Original source · versioned page text
2020-07-16 SM Agenda - Item 1 - Attachment 3 - Final Noosa Plan 2020 Part 4-6
Plans and drawings
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawn Performance Outcomes Acceptable Outcomes
PO20 AO20.1
Roof forms: The main roof of the building has a roof pitch no less than 5
(a) contribute positively to the local skyline; degrees and has minimum 600 millimetre eaves to at least 75%
of the perimeter of the building excluding where located in:
(b) complement the character of the locality and the topography
of the site; (a) the Coastal Communities local plan area; or
(c) avoid box profiles/parapets; and (b) the Noosa Heads local plan area.
(d) do not create opportunities for overlooking the private open
AO20.2
space or internal spaces of neighbourhood properties.
Development does not include roof top terraces.
AO20.3
The total width of any parapet wall does not exceed 50% of the
width of the front facarde of a building.
Safety and Amenity Table 6.3.4.3 Criteria for assessment (part)
Performance Outcomes Acceptable Outcomes
Safety and amenity
PO21 AO21.1
Development ensures that the design of the development and Buildings and structures:
operation of uses; (a) are sited and orientated to minimise the likelihood of
(a) provide a high level of amenity to users of the subject site; overlooking the private open space of adjacent residential
and uses;
(b) do not unreasonably impact on the amenity enjoyed by (b) avoid reduction of sunlight to at least 40% of the private
users of adjoining or nearby premises, including privacy open space areas of any adjoining residences to less than
and access to sunlight. 2 hours between 9:00am and 3:00pm on any day of the
year;
Editor's note—Provisions for sill height, glazing, screening and (c) incorporate fencing, landscaping and screening to mitigate
window openings are to improve the residential amenity for impacts on adjoining residential uses.
occupants. Thermal performance requirements are contained in Editor's note—refer to figure AP31A and figure AP32A
Queensland Development Code MP4.1 Sustainable Buildings.
Energy efficiency requirements are contained in the National AO21.2
Construction Code. Dwellings and visitor accommodation units established as part of
a mixeduse development incorporate suitable noise attenuation
measures to reduce amenity impacts from business or
entertainment uses.
AO21.3
Transparent doors and windows are designed and located so
they do not directly face transparent doors or windows or the
private open space areas of other dwellings or accommodation
units within 10 metres;
AO21.4
Where windows, balconies, terraces, verandahs or decks
overlook or have the potential to overlook the private open space of
nearby properties or view into habitable room windows within 10
metres—
(a) windows have a sill height of not less than 1.7 metres
above finished floor level;
(b) windows and other openings are permanently screened to
a minimum height of 1.7 metres to avoid overlooking;
(c) windows and doors use translucent glazing to obscure
NOOSA PLAN 2020 Page 44 of 48
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
Large file: the download may take up to a minute.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.