Original source · versioned page text
PBDHEXP arch plans- MCU16.004.REC16.0009 -MINOR CHANGE - 09.09.22
Plans and drawings
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawnCode Item Description Code Item Description
CLA-1 Cladding at new and Fibre cement sheet cladding to match existing. RFS-1 New roof to zones Steel and timber framed roof to Engineer’s detail.
infill walls as Finish: to match existing 1,12,13 Sheet roof: Lysaght Trimdek profiled roof sheeting 0.6 BMT
indicated and associated flashings as detailed over engineered roof
CLA-2 Cladding at new and 6 mm thick fibre cement sheeting. FC sheets to be fixed to structure.
infill walls as timber infill framing (where required) Roof Safety: Allow for 3 x safety anchors for roof
indicated maintenance and repair
Finish: ‘0 voc’ acrylic exterior paint - low sheen Finish: Colorbond Ultra
Finish: PT-5 Colour: ‘Surfmist’
MTL-1 Metal other than Custom folded sheet metal flashing to sizes and shapes Insulation: INS-1
aluminium, steel or shown on Architects Drawings Refer to Architectural Gutters: RWG-1
stainless steel Drawings for extent, sizes, shapes and details. RFS-2 New roof over zones Steel and timber framed roof to Engineer’s detail.
Note: All flashings to have crush fold on ends to prevent 10 and 14 as Sheet roof: Lysaght Trimdek profiled roof sheeting 0.6 BMT
corrosion on cut sheets. Allow for additional compressed indicated and associated flashings as detailed over engineered roof
fibre cement substrates as needed. structure.
Material: Colorbond sheet steel Roof Safety: Allow for 3 x safety anchors for roof
Colour: To match adjacent roof. maintenance and repair
All dissimilar metals to be separated as per Engineers Finish: Colorbond Ultra
specifications Colour: ‘Surfmist’
PS-1 Painted/ Coated Powdercoat finish Dulux Duratec Zeus system finished film Insulation: INS-1
Aluminium thickness to suit coastal environment. Gutters: RWG-2
Colour: to match Colorbond “Monument” generally (unless RFS-3 New roof over Main Steel and timber framed roof to Engineer’s detail.
noted otherwise). Entry as indicates Sheet roof: Translucent polycarbonate with “Trimdek”
PS-2 Painted Steel Painted steel in accordance with Engineers Drawings and profile
Specifications. Gutters: RWG-4
All structural steel shall be finished in accordance with AS RFS-4 New roof to zone 08 Steel and timber framed roof to Engineer’s detail.
2312-2016 and AS4100 All to match existing roof.
Steel to be hot dip galvanised and prepared prior to Gutters: RWG-3
painting. RFS-5 Concrete Roof Poured concrete as Engineers Drawings. Set-out and detailed as
Coating system shall be International Paints Epoxy 3 coat per Architects Drawings.
system Square edges with no fillets generally. V drip groove to all
1st coat: Interplus 1180: min 150 microns DFT external soffit edges.
2nd coat: Interthane 990: min 75 microns DF REN-1 Exterior walls Cement / Sand render laid to smooth trowelled surface.
3rd coat: Interthane 990: min75 microns DFT Finish: Paint PT-5
Colour: To match Colorbond “Monument” generally (unless SCN-1 Screens Custom timber battened screen to Architects detail. 100x50
noted otherwise) rough sawn hardwood timber vertical, structural twin studs
Sheen: matt @450cntrs with 30x30 horizontal battened to inside face to
PT-5 Exterior walls Exterior wall paint set out and detail. Stainless steel fixings through out.
Type: 2 coats exterior acrylic paint Timber to be beltsanded with arris edges.
Gloss: satin Species: Spotted Gum or pre-approved alternative similar
Colour: Monument Australian Species
Colour code: TBC Grade: Select
PT-6 Exterior soffits Exterior ceiling paint Timber finish: PT-10
Type: 2 coats exterior acrylic paint Notes: Refer to Architectural Drawings for Extent.
Gloss: flat SCN-2 Screens Custom timber screen - reuse iron bark deck boards, cut to
Colour: to match cladding 50X50 battens, 100X50 studs - 3000mm ht
Colour code: TBC
PT-10 Exterior / Interior Exterior timber finish - set out as shown
timber decking / Type: 2 coats exterior timber finish Species: existing 200X50 iron bark deck boards
cladding Gloss: matt
Colour: Clear
SCHEDULE OF FINISHES AND
FLEXURE CLIENT USE FIGURED DIMENSIONS. ISSUE AMMENDMENT Title
NOOSA COUNCIL DO NOT SCALE FROM THE
DRAWINGS. CONFIRM ALL
date details MATERIALS
GRANT CALDER ARCHITECTURE AND URBAN DESIGN Date 09 September 2022
DIMENSIONS ON SITE PRIOR
TO CONSTRUCTION OR
FABRICATION. IT REMAINS Scale 1:200@A3
PROJECT PEREGIAN BEACH DIGITAL HUB - EXPANSION THE CONTRACTORS
RESPONSIBILITY TO ENSURE Grant Calder
21 Bursaria Street Peregian Beach Drawn
ph: 0488 084 184
253, Lot 95 SP 137431 and 255 David low Way Lot 1 SP 215942, COMPLIANCE WITH ALL
RELEVANT CODES AND
email - [email protected] REGULATIONS IS Checked Peter Kolasa
Registered Architect- BOAQ 3112 MAINTAINED AT ALL TIMES.
Drawing No PBHUB AD01. 02 Issue - 0
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
Large file: the download may take up to a minute.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.