Council archive · source document
Response to Info Request -Attachment 7 - Bushfire Report MCU18-0015 & RAL18-0001 · MCU18/0015
3.3 Fuel Accumulation Assessment – Fuel Areas 1 and 2 Eastern Slope
Figure 6. Fuel Accumulation Assessment – Fuel Areas 1 and 2
Fuel hazard estimate Assessment according to Hines et al 2010
th
Date: 11 April 2018
Layer Rating Description / Comments Equivalent fuel
load
t/ha
Surface and near surface Low Low litter bed 10 mm, with Moderate NS fuels, mainly 6
weeds – purple succulent, asparagus fern, fishbone fern,
mother-of-millions.
Elevated Moderate Brushbox, cypress, hoop pine recruiters and umbrella 2-3
palm … most fuel at the top of the layer
Bark High Allowance for involvement of Cypress. Cypress 2
predominates, with some Celtis.
Overall rating Very High 11t/ha
Table 1. Fuel Assessment Fuel Areas 1 and 2.
The Department of Natural Resources, Mines and Energy maps the vegetation present as a combination of
(70%) RE12.2.1 and (30%) RE12.2.5 with default total available fuel loads of 4.5t/ha and 24.1t/ha respectively.
Site assessment supports their vegetation classification, and working on 70% of 4,5t/ha plus 30% of 24.1t/ha, a
value of 10.38t/ha is suggested. This aligns with the fuel load assessed above. For the purposes of site specific
fire modelling in accordance with Method 2 under AS3959-2009) a total available fuel value of 11t/ha (6t/ha of
which is surface and near surface fuel) is applied to site specific fire modelling in Section 6.
Report compiled by Bushfire Risk Reducers for Innovative Planning Solutions Page 11
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Response to Info Request -Attachment 7 - Bushfire Report MCU18-0015 & RAL18-0001.pdfRelated documentApplication case desk ↗
About this file
- File size
- 8.6 MB (large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take up to a minute.