Appendix F. Civil Engineering Report Part 2

All Optus pits and manholes should be a minimum of 1.0m in from the back of kerb or within 15m of street
intersection after the completion of your work.

All Optus conduit should have the following minimum depth of cover after the completion of your work:-

   •   Footway                 600mm

   •   Roadway         1000mm at drain invert and at road centre crown

In cases where it is considered that these clearances cannot be maintained at the completion of works advice is to be
sought form the Optus Damages and Relocations Team



FURTHER ASSISTANCE

Assistance can be obtained by contacting Optus Network Operations Asset Analysis on 1800 505 777

Where an on-site location is provided, the owner is responsible for all costs associated with hand digging or use of
non-destructive water jet method (pot holing) to visually locate and expose Optus plant.

If plant location drawings or visual location of Optus plant by digging reveals that the location of Optus plant is
situated wholly or partly where the owner plans to work, then Optus Damages and Relocates Team must be contacted
through Optus Network Operations Asset Locations to discuss possible engineering solutions.


OPTUS ENGINEERING DRAWING SYMBOLS




Optus Communications                                                                                       Page 4 of 6