Skip to the record
NoosaWatch™: The source of truth.

Council archive · source document

REFER: PBA11/0095 Referral Agency Response - roof top terrace - 34 Belmore Tce SUNSHINE BEACH

of 15

Text shows just the words. Original shows the document exactly as it was published.

Check the original when the exact wording matters.

                                    (AP I 7/0054
       Sunshine Coast               SCRC CORRESPONDENCE                    2011/12 Regional Strategy and Planning
       C ouncil                                                             Request for Referral Agency Response


                                                                                         (Class 1 a or Class 10 building or structure)
                                                              eduJ


 1. Applicant Details
 Applicant     A,e r L M E1- Vi `
 Postal address      34 .BELMdRE                          7e E S(1NSKIn/6 BEACt>< Postcode                              4567
 Phone 01_.            //.2 7 W Email                     i          o^designoncr/rTp/ay. Co ^'+


 2. Assessment Manager



 3. Property Details
 Address                                                                            BEr1cPostcode
                            "WoRE          7                                                                            q 5-a-7
 Lot       T/ 9                                Plan No.                                      Property No.

 Planning Scheme (please tick v')     q    Caloundra City Plan 2004        q    Maroochy Plan 2000           q    The Noosa Plan 2006

 Planning Scheme Residential Zone/Precinct:


 4. Existing Approvals
 Do any existing approvals and/or Plans of Development apply to the site?' (please tick V)               q       No       q    Yes
 If yes, application number:
 'NOTE: The referral provisions of Schedule 4, Table 2, Item 2 cannot be used to resolve inconsistencies between a building application
 and a higher order approval, including Plans of Development (for example, differences in building setbacks, site coverage). If the
 proposed detached house does not comply with a higher order approval and/or Plan of Development, then Council may direct refusal
 of the application unless: (i) the plans for the detached house are amended to comply with the higher order approval and/or Plan of
 Development; or (ii) Council approves a change to the higher order approval and/or Plan of Development that reflects the proposed
 detached house.



 5. Description of proposal
                            Roo,          TOP T ERI2 g c it=




                                               V %0;                   Count er
                                                          8 DEC 2011

                                                       Tewantin
13cs         $ tag
 Privacy
 Council will use any personal information provided for the intended purpose only and for remaining in contact with you. Council is
 authorised to collect this information in accordance with the Local Government Act 2009 and other Local Government Acts. Your
 personal information is only accessed by persons authorised to do so. Your personal information is dealt with in accordance with
 council's privacy [email protected]           rnail4keunshineooast.gld.gov.au I T 07 5475 7272 F 07 5475 7277
 Locked Bag 72 Sunshine Coast Mail Centre Old 4560      ABN 37 876 973 913

 Caloundra Doke 1 Ornrah Avenue Caloundra Old 4551       Wroochydore office 11-13 Ooean Street M.n othydom Old 4558
 Nambour offiw Cnr Currie and Bury Streets Nanrbour Old 4560    Tewantin office 9 Pelican Street Tewantin Old 4565


 1 of 3    2011/12 Regional Strategy and Planning Request for Referral Agency Response                           FM441/2-14/07/2011
Full text of the other 14 pages

Page 2

6. Reason for referral (please,/ all applicable boxes)
The development would have required a development permit for a material change of use (code or impact assessable) if
Schedule 4, Table 2, Item 2 of the Sustainable Planning Regulation 2009 did not apply for the use, for the following
reason(s):
VT he detached house exceeds the height limit/number of storeys specified in the relevant planning scheme.
       he detached house does not meet one or more of the acceptable solutions for self assessable development within
     the relevant planning scheme detached house code2. Please specify the area(s) of non compliance in table below

Acceptable solution                                                                                Extent of non compliance
(e.g. S1.1, A1.1)                  (e.g. annexed unit, flllinglexcavation)                        I (brief description)
                                                                                                              n
         c^14.1




'NOTE: If the non compliance with acceptable solutions relates to siting (setbacks), site cover or number of carparking spaces, then a
request for a referral agency response for under Schedule 7, Table 1, Item 26 of the Sustainable Planning Regulation 2009 is NOT
triggered. These areas of non compliance are to be assessed by Council against the relevant provisions of the QDC. Such assessment
by Council may be undertaken either by an applicant lodging an application for Preliminary Approval of Building Works with Council. or
by a private building certifier referring the building application to Council as a concurrence agency under Schedule 7, Table 1, Items 19-
21 (Design and Siting).

O The detached house is a removal house and is located in the Maroochy Plan 2000 area.


7. Reasons for and justification of this request (i.e. how the proposal complies with the performance criteria)




                                                                                         ....._                             . . . . __ _   -,
                                                                                             Use separate sheet if more space is required.'


8. Attached Documentation*
PlanlDrawinglReport Number




2 of 3   2011/12 Regional Strategy and Planning Request for Referral Agency Response                              FM441/2-14/07/2011

Page 3

'Please enclose documentation with request. Three (3) copies of plans and any other material relied on in support of the submission.



Application no.     Amount paid          Date paid            Receipt no.          Initial              Date stamp


Receiving Officer
Assessment Responsibility (please tick 3 )
q    Planning Assessment (exceeds height limit/number storeys and/or existing approvals
     apply)
q    Building Services (all other matters)
Comments




Payment options
In person     Customer service centres: 8.30 am to 4.30 pm Monday to Friday (excludes public holidays).
By mail       Cheque or money order to be made payable to: Sunshine Coast Regional Council.
               q Cheque                      q Money order                  q Mastercard                 q Visa
              Card number                                                   Expiry date                  Amount $
               Name on card                                                 Signature of cardholder
               Phone                                                        Is a receipt required?        q Yes         q No


3 of 3    2011/12 Regional Strategy and Planning Request for Referral Agency Response                       FM441/2-14/07/2011

Page 4

                                                                                          A.R. & L Melville
                                                                                          34 Belmore Tce
                                                                                          Sunshine Beach
                                                                                                 Qld 4567

                                                                                                  28/11/11

Aft. Jack Lewis,

We wish you to consider our application for a roof top terrace. After investing $$ in the design and
engineering plans we were advised by our certifier Pacific BCQ that terraces are no longer in the town
plan for new dwellings. With regards to our application to construct a terrace above the existing deck on
our home it would be appreciated if you could take into consideration the following items.


   1. Because of the slope of the blocks beside and behind the house, the impact of a stairwell &
      terrace on the neighbouring land does not change. From the height of the existing deck and from
      the proposed staircase the view into the neighbouring properties remains the same. From the
      new terrace, the only change is to look over the roof tops at the rear of the block. The view into
      the yards (mostly blocked by vegetation) remains the same. We can now see into the neighbours
      (where the vegetation doesn't block the view) & vice versa from the existing deck.

   2. The staircase can not be changed from the position in the plan as it will a) intrude into the usable
      area of the existing deck, b) if the deck was extended it would obstruct easy access at ground
      level on the north east side of our house, c) it would then intrude on the neighbours on that side.

   3. Roof Top Decks are already constructed at 5 Seaview Tce - which looks over the house at the
      top of Belmore Tce, 26 Belmore, 22 Belmore, 20 Belmore (completed early this year) & on the
      apartments at the corner of Belmore & Stevens St. Roof top terraces are also in surrounding
      streets such as Bryan St.

   4. We would like to use part of the new terrace for a home vegetable garden as the land at ground
      level is mostly shaded by existing vegetation from neighbours trees.


Regards


Tony & Lesley Melville

Page 5

.^^'OSS^/ {a


[OCR of page images]
Sees

43<e09H
AoL Ayownae te

7S PAWL
FALYOSSY A
Zoom NOLL02

 

‘sidkWwoIawP

ONELSLKZ

 

 

8 ANA aa) 9 ee ay

 

 

 

Page 6

                   A1N 6)     L- r1    Lv IL
                                           L- L
t,- (2---(I                                                                                      t. t.. lc-,-/ AT i O N1
                   3 41     :j3   L   M O R_ c.    T C C.

                       0V NSHtNE.         L' f\C1-i




                                                                                         PENCE




   N£IGHv^6 uRI'Jc'"                                        °5 c Lt   i s I3t = i   WeT'R, F
                                                  A P PRO
     F-tovs's-
             -

Page 7

ASVOUIVLS TVUldS GASOdOUd AO ALIS LV TAATT AOOU WOU ACIS dOL

-

 

Page 8

                                                                        a
BACK CORNER FROM ROOF LEVEL AT SITE OF PROPOSED SPIRAL
STAIRCASE




                                                                   .i
DIRECT BACK NEIGHBOUR FROM ROOF LEVEL. OF EXISITING DECK AT SITE

Page 9

PROJECT DESCRIPTION
PROPOSED RESIDENTIAL ADDITION ON LOT NO ? (NO. 2)
BELMORE TCE, SUNSHINE BEACH, QLD, AUSTRALIA.
SP .?
PARISH OF WEYBA
COUNTY OF CANNING
LOCAL AUTHORITY : SUNSHINE COAST SHIRE COUNCIL
TOTAL ALLOTMENT AREA: ? sqm


CONSTRUCTION NOTES
GENERAL                             ALL WORK TO COMPLY WITH BUILDING CODE OF AUSTRALIA AND ITS MOST CURRENT AMENDMENTS
                                    THIS CONSTRUCTION BEING CLASS 10A AND TYPE A CONSTRUCTION

SITE VERIFICATION                  BEFORE COMMENCING CONSTRUCTION ALL DIMENSIONS, EXISTING LEVELS, FINISHED LEVELS AND
                                   ALL SITE'SERVICES ARE TO BE VERIFIED ARCHITECTURAL DRAWINGS ARE TO BE READ IN
                                   CONJUNCTION WITH ANY ASSOCIATED CONSULTANTS DRAWINGS

ACCESS & EGRESS                    PROVIDE A CONTINUOUS PATH OF TRAVEL TO AND WITHIN THE BUILDING TO PROVIDE ACCESS TO ALL
                                   REQUIRED FACILITIES. ACCESSWAYS, WALKWAYS, RAMPS AND LANDINGS SHALL HAVE AN
                                   UNOBSTRUCCTED WIDTH OF NOT LESS THAN 900mm AND BE CONSTRUCTED WITH MIN. LIP OR STEP AT
                                   JOINTS BETWEEN ABUTTING SURFACES. ALL GRADIENTS AND CROSSFALLS SHALL NOT EXCEED 1:40.

THRESHOLDS:                        ALL THRESHOLDS FOR DISABLED ACCESS MUST HAVE A MAXIMUM CONSTRUCTION STEP TOLERANCE
                                   OF 5mm WHICH IS ACCEPTABLE USING ROUNDED OR BEVELLED EDGES, PROVIDE RECESSED SLIDING
                                   DOOR FRAMES WHERE REQUIRED. - GENERALLY 20mm TO 100MM STEP AS SHOWN ON DRAWINGS

FIRE HAZARD PROPERTIES:            ALL MATERIALS AND ASSEMBLIES MUST COMPLY WITH SPECIFICATION 3.7.1 OF THE BCA FOR CLASS 10A
                                   BUILDINGS.

ROOF WATER                          DISCHARGED TO EXISTING STORMWATER SYSTEM as per as 3500.3

TERMITE BARRIERS                    AS 3660.1
                                                                                                                                                                                                                                               2,855      3,349
                                                                                                                                                                                                35.5 m

                                                                                                                                                                                                                                                         0
                                                                                                                                                                                                                                                         0
                                                                                                                                                                                                                                                         N


                                                                                                                                                                                                                                                         P0




                                                                                                                                                                  Plunge Pool


                                                                                                                                               L1
                                                                                                                                                                                                35.5 m



                                                                                                                                                                                                                                                         Proposed roof terrace
                                                                                                                                                                                                                                                         over exst'g deck
                                                                                                                                                                                            Site Plan
                                                                                                                                                                                         SCALE 1:200

                                                                                                                                                                                        0                5m
                                                                                                                                                                                                                                                   Building Approval
DESIGN / DRAWN :
                                                                                                                                                                                                          A           Building Approval           28-10-11        ( not for construction )
                                                  FIGURED DIMENSIONS TO TAKE PRECEDENCEOVER SCALED MEASUREMENTS,
               ROBERT PATTERSON
                                                                                                                      Tony & Leslie Melville    Proposed Additions to Residence at No.34 Belmour Tce          sk-02   Preliminary Approval        24-10-11

DIID           QBSA Lic.No. 1095554
               m 0401 394 964
               E: robert@@designtodetaiI.com.au
                                                  VERIFY ALL ON SITEDIMENSIONS AND LEVELS PRIOR TO THE COMMENCEMENT
                                                  OF ANY CONSTRUCTION. CONTRACTOR TO NOTIFY DESIGNER IMMEDIATELY
                                                  OF ANY DISCRFPENCIES.
                                                                                                                      CLIENT                    JOB DESCRIPTION                   Sunshine Beach , Qld
                                                                                                                                                                                                              sk-0I
                                                                                                                                                                                                              ISSUE
                                                                                                                                                                                                                      Preliminary A pp roval
                                                                                                                                                                                                                          DESCRIPTION
                                                                                                                                                                                                                                                  21-10-11
                                                                                                                                                                                                                                                  DATE
                                                                                                                                                                                                                                                                  A3
                                                                                                                                                                                                                                                              SEIT SIZI,
                                                                                                                                                                                                                                                                             1118
                                                                                                                                                                                                                                                                            DWG NO.
                                                                                                                                                                                                                                                                                             01

Page 10

                                                  2,400                        4,355
                   314
                    , 0            75>y
                                                                                                 4
                                                                                                                                                                                                                100 g,     2
                                                                                                                                                                                                                           2000


                                                                                                     dp '-


                                                                                                          0
                                                                                                          0                                                                                                                                rendered CFC trim to
                                                                                                          N                                                                                                                                inner stair void floor edge.
                                                  t


         & Meals




                   Living rm
                                                                                                                                                                                                                                           fascia gutter to match exst'g

                                                                                                                                                                                                                                           raked parapet wall.
                                                                                                                                                                                                                                           roof to butt into and
                                                                                                                                                                                                                                           flash up and over



                                                                                                                                                                                                                                           non-slip tiles over w/proofing applied to
                                                                                                     dp                                                                                                                                    20mm CFC sheeting on timber joists.
                                                                   .1,500
                                                                                                                                                                                                                                           1m High Balustrade to match existing



                   8.450                                     75

                   8.525                                               2,255            210
                                                                                         , 0




                                                       Exist'g upper floor plan                                                                                                               Proposed roof terrace plan
                                                                                                                                                                                              SCALE 1:100
                                                      SCALE 1:100
                                                                                                                                                                                          0                                       5m
                                                  0                                            5m




                                                                                                                                                                                                                                                Building Approval
DESIGN ' DRAWN :                                                                                                                                                                                            A       Building Approval          28-10-11            ( not for construction )

                                                      FIGURED DIMENSIONS TO TAKE PRECEDENCEOVER SCALED MEASUREMENTS,                                                                                        sk-02   Preliminary Approval       24-10-11
               ROBERT PATTERSON                                                                                           Tony & Leslie Melville Proposed Additions to Residence at No.34 Belmour Tce
               QBSA Lic.No. 1095SS4                   VERIFY ALL ON SITEDIMENSIONS AND LEVELS PRIOR TO THE COMMENCEMENT
                                                                                                                                                                                                            sk 01   Preliminary Approval       21-10 11            A3         1118
               m : 0401 394 964                       OF ANY CONSTRUCTION. CONTRACTOR TO NOTIFY DESIGNER IMMEDIATELY
                                                                                                                          CLIENT               JOB DESCRIPTION                    Sunshine Beach, Qld                                                          SHT SIZE.     DWG NO.
                                                                                                                                                                                                                                                                                              02
                                                                                                                                                                                                            ISSUE        DESCRIPTION           DATE
               E : [email protected]       OF ANY DISCREPENCIES.

Page 11

                                                                                                                                                                                                                                                                               Parapet wall at roof gable.
                                                                                                                                Parapet wall at roof gable.                                                                                                                    C.bond flashing over.
                                                                                                                                Rendered FC to match exst'g.                                                                                                                   Rendered FC cladding to


                             approx.
                                        -heightine
                                                                                         Rendered FC cladding
                                                                                     F_ to match exst'g
                                                                                                                                Painted zinc capping

                                                                                                                           r- Proposed Roof Terrace
                                                                                                                                                                                                           a PProx.
                                                                                                                                                                                                                      8.5m m°x' height tin
                                                                                                                                                                                                                                             e
                                                                                                                                                                                                                                                                      F        treated timber wall framing
                                                                                                                                                                                                                                                                               to match exst'g




                  +5.20
                                                                                                                           pfd                   gutter

                                                                                                                                                                +5.20                                    +5.20
                                                                                                                                                                                                                                                                                                        Extend root

   2 Roof & Terrace Plan                                                                                                                                        2 Roof & Terrace Plan    2 Roof & Terrace Plan
                                                                                               exs'tg 100 sq
                        exs'tg hwd beam 240 x 45                                                                                                                                                           P/Coated alumin. spiral stair _
                        replaced with 260 x 65 lam.                                            hwd posts                                         Proposed spiral stair
                                                                                                                                                                                                           installed to manufac. spec.
                        hwd beam C2 H3


                        +2.80                                                                                                                                   +2.80                                    +2.80
            1 First Floor Plan                                                                                                                                  1 First Floor Plan           1 First Floor Plan


                                                                                                                                                  Exst'g h'rail & decking                                                                                                                     Exst'g 245 x 45
                                                                                                                                                                                                                                                                                              hwd beam



                   ±0.00                                                                                                                                        ±0.00                                   ±0.00
     0 Ground Floor Plan                                                                                                                                        0 Ground Floor Plan       0 Ground Floor Plan
                                                                                                                                                                                                                                    line
                                                                                                                                   Structural engineer to check                                           opprox. exsl
                       approx. exst'g ground line                                                                                  timber posts joint and provide
                                                                                                                                   detail if strengthening required.
                                                                                Elevation 1                                 exs'tg hwd beam 240 x 45
                                                                                                                                                                                                                                                 Elevation 3
                                                                               SCALE 1 : 100                                                                                                                                                     SCALE 1100




                                                                                                                                                                                                                                                                   °pprpX.
                                                                                                                                                                                                                        ridgeline of roof extended                             B.Sm
                                                                                                                                                                                                                                                                                      r
                                                                                                                                                                                                                        to make gable that butts                                                    er9ht ffn^
                                                                                                                                                                                                                        into new wall                                           low wall.
                                                                                                                                                                                                                                                                                r ndered F          cladding

                                                                                                                                                                                                                                                                                                    - Proposed Roof Terrace
                                                                                                                                                                                                                                                                                               CD

                                      +5.20                                                                                                                                                                                                                                                           FC with render finish         +5.20
                      2 Roof & Terrace Plan                                                                                                                                                                                                                                                           to-match house --.-           2 Roof & Terrace Plan
                                                                                                                                                                                                                                                                                  fIG SOH I            Proposed spiral stair case
                                                                                                                                                                                                                                                                                                       beyond



                                      +2.80
                          1 First Floor Plan
                                                                                                                                                                                                                                                                                          9q           Existing deck
                                                                                                                                                                                                                                                                                                                                    +2.80
                                                                                                                                                                                                                                                                                                                                    1 First Floor Plan




                                    ±0.00                                                                                                                                                                                                                                                                                           ±0.00
                       0 Ground Floor Plan                                                                                                                                                                                                                                                                                          0 Ground Floor Plan


                                                                                                                                                                                                                                                                                                       °Or



                                                                                                                                                                                                                               Elevation 2                                                                                  rlaline

                                                                                                                                                                                                                              SCALE 1:100



DESIGN I DRAWN :
                                                                                                                                                                                                                                                                                                               Building Approval
                                                                                                                                                                                                                                                     A          Building Approval                            28-10-11          not for construction 1
                                                       FIGURED DIMENSIONS TO TAKE PRECEDENCEOVER SCALED MEASUREMENTS,
                      ROBERT PATTERSON
                                                                                                                                    Tony & Leslie Melville Proposed Additions to Residence at No.34 Belmour Tce                                      s k - 02   P re li m i nary A pprova l                  24 - 10 - 11
                      QBSA Lic.No. 1095554             VERIFY ALL ON SITEDIMENSIONS AND LEVELS PRIOR TO THE COMMENCEMENT
                                                                                                                                                                                                                                                     sk-01      Preliminary Approval                         21-10-11         A3         11 18
                      m : 0401 394 964                 OF ANY CONSTRUCTION. CONTRACTOR TO NOTIFY DESIGNER IMMEDIATELY
                                                                                                                                    CLIENT                             JOB DESCRIPTION                            Sunshine Beach , Qld               ISSUE          DESCRIPTION                              DATE           SHT SIZE.    DWG NO.
                                                                                                                                                                                                                                                                                                                                                         03
DESIGN to   D ETAIL   E: robes deslgntodetall.com.au   OF ANY DISCREPENCIES.

Page 12

                                                                                                                              Zinc or c/bond parapet flashing                         90x45MGP12
                                                                                                                              / wall capping paint to to match
                                                                                                   extend exst'g ridge line                                                           Rendered FC sheeting over
                                                                                                                                                                                      sarking on treated timber
                                                                                                                                                                                      framed wall
                                                                                                                                                                                      fall tiled & w/proofed
                                                                                                                                                                                      CFC floor to edge
                                                                                                                                                                                                               n

                                                                                                                                                                                                                                                                                                  alc




                                                                                                                                ^            \
                                                                                                                                                          -
                                                                                                                                                                                                                       roposd                           1m H P/Coated alumin.
                                                                                                                                                               M1                                                    roof terr 6 ce                     Balustrade to match exist'g
                                                                                                                                                                                                                                                        No gaps greater than 125mm

                                                                                                                                                                                                                                                       suspended timber floor
                                                                                                   exst'g roof
                                                                                                                                                                                                                                                       framing with 16mm FC flooring over.
                                                                                                                                                                                                                                                       W/proofed with fibre glass system.
                                                                                                                                       existing girder truss                                                                                           Non-slip Tiled finish
                                                                                                                                       check size on site
                                                                                                                                                                                                                                                       provide continuous drip groove
                                                                                                                                                                                                                                                       to u/side of over hanging tile
                                                                                                                                                                                                                                                        rendered FC cladding
                                                                                                                                                                                                                                                       to match exst'g                           oN
                                                                                                                                                                                                                                                                                                 N
                                                                                                                                                                                                                                                       fascia gutter
                                                                                                                                    structural engineer to confirm                                                                                                                        0      0
                                                                                                                                                                                                                                                        existing 245 x 45
                                                                                                                                    weight bearing capacity of                                                                                          HWD Beam removed & replaced       N
                                                                                                                                    exst'g timber girder truss
                                                                                                                                                                                                                                                        with 260 x 60 laminated hwd beam.
                                                                                                                                                                                                                                                        2x M12 bolt fixings at ea. post

                                                                                                                                                                                                                                                       existing 100 HWD posts

                                                                                                                                                                                                                                                       6mm CFC soffit lining
                                                                                                                                                                                                                                                       on battens to match existing
                                                                                                                                                                                                                                                       flushed with sel. paint finish




                                                                                                                                                                                                                                                       P/Coated alumin. spiral stair
                                                                                                                                                                                                                                                       installed to manufac. spec.
                                                                                                                                                                                                                                                       no gaps greater than 125mm           0    0
                                                                                                                                                                                                                                                                                            N    N
                                                                                                                                                                                                                                                                                            N    N

                                        exst'g       ouse

                                                                                                                                                                                                                                                      Exst'g h'rail




                                                                                                                                                                                                                                                       Exst'g deck
                                                                                                                                                                                                                   e $f'g deqk



                                                                                                                                                                                                                                                      Engineer to check post joint
                                                                                                                                                                                                                                                      and provide strengthening
                                                                                                                                                                                                                                                      detail if req'd


                                                                                                                                                                                                                                                       Existing HWD Beam
                                                                                                                                                                                                                                                                                        Section A
                                                                                                                                                                                                                                                       240 x 45 retained                SCALE 1 :20




DESIGN / DRAWN
                                                                                                                                                                                                                                                                                 Building Approval
                                                                                                                                                                                                                                               uilding Approval                 28-10-11        ( not for construction

                 ROBERT PATTERSON                   FIGURED DIMENSIONS TO TAKE PRECEDENCEOVER SCALED MEASUREMENTS,
                                                                                                                                                                                                                                      sk-02   Preliminary Approval              24-10-11
                                                                                                                                Tony & Leslie Melville Proposed Additions to Residence at No.34 Belmour Tce
DIID             QBSA Lic.No. 1095554
                 m : 0401 394 964
                 E : [email protected]
                                                    VERIFY ALL ON SITEDIMENSIONS AND LEVELS PRIOR TO THE COMMENCEMENT
                                                    OF ANY CONSTRUCTION. CONTRACTOR TO NOTIFY DESIGNER IMMEDIATELY
                                                    OF ANY DISCREPENCIES.
                                                                                                                                CLIENT                              JOB DESCRIPTION                           Sunshine Beach, Qld
                                                                                                                                                                                                                                      sk-01
                                                                                                                                                                                                                                      ISSUE
                                                                                                                                                                                                                                              Preliminary Approval
                                                                                                                                                                                                                                                 DESCRIPTION
                                                                                                                                                                                                                                                                                21-10-11
                                                                                                                                                                                                                                                                                DATE
                                                                                                                                                                                                                                                                                                A3

                                                                                                                                                                                                                                                                                             SHT SIZE.
                                                                                                                                                                                                                                                                                                          1118

                                                                                                                                                                                                                                                                                                          DWG NO.
                                                                                                                                                                                                                                                                                                                         04

Page 13

                                                                                                                                                                                                   1100 h timber framed wall
                                                                                                                                                                                                   (rakes up to ridge)
                                                                                                                                                                                                   90 x 45 MGP12 H3.
                                                                                                                                                                                                   Sarking behind
                                                                                                                                                                                                   FC cladding & Zinc capping
                                                                                                                                                                                                                    Existing 190 x 45
                                                                                                                                                                                                                    HWD Pitching Beam




                                                                                                                                                                                                                   Bearer 1 : 260 x 65 Hyne 17C H3 Treated
                                                                                                                                                                                  section                          Floor Joists : 145 x 50 F 14 USHWD C2 H3



                                                                                                                                                                                                                                                                          Wind Classification N3

                                                                                                                                                                                                                                                 TIE-DOWN AT POSTS :
                                                                                                                                                                                                                                                 2x M12 GALV. BOLT FIXINGS (RECESSED 10mm)
                                                                                                                                                                                                                                                 THROUGH TOP OF EA POST AND BEARER

                                                                                                                                                                                                                                                 BRACING :
                                                                                                                                                                                                                                                 NOTCH ALL POSTS TO BEARER
                                                                                                                                                                                                                                                 MIN, 20mm 2x M16 GAL. BOLT FIXINGS.

                                                                                                                                                                                                                                                 NOTE:
                                                                                                                                                                                                                                                 ALL EXPOSED TIMBER TO BE MIN.
                                                                                                                                                                                                                                                 DURABLITY CLASS 2 TREATED TO H3




                                                                                                                                                                   Proposed roof terrace
                                                                                                                                                                   floor framing plan
                                                                                                                                                                   SCALE 1 :100

                                                                                                                                                               0                                          5m




                                                                                                                                                                                                                                                                Building Approval
DESIGN / DRAWN :                                                                                                                                                                                                          A        Building Approval           28-10-11      ( not for construction )
                                                  FIGURED DIMENSIONS TO TAKE PRECEDENCEOVER SCALED MEASUREMENTS,                                                                                                          sk-02    Preliminary Approval        24-10-I1
               ROBERT PATTERSON
                                                                                                                      Tony & Leslie Melville Proposed Additions to R esidence at No.34 Belmour Tce
DIID           QBSA Lic.No. 1095554
               m : 0401 394 964
               E: robertrmdesigntodetall.com.au
                                                  VERIFY ALL ON SITEDIMENSIONS AND LEVELS PRIOR TO THE COMMENCEMENT
                                                  OF ANY CONSTRIIC I ION. CONTRACTOR TO NOTIFY DESIGNER IMMEDIATELY
                                                  OF ANY DIS(RLPIN( IFS.
                                                                                                                      CLIENT                J OB DESCRIPTION                                S u n s hi ne Beach , Qld
                                                                                                                                                                                                                          sk -01
                                                                                                                                                                                                                          ISSUE
                                                                                                                                                                                                                                   Preliminary Approval
                                                                                                                                                                                                                                      DESCRIPTION
                                                                                                                                                                                                                                                               21-10-II
                                                                                                                                                                                                                                                               DAIS
                                                                                                                                                                                                                                                                             A3
                                                                                                                                                                                                                                                                            SHI SIZE.
                                                                                                                                                                                                                                                                                        1118
                                                                                                                                                                                                                                                                                        DWG NO.
                                                                                                                                                                                                                                                                                                   F    q,

Page 14

                         Compliance Certificate for building Design or
                                       Specification                                                                                            15
NOTE                                                   This is to be used for the purposes of section 10 of the Building Act 1975 and/or section 46 of the
                                                       Building Regulation 2006.
                                                       RESTRICTION: A building certifier (class B) can only give a compliance certificate about whether
                                                       building work complies with the BCA or a provision of the QDC. A building certifier (Class B) can
                                                       not give a certificate regarding QDC boundary clearance and site cover provisions.


1. Property description                                Street address Include no., street, suburb/ locality & postcode
This section need only be completed if                  34 Belmore Terrace
details of street address and property
description are applicable.                             Sunshine Beach                                                          Postcode 4567
EG. In the case of (standardigeneric)
                                                       Lot & plan details (attach list if necessary)
pool designishell manufacture and/or
patio and carport systems this section
may not be applicable.
                                                       In which local government area is the land situated?
The description must identify all land the               Sunshine Coast Regional Council
subject of the application.
The lot & plan details (eg. SP ! RP) are
shown on title documents or a rates notice.
if the plan is not registered by title, provide
previous lot and plan details
2. Description of components certified
Clearly describe the extent of work covered by
                                                        Proposed roof top terrace consisting of tiled timber framed deck built over.
this certificate, e.g. all structural aspects of the
steel roof beams,




                                                        Items not certified: Windows and Doors, Balustrading, Pool Fencing
                                                                                 Pre-fabricated Roof Trusses, Bracing & Girder Truss Support
                                                                                 Roof sheeting or Tiles


3. Basis of certification
                                                        •     AS 1170.1                   Dead and Live Loads and load Combinations
Detail the basis for giving the certificate and the
extent to which tests, specifications, rules.           •     AS 4055                     Wind Loads for Houses
standards, codes of practice and other                  •     AS 1720                     Timber Structures
publications, were relied upon.                         •     AS 1684.2                   Residential Timber Framed Construction
                                                        •     AS 2870                     Residential Slabs and Footings
                                                        •     AS 3600                     Concrete Structures.


                                                        Loading Criteria:

                                                        Wind Loading: Region: B      Terrain Cat: 2.5    Topographic Class: TI
                                                                       Shielding: PS     Design Wind Classification: N3

                                                        Floor Loading: Internal: 1.5 kPa                   Balconies: 3.0 kPa




       LOCAL GOVERNMENT USE ONLY
         Date receN,,d                                                                         Referarce iiumberts                              Approved form IS
                                                                                                                                                 Version 2 01106

Page 15

                     Form 15 continued
4. Reference documentation
Clearly identify any relevant documentation,
                                                     Drawing numbers:- Design to Detail - 1118 sheets 1 thru 5
e.g. numbered structural engineering plans.




                                                                                              - - - - - ----------------------- - -


5. Building certifier reference number              Building certifier reference number



6. Competent person details                         Name (in full)
A competent person for building work, means a
person who is assessed by the building certifier
                                                     Sean Richardson
for the work as competent to practise in an
aspect of the building and specification design,
                                                    Company name (if applicable)                                      Contact person
of the building work because of the individual's     SCG Consulting Engineers                                          Sean Richardson
skill, experience and qualifications in the
aspect. The competent person must also be           Phone no. business hours              Mobile no.                                     Fax no.
registered or licensed under a law applying in       07 5455 5604                                                                         07 5455 5696
the State to practice the aspect.
                                                    Email address
If no relevant law requires the individual to be
licensed or registered to be able to give the        [email protected]
help, the certifier must assess the individual as
having appropriate experience. qualifications or
                                                    Postal address
skills to be able to give the help.                  PO Box 1661
If the chief executive issues any guidelines for     Noosa Heads Q                                                                         Postcode 4567
assessing a competent person, the budding
certifier must use the guidelines when              Licence or registration nu      if applicable)
assessing the person.
                                                    LRPEQ 5835

7. Signature of competent person                    Signature                                                                    Date
This certificate must be signed by the individual                                                                                     3111012011
assessed by the building certifier as competent.




      The Building Act 1975 is administered by the
                                                                                                                                Queensland Government
      Department of Infrastructure and Planning                                                                                 Department of Infrastructure and Planning

Used in these records

About this file

File size
3.1 MB (large file)
File type
PDF

No other editions are linked here.

Original file

Log in to download the original file

REFER_ PBA11_0095 Referral Agency Response - roof top terrace - 34 Belmore Tce SUNSHINE BEACH.pdf · 3.1 MB (large file)

The download may take up to a minute.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.