Council archive · source document
07/2174 - MCU - Multiple Housing Type 4 - Conventional 5 Units [As Published] · 132007.2174
column 1 Specific Outcomes 014 Multiple housing is designed and sited to minimise the extent of shadows cast on solar photovoltaic cells on roofs of adjoining buildings. Sloping sites 015 On sloping sites, buildings and structures are designed to maximise the use of the natural topography and minimise the need for cut and fill. column 2 Peele eel Ol CoM mere eT Ly ELEVATION —- ILLUSTRATES BUILDINGS THAT ARE SITED TO MAXIMISE SOLAR ACESS TO ADJOINING PROPERTIES THROUGH ROOF DESIGN AND UPPER STOREY POSITIONING TO MINIMISE IMPACTS ON PROPERTIES O THE SOUTH. DETAILED ELEVATION — THE MEASUREMENT AT *-" IS 50% OF THE WIDTH OF THE SOUTHERN PROPERTY. IT'S NOT AFFECTED BY SHADOWS FROM THE NORTHERN NEIGHBOUR, EVEN IN THE MIDDLE OF WINTER WHEN THE SUN IS LOW. $14.1 No solution provided $15.1 Buildings and structures on sloping sites— a) Have a maximum distance of 3m between the ground and the lowest part of the floor of the building or the building incorporates undercroft skirting or screening (eg. timber battens) to the full height of any undercroft area higher than 3m above ground level at the perimeter of the building; b) are of split level design that step down the slope or have suspended floor construction; c) limit the amount of cut or fill to less than 1.5m in depth; and Gd) _do not result in the spread of fill beyond the footprint of Residential Uses Code - 00868 Oak Investment Holdings Pty Ltd Column 3 Compliance Not applicable page 5
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
07/2174 - MCU - Multiple Housing Type 4 - Conventional 5 Units [As Published]Related documentApplication case desk ↗
About this file
- File size
- 6.3 MB (large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take up to a minute.