Skip to the record
Beware of cheap imitations.

Original source · versioned page text

AS 1428.1-2009 PWD Code

of 116

Page text read automatically using OCR, there may be inaccuracies

                                                 11                                 AS 1428.1—2009




                                     DIMENSIONS IN MILLIMETRES


                   FIGURE 3 EXAMPLES FOR PASSING SPACE FOR WHEELCHAIRS

       6.5 Circulation space for wheelchair turn
       6.5.1 60° to 90° turn
       The space required for a wheelchair to make a 60° to 90° turn shall have a gradient
       no steeper than 1 in 40 and shall be not less than 1500 mm wide and 1500 mm long
       in the direction of travel. The space may be splayed across the internal corner as
       shown in Figure 4.
       6.5.2 30° to <60°
A1
       Where the angle of turn is 30° to less than 60° and the width of the path of travel is
       less than 1200 mm, a splay of at least 500 mm × 500 mm shall be made on the
       internal corner, as shown in Figure 4.




 www.standards.org.au                                                            © Standards Australia

Log in to download the original (AS 1428.1-2009 PWD Code.pdf)

Searchable page text hides email addresses. Original files are unchanged and may show email addresses.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.