Att 5. BAL Report - 555 Louis Bazzo Dr

Note that these minimum setbacks are less than the permitted clearing distance for essential management
purposes, of 1.5 times the tallest tree height. The clearing required to meet these minimum setbacks is
necessary for the construction of a dwelling to be considered acceptable risk.

Any Class 10a structure built within 6m of the dwelling shall be constructed in accordance with this Standard.

The significance of the radiant heat flux levels discussed is shown below in Table 7.




Table 7. Significance of various RHF levels (Source: NSW RFS, 2006)




7.0 Bushfire Protection Measures in Combination




Figure 12. Bushfire Planning Measures in Combination (Source: NSW RFS, 2006)


Report compiled by Bushfire Risk Reducers for Mr Tim Olah, June 2021                      Page 22