIL & POST
Note: Refer to Structural Engineer's drawings for all structural requirements for all pathways;
Refer to Civil Engineer's drawings for all pavement setouts and finished surface levels.
PROPOSED TREE
PAVEMENT TYPE 01 Type: Full depth reinforced coloured concrete;
Broom finished concrete Colour: CCS 'Paperbark';
Finish: Broom finished;
Sealant: Penetrating type sealant - CCS 'Streetscape' or approved similar; GARDEN BENCH SEATING Supplied by Ozcare T10521 EXISTING TREE
To be retained
PAVEMENT TYPE 02 Type: Reinforced concrete; ESTABLISHMENT & MAINTENANCE General Landscape Areas: Allow to provide 13 weeks maintenance & establishment to all all
Broom finished concrete Colour: Portland Grey; landscape areas.
Finish: Broom finished; EXISTING TREE
Sealant: NA; To be removed
T258
TGSI - TACTILE GROUND SURFACE Chelmstone or approved Type: Cautional tactile fibre reinforced wet cast concrete paver, install to manufacturers
INDICATORS similar specifications;
Size: 300x300x40mm;
Colour: 'Corn'
SYNTHETIC GRASS Urban Turf Solutions Type: Synthetic Grass - 'Urban Windsor' 35mm pile height with 5-10mm fine dry sand
brushed thru installed over 150mm compacted subgrade.
Allow to installed concrete haunch to all edges for adhesive fix of edges down (do not pin or
turn down edges).
Sample: Provide 300x300mm sample patch of grass for approval by client
CODE / ITEM MINIMUM SAMPLE SIZE & REQUIREMENTS
EARTHWORKS/SOILS
Imported Topsoil - general areas Written confirmation all soils delivered to site meet the specified soil criteria (not test
results)
PLANTING
Advanced Trees Confirmation in writing of order of trees;
Nursery Photos;
Nursery Inspection - 1 month prior to installation
Organic mulches 0.5kg in sealed container or bag
HARDSCAPE
All Pavements P1 & P2 full depth coloured concrete 2m x 2m with full colour range including all jointing types
Tactile Ground Surface Indicator - Hazard/Warning 1 paver sample
Note: refer Architect's documentation for tile types
PRELIMINARY ISSUE ONLY NOT FOR CONSTRUCTION
client drawings title drawing number revision
ACACIA WING - LANDSCAPE SCHEDULES 01737AW LP00.02 P2
PRELIMINARY ISSUE
Copyright: The design illustrated in these NOT FOR CONSTRUCTION project scale project number
P2 UPDATED BACKGROUNDS 13.04.2026 JR
documents is the exclusive property of VIEW
Landscape Architecture Pty. Ltd. ACN 602 140 OZCARE NOOSA RE-DEVELOPMENT
P1 PRELIMINARY ISSUE 10.12.2025 JR
492 and must not be reproduced, or used in
whole or in part without the expressed written 80 Cooyar Street, Noosa Heads Qld AS SHOWN @ A1 01737
permission of VIEW Landscape Architecture.
issue amendment date dwn/chk
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Landscape PlansRelated documentApplication case desk ↗
Landscape Plans.pdfRelated documentApplication case desk ↗
About this file
- File size
- 12.4 MB (very large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.