Callaghan and Toth IWMP Report revised

ENVIRONMENTAL
100% RECYCLABLE
The system is 100% recyclable and has been load tested with recycled crushed construction waste for the rock drainage
media, potentially diverting many tonnes away from landfills.

AUSTRALIAN MANUFACTURED
ecoAID® is manufactured in Australia at a state-of-the-art ISO 9001 accredited manufacturing facility featuring low energy
consumption and servo-hydraulic plant with energy savings between 20 and 80%.

LOW CARBON FOOTPRINT AND CARBON MILES
With ecoAID® being manufactured in Australia, the ‘carbon miles’ are lower than imported systems. The stacking and
transportation efficiency makes ecoAID® chambers a sound environmental choice compared to oversize round pipe or
concrete tanks in detention and infiltration applications.

LONG SERVICE LIFE
ecoAID® is manufactured using injection moulded UV stabilised virgin polypropylene ensuring it meets its 100 year+
in service design life. The storage is serviceable due to unimpeded access to the ‘Catch-All-Row’ for cleaning and
maintenance from the ground surface level, so storage volume is not lost over time.



TECHNICAL SUPPORT
Geofabrics are able to provide technical support to design engineers, architects, developers and contractors. Our technical
hub can provide information relating to application suitability, system sizing, design specifications and full CAD design
suggestion drawings. Feel free to contact us directly using the details below, or visit our website where additional general
and technical information is available.




                                                              GEOFABRICS.CO


  MELBOURNE                   SYDNEY                   NEWCASTLE                COFFS HARBOUR                    PERTH                    ADELAIDE
 (03) 8586 9111            (02) 8785 8800             (02) 4951 2688             (02) 6653 5706              (08) 6305 0561             (08) 8162 5855

    BRISBANE                 TOWNSVILLE                BUNDABERG                   GOLD COAST                   HOBART                    DARWIN
  (07) 3279 1588            (07) 4774 8222            (07) 4155 9968              (07) 5594 8600             (03) 6273 0511             0407 523 669



ecoAID are registered trademarks of EcoAID Pty Ltd. EcoAID Pty Ltd is Australian owned and operated.
IMPORTANT NOTICE - DISCLAIMER - The information contained in this brochure is general in nature. In particular the content of this brochure does not take
account of specific conditions that may be present at your site. Site conditions may alter the performance and longevity of the product and in extreme cases
may make the product wholly unsuitable. Actual dimensions and performance may vary. If your project requires accuracy to a certain specified tolerance
level you must advise us before ordering the product from us. We can then advise whether the product will meet the required tolerances. Where provided,
installation instructions cover installation of product in site conditions that are conducive to its use and optimum performance. If you have any doubts as to
the installation instructions or their application to your site, please contact us for clarification before commencing installation. This brochure should not be
used for construction purposes and in all cases we recommend that advice be obtained from a suitably qualified consulting engineer or industry specialist
before proceeding with installation. © Copyright held by Geofabrics Australasia Pty Ltd. All rights are reserved and no part of this publication may be copied
without prior permission.