Original source · versioned page text
AS 1428.1-2009 PWD Code.pdf
AS 1428.1—2009
© Standards Australia
TABLE C1 (continued)
Maximum Clause/
Component Gradient Width Height Length Landing spacing
camber/crossfall Figure
Ramp Steeper than 1000 mm See Premises N/A Ramp gradient Landing spacing To be level 10.1 and 10.3
(straight) 1 in 20 and not minimum Standards/BCA for
1 in 14 9 m maximum
steeper than unobstructed maximum height of a
1 in 14 series of connected 1 in 20 15 m maximum
ramps
Between 1 in 14 By interpolation
and 1 in 20
Ramp Steeper than 1500 mm See Premises N/A Ramp gradient Landing spacing N/A 10.1 and 10.4
(curved) 1 in 20 and not minimum Standards/BCA for
1 in 14 9 m maximum
steeper than unobstructed maximum height of a
1 in 14 series of connected 1 in 20 15 m maximum
ramps
Between 1 in 14 By interpolation
and 1 in 20
Step ramp Not steeper 1000 mm 190 mm maximum 1900 mm N/A To be level 10.1 and 10.6
108
than 1 in 10 minimum maximum
unobstructed
Kerb ramp Not steeper 1000 mm 190 mm maximum 1520 mm N/A To be level 10.1 and 10.7
than 1 in 8 minimum maximum
unobstructed
Threshold Not steeper Minimum width of 35 mm maximum 280 mm N/A N/A 10.5
ramp than 1 in 8 opening between maximum
door jambs
unobstructed
Landing with Not steeper 1000 mm N/A 1200 mm Refer to walkways and ramps A camber or crossfall 10.1 and 10.8
no change of than 1 in 40 or minimum minimum not steeper than
direction 1 in 33 where unobstructed 1 in 40 or 1 in 33 where
the surface is the surface is bitumen.
bitumen At doorways no
crossfall or camber
www.standards.org.au
(continued)
Preview the original
The page text is free to read. Previews and downloads of original files need an account.
Log in to previewLog in to download the original (AS 1428.1-2009 PWD Code.pdf)
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.