AS 1428.1-2009 PWD Code

AS 1428.1—2009                                   38



       The profile of ramps shall comply with the following:
       (i)     The design and construction of kerb ramps shall be as shown in
               Figures 24(A), 24(B) and 24(C).
       (ii)    The sloping sides of a kerb ramp shall be tapered or splayed as indicated in
               Figures 24(A) and (24(B).
       (iii)   The angle at the base of the kerb ramp shall be a minimum of 166° as shown
               in Figures 24(A) and 24(B).
       10.7.3 Finishes
       Kerb ramps shall have a slip-resistant surface.




© Standards Australia                                                           www.standards.org.au