Original source · versioned page text
Approved Plans MCU21-0003 & OPW20-0106
Plans and drawings
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawn -
NOOSA COUNCIL
APPROVED PLAN
MCU21/0003 & OPW20/0106
8 FEBRUARY 2021
Long View ASSOCIATED CONSULTANTS
L Consulting Engineers Pty. Ltd.
V Post:
ABN:
PO Box 963 Cooroy QLD 4563
98 867 060 985
Mobile: 0414 681 676
Email: [email protected]
Internet: www.longviewconsulting.com.au
PROJECT
PROPOSED NEW JETTY PROJECT
SHARED JETTY ON BOUNDARY SITE
8 RAVENWOOD DRIVE, NOOSA HEADS
& 11 KEY COURT, NOOSA HEADS
LongView PROJECT No.: CLIENT
20.001-002 MICHAEL ELSEGOOD & HUGH ENGLISH
LOCALITY PLAN
NOT TO SCALE
DRAWING SCHEDULE & TRANSMITTAL
REV. REV. REV. REV.
DRAWING No. TITLE DATE: 11/06/20 22/06/20 18/09/20 14/10/20
S01 COVER SHEET (DRAWING SCHEDULE & TRANSMITTAL) C1 C2 C3 C4
S02 STRUCTURAL NOTES SHEET C1 C1 C1 C1
S03 SITE PLAN, FRAMING PLAN, ELEVATIONS C1 C2 C3 C4
S04 JETTY FRAMING DETAILS C1 C1 C2 C2
ISSUE "P1" DENOTES PRELIMINARY ISSUE 1
ISSUE "A", "B" DENOTES APPROVAL / TENDER ISSUE
ISSUE "C1" DENOTES CONSTRUCTION ISSUE 1
© THIS DRAWING IS PROTECTED ASSOCIATED CONSULTANTS PROJECT DRAWING TITLE
UNDER COPYRIGHT IN
ACCORDANCE WITH
AGREEMENT BETWEEN LONG
VIEW CONSULTING ENGINEERS
4 CONSTRUCTION ISSUE C4 F.M.
NOOSA JETTY BUILDERS
JoB No: 1288
SHARED JETTY ON BOUNDARY
Long View PROPOSED NEW JETTY, ON SHARED BOUNDARY DRAWING SCHEDULE & TRANSMITTAL
8 RAVENWOOD DRIVE, & 11 KEY COURT, NOOSA HEADS
Pty. Ltd. AND THE CLIENT AS
L Consulting Engineers Pty. Ltd.
REVISIONS
NAMED HEREIN. EXCLUSIVE Address: 8 RAVENWOOD DRIVE,
USE IS GRANTED UNDER THE
3 CONSTRUCTION ISSUE C3 F.M. & 11 KEY COURT, NOOSA HEADS
AGREEMENT ONLY FOR THE
PROJECT. THIS DRAWING SHALL 2 CONSTRUCTION ISSUE C2 F.M. LOT 160 ON N.218.59 & V Post:
ABN:
PO Box 963 Cooroy QLD 4563
98 867 060 985
DRAWN
S.T.
CHECKED
F.M.
APPROVED DATE
14/10/2020
SCALE BAR DRAWING SCALES
1:1
DRAWING SIZE
A1 ORIGINAL
NOT BE CONSTRUCTED UNLESS LOT 169 ON N.218.58 Mobile: 0414 681 676
DESCRIBED AS "CONSTRUCTION 1 CONSTRUCTION ISSUE C1 F.M. Client: MICHAEL & HUGH ENGLISH Email: [email protected] DESIGNED CHECKED RPEQ / Cert. PROJECT NUMBER DRAWING NUMBER REVISION
ISSUE". Internet: www.longviewconsulting.com.au
No. DESCRIPTION REV. APP. F.M. F.M. 19951 20.001-002 S01 C4
Document Set ID: 21283229
Version: 1, Version Date: 03/11/2020
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
Large file: the download may take up to a minute.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.
Full text of the other 3 pages
Page 2
GENERAL DIMENSIONS/LEVELS TIMBER FRAMING & BRACING:
G1 STRUCTURAL DRAWINGS SHALL BE READ IN CONJUNCTION WITH THE L1. CONSTRUCTION SHALL BE SET OUT USING SURVEY BENCHMARKS PROVIDED BY COUNCIL. T1 ALL WORKMANSHIP AND MATERIALS SHALL BE IN ACCORDANCE WITH AS 1720, AS 1684
SPECIFICATION, ARCHITECTURAL, AND OTHER CONSULTANTS' DOCUMENTS. AND THE REFERENCED STANDARDS THEREIN.
L2. ALL LEVELS AND SETOUT POINTS ARE SHALL BE CONFIRMED ON SITE BY REGISTERED
G2 REFER TO THE ARCHITECTURAL DRAWINGS FOR SETOUT. NO DIMENSIONS SHALL BE SURVEYOR PRIOR TO CONSTRUCTION. ADVISE ANY DISCREPANCY BEFORE PROCEEDING. T2 ALL FRAMING, BRACING AND TIE-DOWN INFORMATION FORMS THE BASIS OF THE
OBTAINED BY SCALING FROM DRAWINGS. STRUCTURES STABILITY DOWN TO FOUNDATIONS. ALTERNATIVE METHODS SHALL
L3. DIMENSION STANDARDS: ONLY BE ACCEPTED ON APPROVAL OF THE ENGINEER.
G3 UNLESS OTHERWISE NOTED (UNO), ALL LEVELS ARE IN METRES AND ALL DIMENSIONS ARE IN - REDUCED LEVELS, CHAINAGES AND COORDINATES ARE ALL IN METRES.
MILLIMETRES. - CIVIL DRAWINGS (SKC SERIES): ALL OTHER DIMENSIONS ARE IN METRES (m). T3 PREFABRICATED TIMBER ROOF TRUSSES, PROPRIETARY FLOOR JOIST SYSTEMS
- STRUCTURAL DRAWINGS (SKS SERIES): ALL OTHER DIMENSIONS ARE IN MILLIMETRES (mm). AND ALTERNATIVE TIMBER ELEMENTS TO THOSE SHOWN ON THE ENGINEERING
G4 THE CONTRACTOR SHALL BE RESPONSIBLE FOR MAINTAINING THE STABILITY OF THE DRAWINGS ARE TO BE DESIGNED AND CERTIFIED BY THE SUPPLIER'S STRUCTURAL
STRUCTURE UNTIL ITS COMPLETION AND SHALL ENSURE THAT NO PART OF THE STRUCTURE L4. ALL LEVELS ARE TO AUSTRALIAN HEIGHT DATUM. ENGINEER. DESIGN AND INSPECTION CERTIFICATES FOR THESE ELEMENTS ARE TO BE
IS OVER-STRESSED BY EXCESSIVE LOADING. ISSUED TO THE CONTRACTOR FOR LODGEMENT WITH THE LOCAL AUTHORITY.
L5. DIMENSIONS SHALL NOT BE SCALED FROM DRAWINGS.
G5 ALL MATERIALS AND WORKMANSHIP SHALL BE IN ACCORDANCE WITH THE CURRENT VERSION T4 ALL TIMBER MEMBERS USED ARE TO HAVE A MINIMUM LEVEL OF DURABILITY AS
OF THE APPLICABLE STANDARD EXCEPT WHERE VARIED BY THE SPECIFICATION AND/OR L6. DESIGN USES DIGITAL TERRAIN MODEL GENERATED FROM THE SITE SURVEY. SOME SPECIFIED IN AS1684.2 - APPENDIX B.
DRAWINGS. APPLICABLE CODES OF PRACTICE INCLUDE BUT ARE NOT LIMITED TO THE ELEMENTS ARE INTERPOLATED AND MAY VARY FROM THE ACTUAL SITE CONDITIONS
FOLLOWING: T5 ALL HWD TIMBER SHALL BE SEASONED UNO.
AS 1163 STRUCTURAL STEEL HOLLOW SECTIONS
AS 1170 SAA LOADING CODE T6 ALL TIMBER SHALL BE FREE OF GUM VEINS, KNOTS, SHAKES, CHECKS, WANES AND ANY
AS 1554 WELDING OF STEEL STRUCTURES CONSTRUCTABILITY CONSTRAINTS: OTHER IMPERFECTIONS WITHIN CONNECTION ZONES.
AS 1664 ALUMINIUM STRUCTURES
AS 1684 RESIDENTIAL TIMBER-FRAMED CONSTRUCTION CC1. CONSTRUCTABILITY CONSTRAINTS: T7 ALL TIMBER FRAMING TO BE MINIMUM H6 TREATED UNO.
AS 1720 TIMBER STRUCTURES
AS 2159 PILING CODE A) PROTECT ALL EXISTING INFRASTRUCTURE (EG CULVERT CROSSING, PAVEMENTS, T8 EXPOSED FRAMING (TIMBER FRAMING THAT MAY BE SUBJECT TO PERIODIC WETTING):
AS 4100 STEEL STRUCTURES FENCING & ELECTRICAL POLES/WIRES) FROM ANY DAMAGE. - SHALL BE EITHER H6 PRESSURE TREATED OR DURABILITY CLASS 1
AS 4997 GUIDELINES FOR THE DESIGN OF MARITIME STRUCTURES SPECIES (MINIMUM) SAWN TIMBER (UNO)
AS 5100 BRIDGE DESIGN B) ALLOW OF LIKELIHOOD OF FLOW WITHIN THE WATERWAY: EXISTING WATERWAY ARE
BCA BUILDING CODE OF AUSTRALIA (NATIONAL CONSTRUCTION CODE) FLOODED MULTIPLE TIMES PER YEAR. PROTECT CONSTRUCTION EQUIPMENT AND T9 WASHERS SHALL BE PROVIDED UNDER ALL NUTS AND BOLT HEADS (EXCEPT CUP-HEAD
WORKS. BOLTS) BEARING AGAINST TIMBER AS FOLLOWS:
G6 ANY DISCREPANCY SHALL BE REFERRED TO THE SUPERINTENDENT FOR A DECISION BEFORE BOLT SIZE WASHER
PROCEEDING WITH THE WORK. CC2. NO WORK TO COMMENCE ON SITE UNTIL: <=M12 50X50X3.0mm
M16 57X57X4.0mm
- OFFICIAL PRE-START MEETING HELD AND PRE-START MEETING MINUTES ISSUED
G7 ALL PROPRIETARY PRODUCTS NOT DEEMED TO COMPLY WITH THE BCA SHALL HAVE M20 65X65X5.0.mm
- CONTRACTOR'S MANAGEMENT PLANS SUBMITTED (SITE, TRAFFIC, ENVIRONMENT,
THIRD-PARTY CERTIFICATION WITH RELEVANT TESTING AND SIGN-OFF BY AN RPEQ ENGINEER. >M20 75X75X6.0mm
SAFETY) FOR SUPERINTENDENT'S REVIEW.
PROPRIETARY PRODUCTS INCLUDES PREFABRICATED TRUSSES, LIGHT-GAUGE STEEL
FRAMING, FLOORING PRODUCTS, RECYCLED TIMBER AND PLASTICS, BALUSTRADES, SCREENS, T10 X….. INDICATES M12DIA ANCHOR ROD/BOLT
SHADE FABRICS, JOINERY, PARTITIONS AND OPERABLE WALLS.
T11 [X]….. INDICATES M16DIA ANCHOR ROD/BOLT
G8 REFER TO ARCHITECTS DRAWINGS FOR DETAILS OF ALL GROOVES, FILLETS, HOBS, DRIP
DRIVEN PILES:
GROOVES AND THE LIKE. T12 SB…. INDICATES STRAP BRACE ROOF BRACING FIXED TO TOP OF EACH JOIST WITH 2
P1. PILES SHALL BE CONSTRUCTED IN ACCORDANCE WITH AS2159. SCREWS. BEND STRAP BRACING OVER AT ENDS, FIX WITH 2 SCREWS TO TOP OF JOIST
G9 GIVE AT LEAST 24 HOURS NOTICE OF AN INSPECTION BEING REQUIRED FOR : AND 4 SCREWS TO SIDE FACE OF SUPPORTING MEMBER. ALL ROOFS TO BE BRACED.
P2. CONSTRUCTION CONSTRAINTS: AVOID LOADING EXISTING REVETMENT WALLS.
- PILING
- JETTY FRAMING (TIMBER) T13 ALL FASTENERS ARE TO BE GRADE A4-70 STAINLESS STEEL IN ACCORDANCE WITH
P3. DESIGN LOADS: PILES TO ACHIEVE GEOTECHNICAL CAPACITIES (VERTICAL & ISO-3506-1. EXTERNAL ANCHORS WHERE SUBJECT TO SALT AIR SHALL BE STAINLESS
- BRACING AND TIE DOWN
HORIZONTAL) SHOWN ON THE DRAWINGS STEEL A4-70:
G10 ALL FABRICATION SHOP DRAWINGS SHALL BE PROVIDED TO THE ENGINEER FOR REVIEW AND -SCREWS TO BE NO.14 TYPE 17 WITH 50MM EMBEDMENT (UNO)
P4. REQUIRED PILE POSITION TOLERANCES: -ALL JOIST HANGERS, FRAMING ANCHORS, TRIPLE GRIPS AND THE LIKE, SHALL BE
COMMENT IN A3 HARDCOPY OR PDF FORMAT.
STAINLESS STEEL. TO BE MANUFACTURED BY PRYDA OR APPROVED
PLAN POSITION: +/- 50mm AT UNDERSIDE OF EACH GROUND BEAM. EQUIVALENT, WITH 5 NO. 2.8mm DIA X 30MM
G11 ABBREVIATIONS (GENERAL):
PILE VERTICALITY: NAILS EACH LEG MINIMUM. INSTALL AS PER MANUFACTURERS SPECIFICATION.
NTS NOT TO SCALE
- WITHIN 4% FOR ALL PILES
UNO UNLESS NOTED OTHERWISE
NSOE NOT SHOWN ON ELEVATION T14 PROVIDE BLOCKING OVER SUPPORTS AT 1800 MAX CRS IN ACCORDANCE WITH AS 1684
P5. PILE TOE LEVELS ON THE DRAWINGS ARE ESTIMATED LEVELS. ACTUAL TOE LEVELS FOR TIMBER BEARERS AND JOISTS WITH D/B >= 4.
NSOP NOT SHOWN ON PLAN
SHALL BE DETERMINED DURING CONSTRUCTION BY AN RPEQ-CERTIFIED
TYP TYPICAL
GEOTECHNICAL ENGINEER. T15 FOR JOISTS WITH SPAN >3000 AND BOTTOM OF JOIST UNRESTRAINED BY CEILING
(O) OVER
(U) UNDER DIAPHRAGM:
P6. DO NOT FOUND PILES HIGHER THAN TOE LEVELS ON DRAWINGS, UNLESS APPROVED BY -PROVIDE 1 ROW OF BLOCKING BETWEEN EACH JOIST AT
CRS CENTRES
BOTH THE SUPERINTENDENT AND THE GEOTECHNICAL ENGINEER. THE MIDSPAN FOR SPANS < 4200mm
NOM NOMINAL
SUPERINTENDENT SHALL SEEK ADVICE FROM THE DESIGN ENGINEER AS REQUIRED. -PROVIDE 2 ROWS OF BLOCKING BETWEEN EACH JOIST AT
CFW CONTINUOUS FILLET WELD
THIRD POINTS FOR SPANS >4200mm
T16 FIXING LOCATIONS TO BE FIXED ACCORDING TO THE FOLLOWING MINIMUM PACINGS
DESIGN CRITERIA ALUMINIUM: (D = FIXING SHANK DIA. IN mm):
BOLTS 4D EDGE DISTANCE TO BOTH EDGES IN DIRECTION OF SHEAR LOAD
DC1 THE STRUCTURAL ELEMENTS HAVE BEEN DESIGNED FOR THE FOLLOWING LIVE LOADS A1. ALL WORKMANSHIP AND MATERIALS SHALL COMPLY WITH BEST PRACTISE ALUMINIUM 5D PITCH BETWEEN BOLTS
IN ACCORDANCE WITH AS 1170.1: LIVE LOAD REDUCTIONS ARE NOT APPLICABLE. FABRICATION AND THE CURRENT AUSTRALIAN STANDARD AS 1664. 5D EDGE DISTANCE FROM END OF ELEMENT
ELEMENT UDL CONCENTRATED A2. ALUMINIUM SECTIONS SHALL COMPLY WITH AS 1734, AS 1886 OR AS 1867. 13D MINIMUM OVERALL ELEMENT DEPTH
ROOF 0.25 kPa 1.1KN A3. ALL WELDING SHALL COMPLY WITH AS 1665.
INTERNAL FLOORS 1.5kPa A4. ALL WELDING SHALL BE CARRIED OUT USING ARGONGAS SHIELDING. WELD
DECK 2.0kPa MINIMUM SPACING, EDGE & END DISTANCES FOR NAILS AND SCREWS
CONSUMABLES SHALL BE COMPATIBLE WITH BOTH PARENT ALLOYS IN ACCORDANCE
THOROUGHFARES 4.0 kPa WITH AS AS 1665. FOR 6063-T6 USE 4043 FILLER WIRE. PLATE-TO-EXTRUSION ALLOYS
MINIMUM DISTANCE
SHALL BE WELDED USING APPROPRIATE FILLERS IN ACCORDANCE WITH WTIA
DC2 WIND LOADS HAVE BEEN DETERMINED IN ACCORDANCE WITH AS 1170.2 BASED ON: TECHNICAL NOTES WHERE NOT COVERED BY AS 1665.
IMPORTANCE LEVEL 2 SPACING TYPE HOLES FOR HOLES FOR
A5. ALL WELDS SHALL BE A MINIMUM 5mm CONTINUOUS FILLET WELD ALL ROUND,
REGION B NAILS NOT NAILS PREBORED SCREWS
UNLESS NOTED OTHERWISE.
ULTIMATE WIND SPEED 51 m/s PREBORED TO 80% DIA.
A6. ALUMINIUM EXTRUSIONS SHALL BE STRUCTURAL GRADE ALLOY:- EXTRUSIONS 6063-T6
SERVICEABILITY WIND SPEED 39.0 m/s END DISTANCE 20D 10D 10D
UNLESS NOTED OTHERWISE.
TERRAIN CATEGORY 1.5 EDGE DISTANCE 5D 5D 5D
A7. ALUMINIUM PLATE IS TO BE WROUGHT GRADE ALLOY 5083 H116.
ALONG-GRAIN SPACING 20D 10D 10D
A8. ALL STEEL AND STAINLESS STEEL BOLTS AND ALL OTHER FIXINGS MUST BE ISOLATED
DC3 EARTHQUAKE LOADING HAS BEEN DETERMINED IN ACCORDANCE WITH AS 1170.4 BASED CROSS-GRAIN SPACING 10D 3D 3D
FROM ALUMINIUM USING NYLON OR SIMILAR APPROVED PACKERS/GASKETS, AND
ON: WASHERS WITH SHANK COLLARS.
ACCELERATION COEFFICIENT 0.06 A9. SHOP DETAIL DRAWINGS ARE TO BE SUBMITTED TO THE ARCHITECT AND ENGINEER
SITE FACTOR 1 FOR REVIEW. APPROVAL IS TO BE OBTAINED FROM THE COUNCIL, THE ARCHITECT AND
IMPORTANCE LEVEL 1 THE ENGINEER, PROIR TO COMMENCING FABRICATION.
STRUCTURE TYPE
DESIGN CATEGORY EDC1
DC4 FIRE RESISTANCE LEVELS OF STRUCTURAL ELEMENTS HAVE BEEN TAKEN AS FOLLOWS: TEMPORARY WORKS:
ELEMENT FRL (mins)
COLUMNS -/-/-
BEAMS -/-/- T1. MAINTAIN THE WORKS IN A SAFE CONDITION. ENSURE STRUCTURES ARE NOT
WALLS -/-/- OVER-STRESSED AT ANY TIME. TEMPORARY ROAD SURFACES SHALL BE TRAFFICABLE -
DC5 DETERMINATION OF DESIGN LOADING FOR NON-STRUCTURAL ELEMENTS SUCH AS
AT ALL TIMES. POTHOLES ETC SHALL BE MONITORED AND REPAIRED.
NOOSA COUNCIL
CEILING AND CLADDING SYSTEMS SHALL BE THE RESPONSIBILITY OF THE CONTRACTOR
T2. CONTRACTOR'S RPEQ TO CERTIFY DESIGN AND CONSTRUCTION FOR TEMPORARY APPROVED PLAN
MCU21/0003 & OPW20/0106
DC6 FLOOD LOADING HAS BEEN DETERMINED IN ACCORDANCE WITH AS 5100 WITH NOMINAL WORKS: STRUTS, PROPPING, FORMWORK STRIPPING AND PROPPING PROCEDURES, TIE
FLOOD VELOCITY TO BE CONFIRMED BY HYDRAULIC REQUIREMENTS AS FOLLOWS: BACKS, EXCAVATION SHORING, PROTECTION WORKS, DE-WATERING SYSTEMS,
FORMWORK, EARLY LOADING OF STRUCTURES AND THE LIKE.
8 FEBRUARY 2021
-V100 = 1m/s.
© THIS DRAWING IS PROTECTED ASSOCIATED CONSULTANTS PROJECT DRAWING TITLE
UNDER COPYRIGHT IN
ACCORDANCE WITH
AGREEMENT BETWEEN LONG
VIEW CONSULTING ENGINEERS
NOOSA JETTY BUILDERS
JoB No: 1288
SHARED JETTY ON BOUNDARY
Long View PROPOSED NEW JETTY, ON SHARED BOUNDARY STRUCTURAL NOTES SHEET
8 RAVENWOOD DRIVE, & 11 KEY COURT, NOOSA HEADS
Pty. Ltd. AND THE CLIENT AS
L Consulting Engineers Pty. Ltd.
REVISIONS
NAMED HEREIN. EXCLUSIVE Address: 8 RAVENWOOD DRIVE,
USE IS GRANTED UNDER THE & 11 KEY COURT, NOOSA HEADS
AGREEMENT ONLY FOR THE
PROJECT. THIS DRAWING SHALL
LOT 160 ON N.218.59 & V Post:
ABN:
PO Box 963 Cooroy QLD 4563
98 867 060 985
DRAWN
S.T.
CHECKED
F.M.
APPROVED DATE
11/06/2020
SCALE BAR DRAWING SCALES
1:1
DRAWING SIZE
A1 ORIGINAL
NOT BE CONSTRUCTED UNLESS LOT 169 ON N.218.58 Mobile: 0414 681 676
DESCRIBED AS "CONSTRUCTION 1 PREMIMINARY ISSUE C1 F.M. Client: MICHAEL & HUGH ENGLISH Email: [email protected] DESIGNED CHECKED RPEQ / Cert. PROJECT NUMBER DRAWING NUMBER REVISION
ISSUE". Internet: www.longviewconsulting.com.au
No. DESCRIPTION REV. APP. F.M. F.M. 19951 20.001-002 S02 C1
Document Set ID: 21283229
Version: 1, Version Date: 03/11/2020
Page 3
NOTE:
LOT: 160
BOUNDARY
PROPERTY
BOUNDARIES TO BE CONFIRMED
11.666
RP: N21859
10°27'
BY CLIENT SURVEY LOT: 159
(CONSTRAINED)
RP: N21859
(CONSTRAINED)
3000
N # NOTES:
LOT: 169 750 750 3.213
97°27' 1. UNLESS NOTED OTHERWISE, ALL TIMBER SHALL BE DURABILITY
RP: N21858 2.839 3.0
m 750 750 CLASS 1 OF APPROVED SPECIES AND HAVE STRESS GRADE OF F14.
(CONSTRAINED) 84°52' 1.0
m
14.440
PROPOSED STAIRS PROPOSED STAIRS
04°38'
TRANSLATION OF 1.5m PROJECTED
1000
TO BUILDERS DETAILS. TO BUILDERS DETAILS. 2. UNLESS NOTED OTHERWISE, ALL CONSTRUCTION SHALL COMPLY WITH
45°
TJ
45°
SIDE BOUNDARY SETBACK TO TJ
THE ENVIRONMENTAL PROTECTION AGENCY'S OPERATIONAL POLICY
2.0 PROVIDE EQUITABLE WAA WIDTH
m EXISTING - "BUILDING AND ENGINEERING STANDARDS FOR TIDAL WORKS".
FROM TIDAL LAND ACCESS
4.75 REVETMENT WALL
4 CORRIDOR
110° 3. ALL STAINLESS STEEL BOLTS, SCREWS, RODS, ETC. SHALL BE APPROVED
6.085 51'
1.450 P1 MARINE GRADE 316.
P1
2546
63°39' 750 750 126°07' J1
PROPOSED VEESSEL B1 ALL OTHER STEEL WORK, INCLUDING NUTS, BOLTS, WASHERS,
SIZE BY OTHERS (6.0m x DO NOT FIX JETTY AND SCREWS SHALL BE HOT DIP GALVANIZED OR STAINLESS STEEL.
1500 HANDRAIL TO DETAIL.
2.0m) TO EXISTING RIGID HANDRAIL TO
REVETMENT WALL 4. TOP OF PILES SHALL BE SEALED AND FULLY CAP FLASHED OR RINGED WITH
P1
5 COMPLY WITH NOOSA
13 .92
P1
AN ALUMINIUM ALLOY OR STAINLESS STEEL BAND.
0m
7° 3 B1 COUNCIL REGULATIONS.
2546
15
3.
' J1
5m
D
Y
5. DIMENSIONS AND LEVELS SHALL NOT BE SCALED FROM THESE DRAWINGS.
#
PROJECTE
4
BOUNDAR
22
1.
7. °38' HIGH SET TIE-UP RAIL
56 BY OTHERS.
P1
SEABED ANCHOR B1 6. ALL LEVELS SHOWN ARE APPROXIMATE ONLY.
P1
A
11500
27.7 TO DETAIL
WA
20 ALL LEVELS SHALL BE CONFIRMED ON SITE BY THE BUILDER PRIOR TO
110°
02' CONSTRUCTION WORKS.
4. 0 0°
2546
15
J1
14
6 7. TIDAL LEVELS REFERENCE MARITIME SAFETY QLD. PUBLISHED TIDE DATA.
.73 7'
5m
0
3 °1 B1 FLOOD LEVEL RECORD FROM BOM DATA.
P1
61
1.
P1
PRO MERBAU TIMBER TIE-UP RAIL
2712
JE BY OTHERS.
BOU CTED LOT: 158 DECKING (140 x 25)
NDA ~2.
RY 0m BY BUILDER
RP: N21859 J1
ED
E CT RY B1
OJ DA (CONSTRAINED) P1
PR UN PROPOSED BOAT LIFT PROPOSED BOAT LIFT
P1
AW
13 °33
BO
15
AA W BY OTHERS (6.0m x 2.0m) BY OTHERS (4.0m x 2.0m)
.02 '
AA 150 1200
1
2
~2. TYP.
0m
AA
PROJECTED
BOUNDARY
AW
PROPOSED SHARED JETTY JETTY FRAMING PLAN JETTY LOADING CRITERIA:
REFER DETAILS 1:100
FOR DESIGN ELEMENTS JETTY LIVE LOADS: = 2.0 kPa
AA
AW
W
PROPOSED VESSEL SIZE 0m APPROVED MOORED VESSEL (MAX.)
AA
BY OTHERS (4.0m x 2.0m) 3. FRAMING SCHEDULE
NEIGHBOURING LENGTH: = 5.0m
JETTY OUTLINE
PIERS: WEIGHT: = 1500 Kg.
P1 - 200Ø HWD. PIER, H6 TREATED. BERTHING VELOCITY: = 0.5m / Sec.
(15
QU m O
BEAMS:
.0
AY FFS
NE )
LI SET AS CONSTRUCTED B1 - 150 x 75 F14 HWD. BEARER, H6 TREATED.
LIN ET
Y
A FF NOOSA RIVER NEIGHBOURING
E )
QU m O JOISTS:
5.
0 JETTY OUTLINE
(1 J1 - 150 x 75 F14 HWD. JOISTS AT 450 CRS, H6 TREATED.
TJ - 150 x 75 F14 HWD. TRIMMER JOISTS, H6 TREATED.
NOTE:
ALL EXPOSED TIMBER SHALL BE H6 TREATED.
THE HEIGHT OF PILES ABOVE NATURAL GROUND
LEGEND JETTY SITE PLAN SHALL NOT EXCEED THE PILE DEPTH IN THE
NATURAL GROUND.
# DENOTES SKEW OF PROJECTED SIDE BOUNDARY 1:100
TO ENSURE 3.0m TIDAL LAND ACCESS CORRIDOR. DO NOT FIX JETTY
HANDRAIL TO DETAIL.
TO EXISTING
WAA DENOTES PROPOSED WATER ALLOCATION AREA RIGID HANDRAIL TO
REVETMENT WALL
DESIGNED AS OPTIMUM INTERPRETATION OF COMPLY WITH NOOSA
EPP/2016/2088.V.5.01 RULES COUNCIL REGULATIONS.
PROPOSED STAIRS
AWAA DENOTES ADJACENT PROPERTY WATER RECORD FLOOD LEVEL EACH SIDE OF JETTY
ALLOCATION AREA PRESERVED. RL 2.00m AHD. TO BUILDERS DETAILS.
EXISTING WALL, CONFIRM ON SITE
FSH DENOTES FISH HABIT (NOT APPLICABLE) DECK RL 1.54m AHD.
RL 1.10m H.A.T. TOP OF WALL
RL 1.00 AHD
P1
P1
P1
P1
RL 0.44m AHD
P1
EXISTING
REVETMENT WALL
P1
P1
SEABED
STONE PITCHING SEABED
TYP.
3000
-
NOOSA COUNCIL
TYP.
3000
APPROVED PLAN
MCU21/0003 & OPW20/0106
8 FEBRUARY 2021
JETTY SIDE ELEVATION JETTY RIVER ELEVATION
1:50 1:50
© THIS DRAWING IS PROTECTED ASSOCIATED CONSULTANTS PROJECT DRAWING TITLE
UNDER COPYRIGHT IN
ACCORDANCE WITH
AGREEMENT BETWEEN LONG
VIEW CONSULTING ENGINEERS
4 CONSTRUCTION ISSUE C4 F.M.
NOOSA JETTY BUILDERS
JoB No: 1288
SHARED JETTY ON BOUNDARY
Long View PROPOSED NEW JETTY, ON SHARED BOUNDARY SITE PLAN, FRAMING PLAN, ELEVATIONS
8 RAVENWOOD DRIVE, & 11 KEY COURT, NOOSA HEADS
Pty. Ltd. AND THE CLIENT AS
L Consulting Engineers Pty. Ltd.
REVISIONS
NAMED HEREIN. EXCLUSIVE Address: 8 RAVENWOOD DRIVE,
USE IS GRANTED UNDER THE
3 CONSTRUCTION ISSUE C3 F.M. & 11 KEY COURT, NOOSA HEADS
AGREEMENT ONLY FOR THE
PROJECT. THIS DRAWING SHALL 2 CONSTRUCTION ISSUE C2 F.M. LOT 160 ON N.218.59 & V Post:
ABN:
PO Box 963 Cooroy QLD 4563
98 867 060 985
DRAWN
S.T.
CHECKED
F.M.
APPROVED DATE
14/10/2020
SCALE BAR DRAWING SCALES
1:100, 1:50
DRAWING SIZE
A1 ORIGINAL
NOT BE CONSTRUCTED UNLESS LOT 169 ON N.218.58 Mobile: 0414 681 676
DESCRIBED AS "CONSTRUCTION 1 CONSTRUCTION ISSUE C1 F.M. Client: MICHAEL & HUGH ENGLISH Email: [email protected] DESIGNED CHECKED RPEQ / Cert. PROJECT NUMBER DRAWING NUMBER REVISION
ISSUE". Internet: www.longviewconsulting.com.au
No. DESCRIPTION REV. APP. F.M. F.M. 19951 20.001-002 S03 C4
Document Set ID: 21283229
Version: 1, Version Date: 03/11/2020
Page 4
KICK BOARD 1-M16 BOLT S.S. KICK BOARD MERBAU KICK BOARD MERBAU MERBAU MERBAU MERBAU MERBAU
BY BUILDER J1 TO B1 BY BUILDER TIMBER BY BUILDER TIMBER TIMBER TIMBER TIMBER TIMBER
TYPICAL. DECKING DECKING DECKING DECKING DECKING DECKING
MIN.
100
J1 J1 J1 J1 J1 J1 J1
B1
J1
80
B1
TJ
25 1-M16 BOLT S.S. MIN.
1-M16 BOLT S.S. 1-M16 BOLT S.S. 1-M16 BOLT S.S.
B1
RECESS B1 TO P1 NOTCH J1 ENDS 150 x 150 x 10 EA BRACKET S.S.
J1 TO B1 J1 TO B1 J1 TO B1
B1
TYPICAL. 1-M16 BOLT S.S. 2-M12 BOLTS S.S. TO J1
B1
B1
25 TYPICAL. 25 PER J1 CONNECTION TYPICAL.
80 PER J1 TO P1 2-M12 BOLTS S.S. TO TJ
RECESS MIN. RECESS TYPICAL.
TYPICAL. PER J1 TO TJ CONNECTION
JOIST J1(A) SHALL TYPICAL.
BEAR ON J1(B)
P1
P1
P1
JOIST & BEAM TO PILE BEAM TO PILE JOIST TO BEAM EXTERNAL JOIST LAP INTERNAL JOIST LAP INTERNAL JOIST TO BEAM JOIST TO TRIMMER JOIST
TYPICAL DETAIL TYPICAL DETAIL TYPICAL DETAIL TYPICAL DETAIL TYPICAL DETAIL TYPICAL DETAIL TYPICAL DETAIL
1:10 1:10 1:10 1:10 1:10 1:10 1:10
-
NOOSA COUNCIL
APPROVED PLAN
100
10 ALUMINIUM BASE PLATE
MCU21/0003 & OPW20/0106
CFW TO SHS 10 PLATE GUSSET
2-M12 COACH SCREWS 100 HIGH
150
250
8 FEBRUARY 2021
FIXED TO J1 CFW TO CHS
600
HANDRAIL TO BE A FULLY 38 76.2 x 4.75 CHS
WELDED ALUMINUM FRAME. ALUMINUM TUBE
75 WIDE JOIST BELOW (RT7646410)
BUTT JOINTS & CFW ALL
1-M16 BOLT S.S. ROUND.
JETTY FIXING BASE PLATE
J1 J1 TO B1
JETTY FIXING BASE PLATE REFER TO TYPICAL DETAIL
TYPICAL.
CUT KICK BOARD SHORT
NOTCH OUT MIN. 25mm
TYPICAL PLAN DETAIL EITHER SIDE OF JETTY FIXING
DEEP SEAT AT BEARER 1:10 CONNECTION
J1
& JOIST CONNECTIONS.
TYP.
CL CL
2000 MAX. FENDER FIXINGS
6 SEAL PLATE POST SPACING TO SUPPLIERS DETAILS
CL 76.2 x 5.0 CHS PILE
CFW TO HAND RAIL
J1 EACH END 100x50x3 BOX ON FLAT
FENDER
1-M16 BOLT S.S. 150
B1 TO P1
TYPICAL.
P1
J1
B1
900
75x75x5 BOX
75x75x5 BOX
75x75x5 BOX
1-M16 BOLT S.S. SEABED ANCHORS TO BE A FULLY
J1 TO P1 WELDED ALUMINUM FRAME.
TYPICAL. MITRE JOINTS & CFW ALL ROUND.
SEABED
EMBEDMENT
1000
175
J1
P1
2-M12 S.S. BOLTS
J1
6 BASE PLATE 2-M12 S.S. BOLTS WITH OVERSIZED WASHERS
CFW TO BOX WITH OVERSIZED WASHERS TO JOIST
PROVIDE 10Ø TO JOIST
WEEPHOLE
PILE TO BEAM TO JOIST - TYPICAL VIEW ALUMINUM HANDRAIL ALUMINUM HANDRAIL HIGH SET SEABED ANCHOR
1:10
TYPICAL ELEVATION TYPICAL SECTION TYPICAL ELEVATION
1:10 1:10 1:10
© THIS DRAWING IS PROTECTED ASSOCIATED CONSULTANTS PROJECT DRAWING TITLE
UNDER COPYRIGHT IN
ACCORDANCE WITH
AGREEMENT BETWEEN LONG
VIEW CONSULTING ENGINEERS
NOOSA JETTY BUILDERS
JoB No: 1288
SHARED JETTY ON BOUNDARY
Long View PROPOSED NEW JETTY, ON SHARED BOUNDARY JETTY FRAMING DETAILS
8 RAVENWOOD DRIVE, & 11 KEY COURT, NOOSA HEADS
Pty. Ltd. AND THE CLIENT AS
L Consulting Engineers Pty. Ltd.
REVISIONS
NAMED HEREIN. EXCLUSIVE Address: 8 RAVENWOOD DRIVE,
USE IS GRANTED UNDER THE & 11 KEY COURT, NOOSA HEADS
AGREEMENT ONLY FOR THE
PROJECT. THIS DRAWING SHALL 2 CONSTRUCTION ISSUE C2 F.M. LOT 160 ON N.218.59 & V Post:
ABN:
PO Box 963 Cooroy QLD 4563
98 867 060 985
DRAWN
S.T.
CHECKED
F.M.
APPROVED DATE
18/09/2020
SCALE BAR DRAWING SCALES
1:10
DRAWING SIZE
A1 ORIGINAL
NOT BE CONSTRUCTED UNLESS LOT 169 ON N.218.58 Mobile: 0414 681 676
DESCRIBED AS "CONSTRUCTION 1 CONSTRUCTION ISSUE C1 F.M. Client: MICHAEL & HUGH ENGLISH Email: [email protected] DESIGNED CHECKED RPEQ / Cert. PROJECT NUMBER DRAWING NUMBER REVISION
ISSUE". Internet: www.longviewconsulting.com.au
No. DESCRIPTION REV. APP. F.M. F.M. 19951 20.001-002 S04 C2
Document Set ID: 21283229
Version: 1, Version Date: 03/11/2020