20250730_165753

NOOSA COUNCIL SELF ASSESSMENT CHECKLIST

Vehicle Crossover Checklist — Standard or Non-standard?

 

Driveway Crossover Checklist — Standard or Non-standard?

Complete the following checklist to determine if your proposed crossover is standard or
non-standard and then complete and submit the relevant form to council for approval.

Refer to the Institute of Public Works Standard Drawings (RS-049, RS-050 and RS-056, RS-056.1) to
assist you in answering the questions. Refer to the Planning Scheme to determine if your property is
urban/rural. Note: If access to your property is from a Queensland Government controlled road, you will
require approval from the Department of Transport and Main Roads to complete your crossover construction.

Answer Yes or No

 
   

If in an urban area, is the crossover to be constructed from concrete (includes, coloured and |
exposed aggregate concrete, asphalt or bitumen; must be compliant with Aust. Standards for
slip resistance) No raised edges i.e. stamped concrete raised pattern or painted/ sealed/
polished surfaces.

 

 

Ifina rural area, is the crossover to be constructed to council's rural standard drawing RS-056 | Yes O No

 

 

 

 

 

 

 

 

Is this going to be the 1e only crossover for this property? Wes Ol No
Is the crossover access located so as to provide a clear view of passing Fiesieetais anid Ves C O No
vehicles? (Refer to Standard Drawings RS- 049, RS-050 or. RS- 056)

Is the crossover in a location where there are no painted or concrete traffic Mande on the wes O No
road i in front of the crossover?

Is the crossover at least 1.0 metre clear of the nearest storm water pit or r power pole? wes 01 7 No
Is the crossover in a location where there are no road signs or trees in the way? | Ves oO No
Is the crossover in a location where its construction will net disturb a survey mark? Ves | ONo

Is the crossover in a location where there are no water meters, fire hydrants or valves in the Ves O No
iP th of the crossover? — S|

 

Is the crossover in a location where it will not cover the water supply pipe between the main eso O No
and the meter?

 

Is the crossover in a location where there are no sewerage or storm water manholes in the Ves O1 No
path of the crossover?

 

Will the crossover levels match the existing concrete foctoaths (if present)? Wes O No

Is the crossover outside of a prohibited location as shown in Standard Drawings number | |eVes O1 No
RS-049 and RS-050 or for rural driveways Standard Drawing number RS-056?

 

Is the crossover in a location where it will not be within 10 metres of the approach side of a oa O No
bus stop?

 

Is the crossover in a location where it will not be built overa recognised easement? Wes ONo |}

For an stan residential crossover is it less than 25 metres i in n length within the road reserve? Wes O No-

 

For a rural crossover is it less than 45 metres in length within the road reserve? Oo Yes o [No

 

If you are ona corner, will the crossover be constructed in the road described as your r street oy
address? ee.CING

 

 

 

If you have answered ‘No’ to any questions you need to cael for a Non Standard - Operational Works
approval, using DA Form 1—

mVolmareMVenclAN cece ie wi ee, in the re 5 eee your driveway crossover is
considered standard and no additional council approval is required. (Please note the Standard
Driveway crossover terms and conditions and safety requirements included in this document