Fencing Details URB-P0003847-000-SP-APPENDIX(2of2)-240719

          HANDI-MATE ™ HM6 HINGED DOOR SHED INSTALLATION GUIDE


Using Trestles or Blocks to support the Sheets, lay down the Corner Wall Sheet and Wall Sheet (Figure 4.1).



             Sheet ‘Overlap’
        Sheet ‘Underlap’



                                                             Wall Sheet
                     Corner Wall Sheet




FIGURE 4.1


1. Fit the Wall Channel over the lapped Wall Sheets. The end of the Wall Channel should fit up against the end of the Corner
Wall Sheet (Figure 3.2).
2. Fasten through the third pilot hole of both Wall Channel ends and into the Wall Sheet crests. Fasten through the Wall
Channels and into every third Wall Sheet crest using four 10x16 Hex-Head Screws in each Wall Channel (Figure 3.2).

                                                                               10x16 Hex-Head Screw

                                                                                         Wall Channel

                                         Corner Wall Sheet




                                                                                  Wall Sheet
                                 Wall Channel




   1.                                                  2.                           2.




FIGURE 3.2



SECOND SIDE WALL ASSEMBLY
Repeat steps in Figures 3.0 - 3.2 to make a second Side Wall Assembly.