Council archive · source document
Part 3 - A - Information Response Final · OPW20/0118
In this location, the sand leading up to the wall is much higher than typically found in other areas so the
original revetment wall does not sit 500mm above the sand height as suggested by Council. The images
below show the location of the revetment wall at nearby properties confirming that the sand level is
much higher up the original revetment wall and in some cases, completely covers the top of the wall.
Masonry wall built off the
top of the revetment wall
Top of original
revetment wall
Scouring to base of
wall
Figure 2: Original wall on nearby property in Mossman Court
Just visible top of Top of original
revetment wall with revetment wall
masonry wall above covered by sand
Scouring to base of wall
Figure 3: Original wall on other nearby properties in Mossman Court
It is evident that the tidal levels come right up to (and above) the top of this original wall level and
evidence of scouring is also noticeable. It seems that many properties in the area have built additional
masonry walls above this to keep the adjoining property safe from tidal inundation. With HAT at
1.08m (AHD) this evidence shows that the tides come over the height of the revetment wall at RL 0.9m
AHD.
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Part 3 - A - Information Response Final.pdfRelated documentApplication case desk ↗
About this file
- File size
- 859 KB (small file)
- File type
No other editions are linked here.