AS 1428.1-2009 PWD Code.pdf

                                                 71                                  AS 1428.1—2009



A1




                                      DIMENSIONS IN MILLIMETRES


                        FIGURE 40 ZONE FOR POSITION OF FLUSHING CONTROL

       15.2.6 Toilet paper dispenser
       The outlet for the toilet paper dispenser shall be located within the zone specified in
       Figure 41.
       The toilet paper dispenser shall not encroach upon the clearance space required
       around the grabrail specified in Clause 15.2.7.




                                      DIMENSIONS IN MILLIMETRES


                   FIGURE 41 ZONE FOR POSITION OF TOILET PAPER DISPENSER

       15.2.7 Grabrails
       Where a concealed or high-level cistern or flush valve is used, a continuous
       grabrail, as specified in Clause 17, shall be provided across the rear wall and side
       wall nearest the WC pan, as shown in Figure 42. Where a low-level non-concealed
       cistern or flush valve is used, the grabrail shall be terminated at each side of the
       cistern, as shown in Figure 42.

 www.standards.org.au                                                             © Standards Australia