Fencing Details URB-P0003847-000-SP-APPENDIX(2of2)-240719

         HANDI-MATE ™ HM6 HINGED DOOR SHED INSTALLATION GUIDE


Refer to Sheet layout in Figure 7.2. Lay the next Roof Sheet onto the Ridge Beam and Wall Channel, ensuring the overlap end of
the Roof Sheet is facing the front of the shed (Figure 7.6).
1. Ensure the Roof Sheet is hard against the step of the Ridge Beam. Fasten five 10x16 Hex-Head Screws with Neo Washers
through the pans of the Roof Sheet and into the Ridge Beam (Figure 7.6).
2. Fasten five 10x16 Hex-Head Screws with Neo Washers through the pans of the Roof Sheet and into the Wall Channel
(Figure 7.6).
Install the opposing side Roof Sheet in the same manner.




                                                                                                    Ridge Beam
                                       Roof Sheet




             10x16 Hex-Head Screw
             with Neo Washer




                        Wall Channel




 1.                                                 2.




FIGURE 7.6